Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Press and hold FUNC / • MENU. 2. Press w / s to select [SOUND], [LIGHT ], or [OTHER] and press ENTER. 3. Press w/ s to select the mode and press ENTER. 4. Press w/ s to adjust the level. 5. Press ENTER to confirm the setting. If you want to return to the previous step, press . For [SOUND] setting You can adjust sound quality by adjusting the level BAL (left/right speaker), FAD (front/rear speaker), SW (Subwoofer), SW-F (Subwoofer frequency), A-EQ (Auto EQ). -When you set the EQ to USER 1/2 mode. : You can adjust the level of BAS (bass), MID (middle), TRB(treble). • SW (Subwoofer, MAX221UB only) You can adjust the volume of subwoofer. • SW-F (Subwoofer frequency, MAX221UB only) OFF/ SW 55 Hz/ SW 85 Hz/ SW 120 Hz You can enable the subwoofer. • A-EQ (Auto EQ) OFF/ ON AUTO EQ operates only in the music file supported with genre in the device. When you set AUTO EQ to ON, POP, CLASSIC, ROCK, or JAZZ is automatically selected according to the music genre. Operating 9 For [LIGHT] setting You can adjust the light eff ects by adjusting DIM, or DIM LV. • DIM (Dimmer) OFF / ON : You can change the brightness of the display window during the power-on status. Settings Description DIM ON The display window becomes dark. DIM OFF The display window becomes bright. • CLK (Clock) For the model RDS is not supported unit or even for a RDS supported unit. -When RDS C T information is not received and then you set CT to OFF, you can adjust the time by yourself. Set the clock as follows ; 1. Select a source to TUNER. then set CT to OFF. (Refer to the " Adjusting TUNER settings " on the page 10 for setting the C T (Clock Time) ON / OFF.) 3. Press and hold • MENU on the unit to select [OTHER] and then select CLK by rotating the volume knob. Listening to music from an external device 1. Connect an external device to the AUX jack with line input cable. 2. Select a source to AUX. 3. Play the connected Auxiliary Equipment. Preventing radical changes in volume as switching sources Only when you set AUX to ON as switching sources, you can adjust the volume level of each source to prevent radical changes in volume by selecting GAIN 0 / +6. Listening to the radio 1. Press SRC repeatedly to select a source to TUNER. 2. Press BAND repeatedly to select a desired band. 3. For manual search, press and hold Y/U on the unit until “MANUAL“ is displayed. Then press it repeatedly to 2. Press the FUNC to select the CT and select a desired frequency. Or press and hold c / v on the remote control. For auto search, press Y/U on the unit. Then “SEARCH” is displayed. (Except MW ) Or press c/ v on the remote 3 • DIM LV (Dimmer Level) : When you set 4. Set the hour by rotating the volumecontrol. 1. Press FUNC on the unit. DIM to ON, you can adjust the dimmer knob. Or press FUNC / • MENU on the remote Storing desired frequencies level. (-2, -1, 0, +1, +2) 5. Press the volume knob to confirm manually 2. Rotate the volume knob on the unit. 1. Press BAND to select a desired band control. For [OTHER] setting the hour. Operating 6. Set the minute by rotating the Or press w/ s on the remote control • AUX (Auxiliary) ON / OFF you want to store. volume knob. to set the option. (GAIN 0 / +6) 3. Press the volume knob on the unit. It is possible to use auxiliary equipment 2. Select the desired frequency by using Y/U on the unit. 7. Press the volume knob to confirm with this unit. Activate the auxiliary the minute. Or press ENTER on the remote control setting when using auxiliary equipment connected to this unit. Or use c / v on the remote -When RDS C T information is received; to confirm the setting. control. The clock is displayed according to 4. If you want to return to the previous 3. press the volume knob and rotate the • DEMO OFF / ON the RDS CT information. step, press . volume knob to select a preset station You can change the initial indication - When RDS is not supported, set the on the remote control. among 1 to 6 and then press and hold Or press on the display to information name clock according to 3 to 7 steps. the volume knob until the beep sound (function name, EQ name, etc...) while is heard. Or press and hold one of preset listening to a source. • BEEP 2ND / ALL buttons among 1 to 6 on the remote BEEP 2ND : The beep is generated control until the beep sound is heard. when a key is pressed for longer than 2 4. Repeat steps 1 to 3 to preset other seconds. stations. BEEP ALL : The beep is generated when any key is pressed. 10 Operating Note , When a station is stored on the preset numbers on which another station of the same band has already been preset, the previously preset station is automatically erased. Listening to a preset station 1. Press BAND repeatedly to select a desired band. 2. Press the volume knob on the unit. Or press ENTER on the remote control. 3. Rotate the volume knob to select a preset station. Or press w / s on the remote control. 4. Press the volume knob. Or press ENTER on the remote control. Or Adjusting TUNER settings On the unit 1...