Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
• Cancel the Rating function or change the rating level. The Remote Control does not work properly. • There is an obstacle in the path of the Remote Control and this unit. • Remove the obstacle. • The batteries in the Remote Control are exhausted. • The Remote Control is not pointed at the remote sensor of the Recorder. • Replace the batteries with new ones. • Point the Remote Control at the remote sensor of the Recorder. • The Remote Control is too far from the Recorder. • Operate the Remote Control within 23ft (7m). Camcorder image is not shown. • Camcorder is off. • Turn camcorder on and operate properly. Camcorder image via A/V input or DV IN to Recorder is not shown on TV screen. • The recorder’s source is incorrect. • Use INPUT to select input channel (AV1, AV2 or DV IN). Timer recording is not possible. • Clock in record is not set to correct time. • Set clock to correct time. • Timer has been programmed incorrectly. • Reprogram Timer. • (TIMER Record) indicator light does not appear after programming timer. • Reprogram Timer and turn the Recorder off to enable timer. 54 Symptom Cause Correction Picture or sound of broadcasting channel is weak or missing. • Antenna or cables are loose. • Tighten connections or replace cable. • Wrong Tuning Band is selected in the Recorder Setup menu. • Try [Auto Channel Set] options; see page 21 for details. Can’t play disc recorded on this Recorder on another DVD player. • The disc was recorded in Video mode. • Finalize the disc; see page 26. • Some players will not play even a finalized disc recorded in Video mode. • No solution. • The disc was recorded in VR mode. • The other player must be RW compatible in order to play it. • Discs recorded with copy-once material cannot be played on other players. • No solution. Cannot record or did not record successfully. • The remaining blank space on the disc is insufficient. • Use another disc. • The source you are trying to record is copy-protected. • You cannot record the source. • When setting the recording channel, the channel is tuned on the TV’s own tuner. • Select the channel on the Recorder’s built-in TV tuner. • When recording to a Video mode disc, programs that are copy-once protected cannot be recorded. • Use a VR mode formatted disc for copy-once material. Stereo Audio Record and/or Playback not present. • TV is not Stereo-compatible. • No solution. • Broadcast program is not in stereo format. • No solution. • Recorder A/V Out jacks are not connected to TV A/V In jacks. • Make A/V connections. Stereo is available only via A/V output from Recorder. • Recorder Audio/Video Out is not selected for viewing at the TV. • Select AUX or A/V source as TV input. • Recorder’s TV audio channel is set to SAP or MONO. • Set TV audio channel mode to Stereo. See [Changing TV Audio Channel] on page 37. Resetting the Recorder If you observe any of the following symptoms... • When the Recorder is plugged in, but the power will not turn on or off. • When the display window is not working. • When the Recorder does not operate normally. You can reset the Recorder as follows: • Press and hold the POWER button for more than five seconds. This will force the Recorder to power off. Press the POWER button again to turn the Recorder back on. • Unplug the power cord and then plug the power cord again after more than five seconds. 55 REFERENCE Specifications SpecificationsSpecifications General Power requirements AC 120V, 60 Hz Power consumption 23W Dimensions (approx.) 430 X 55 X 275 mm (16.9 x 2.2 x 10.8 inches) (w x h x d) Net Weight (approx.) 2.8 kg (6.2 lbs) Operating temperature 5°C to 35°C (41°F to 95°F) Operating humidity 5 % to 90 % Signal system NTSC, DTV standard ATSC or Clear QAM over cable Recording Recording format DVD VideoRecording, DVD-VIDEO Recordable discs DVD-ReWritable, DVD-Recordable, DVD+ReWritable, DVD+Recordable (Double Layer), DVD-Random Access Memory Recordable time DVD; Approx. 1 hour (XP mode), 2 hours (SP mode), 4 hours (LP mode), 6 hours (EP mode), 11 hours (MLP) DVD+R DL (8.5GB); Approx. 1.8 hour (XP mode), 3.6 hours (SP mode), 7.3 hours (LP mode), 9 hours (EP mode), 11 hours (MLP) Video recording format Sampling frequency 27MHz Compression format MPEG 2 (VBR support) Audio recording format Sampling frequency 48kHz Compression format Dolby Digital DVD Specifications Laser system Semiconductor laser, wavelength 650 nm Frequency response DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHz Signal-to-noise ratio More than 95dB Harmonic distortion Less than 0.008% Dynamic range More than 90 dB 56 57 REFERENCE Inputs ANTENNA IN Antenna or CATV input, 75 ohms VIDEO IN (AV1,2) 1.0 Vp-p 75 ohms, sync negative, RCA jack x 2 AUDIO IN (AV1,2) - 6.0 dBm more than 47 kohms, RCA jack (L, R) x 2 DV IN 4 pin (IEEE 1394 standard) USB IN 4 pin (USB 1.1 standard) Outputs VIDEO OUTPUT 1 Vp-p 75 ., sync negative, RCA jack x 1 S-VIDEO OUTPUT (Y) 1.0 V (p-p), 75 ., negative sync, Mini DIN 4-pin x 1 (C) 0.286 V (p-p) 75 .COMPONENT OUT...