|
Fotos und technische Daten Sony RDR-HXD890 |
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
2 Press M to move the cursor to the Menu Bar. 3 Select “Editor” using ,. “Editor” 4 Press ENTER. 5 Press , to move the cursor to the right column. 6 Select the programme position you want to check using M/m. To change the input source, press the red button (“Source”). To change the programme position, press the green button (“Prog. No.”), then enter a programme position number using the number buttons, and press ENTER. z Hint To receive from the recorder a programme position that can be received by either the set top box receiver or the recorder, change the input source in step 6. Disabling programme positions (Editor) If any programme positions are unused or contain unwanted channels, you can hide them. 1 After step 4 of “Checking programme positions (Editor),” in the left column, select the programme position you want to hide or display using M/m. 2 Press the red button (“On/Off”). The disabled positions will turn grey. To show the disabled positions, press the red button (“On/Off”) again. b Notes • You cannot record a programme position if it is not set in “Aerial Reception Settings (Analog Tuner)” (page 127) even if it is set to “On” in the “Editor” in the Menu Bar. • If you are using your set top box receiver to receive programmes (when the set top box receiver is connected to the recorder using a SCART cord only, page 20) and are able to receive the same programme with both the set top box receiver and the recorder, change the “Source” to receive the programme with the recorder’s tuner. GUIDE Plus+ (For analogue broadcasting/ in areas with GUIDE Plus+ only) Recording (For analogue broadcasting) Recording (For analogue broadcasting) Timer Recording (GUIDE Plus+/Manual) HDD +RW RWVR RWVideo +R RVR RVideo You can set the timer for a total of 32 programmes (8 programmes when using the VPS/PDC function), up to 30 days in advance. Methods to set the timer include: • One Button Recording (GUIDE Plus+ system) • Setting the timer manually (GUIDE Plus+ system) Before you start recording… • Check that the disc has enough available space for the recording (page 43). For the HDD, DVD+RWs, and DVD-RWs, you can free up disc space by erasing titles (page 82). • Adjust the recording picture quality if necessary (page 120). • Turn on the set top box receiver and connect the set top box controller, when the recorder is connected to a set top box receiver and you want to record using the GUIDE Plus+ system. b Note Do not operate your set top box receiver just before or during a timer recording. This may prevent the accurate recording of a programme. Red button Green button Yellow button GUIDE TIMER Dieses Handbuch ist für folgende Modelle:
DVD-Player - RDR-HXD1090 (7.86 mb)
DVD-Player - RDR-HXD790 (7.86 mb)
DVD-Player - RDR-HXD795 (7.86 mb)
DVD-Player - RDR-HXD895 (7.86 mb)