Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
The frequencies move up or down step by step. Storing and recalling broadcast frequencies You can easily store up to 6 broadcast frequencies for later recall at the touch of a button. 1 Press BAND to select desired band you want to store. 2 Select the desired frequency. 3 Press one of preset buttons 1~6 and hold until the beep sound. The number you have pressed will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory. 4 Repeat steps 1~3 to preset other stations. The next time, you press the same preset button, the radio station frequency is recalled from the memory. Note • Up to 18 FM stations, 6 for each of three FM bands and 6 MW(AM) stations can be stored in the memory. • When a station is stored on the preset numbers on which another station of the same band has already been preset, the previously preset station is automatically erased. Auto search memory This function lets you automatically store the 6 strongest broadcast frequencies. 1 Press U UU/AS until “AUTO STORE” appears. The six strongest broadcast frequencies will be stored under preset button 1~6 in the order of their signal strength. 2 To cancel, press U UU/AS. To scan the preset stations Press u uu/PS. Each preset station appears. To cancel, press u uu/PS. To tune in the preset stations Press BAND to select the desired band and press the desired preset button 1~6. The preset station of the preset button 1~6 is displayed and the preset station is received. 15 RDS operation RDS operation RDS Display options In normal RDS operation the display will indicate the station name. Pressing DISP enables you to cycle through the various data types in the following sequence: CT t FREQUENCY t PTY t RT t PS • CT (Time controlled by the channel) • PTY (Programme type recognition) • RT (Radio text recognition) • PS (Programme Service name) • PI (Programme Identification) • AF (Alternative Frequencies for the actual programme) • TP (Traffic programme Identification) • TA (Traffic Announcement Identification) PTY (Programme Type) function To select a certain program type out of the reception band, the following procedure can be used. 1 Press and hold TA/PTY to select a programme types. 2 After, press and hold TA/PTY repeatedly for selecting each mode. Music group t Speech group t Search off 3 Press one of preset buttons 1-6 Each time this button is pressed, the display mode changes as follows. No Music group No Speech group 1. 2. 3. 4. 5. 6. Pop M, Rock M Easy M, Light M. Classics, Other M Jazz, Country Nation M, Oldies Folk M 1. 2. 3. 4. 5. 6. News, Affairs, Info Sport, Educate, Drama Culture, Science, Varied Weather, Finance, Children Social, Religion, Phone In Travel, Leisure, Document Note RDS is only available for FM reception. TA (Traffic Announcement) function TA reception allows the unit to switch temporarily to a Traffic Announcement from the current source (another FM station, CD, or other connected components). To switch the TA (Traffic Announcement) function on or off, press TA/PTY. • TA ON Traffic programs and announcements can be automatically received using TP/TA features. • TA OFF Traffic programs and announcements can not be received by using TP/TA features. 16 CD/MP3/WMA operation CD/MP3/WMA operation Playing an Audio CD and MP3/WMA Disc The unit can play MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the notes on MP3/WMA Recordings on page 21. If you change the source, CD play also stops (without ejecting the CD). Next time you select “CD” as the source, CD play starts from where playback has been stopped previously. • To directly play a file, press NUMBER (#) on remote control and then press the track number with 0-9 number. Pause 1 Press B BB/X during playback. 2 To return to playback, press B BB/X again. Skip to next track/file Press briefly i ii (M M? on the remote control) to select the next track or file. Skip to previous track/file Press briefly I II (?m m on the remote control) within 3 seconds of playing time. Return to the beginning of the current track/file Press briefly I II (?m m on the remote control) after 4 seconds of playing time. Search Press and hold I II/i ii (?m m/M M? on remote control) for about 1 second during playback and then release at the point you want. Intro scan The first 10 seconds of each tracks/files (SCAN) or each files in the current selected folder ( SCAN) on the disc are played. 1 Press SCAN. 2 WMAMP3 CDWMAMP3– SCAN (or SCAN ) appears on the display window. Press and hold SCAN for about 2 seconds during playback. – SCAN appears on the display window. Press SCAN again. – SCAN or SCAN disappear from the display window and the intro scan is cancelled. Repeat The current selected tracks/files (1 RPT) or folder ( RPT) on the disc is played repeatedly. 1 Press RPT during playback. – 1 RPT appears on the display window. CD MP3 WMA 2 Press and hold RPT for about 2 seconds during playback. –...