Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
– SCAN appears on the display window. Press SCAN again. – SCAN or SCAN disappear from the display window and the intro scan is cancelled. Repeat The current selected tracks/files (1 RPT) or folder ( RPT) on the disc is played repeatedly. 1 Press RPT during playback. – 1 RPT appears on the display window. CD MP3 WMA 2 Press and hold RPT for about 2 seconds during playback. – RPT appears on the display window. MP3 WMA 3 Press RPT again. – 1 RPT or RPT disappear from the display window and the repeat mode is cancelled. 14 Shuffle All of the tracks/files (SHF) or the current selected folder ( SHF) on the disc is played randomly. 1 Press SHF during playback. – SHF WMAMP3 (or SHF CD ) appears on the display window. Press and hold SHF for about 2 seconds during playback. – SHF appears on the display window. 2 Press SHF again. WMAMP3 – SHF or SHF disappear from the display window and the random playback is cancelled. Note During random playback, if you press -[ [[b bb (?m m on remote control), you won’t go back to the previous track. CD TEXT / ID3 TAG When playing a disc containing information, you can see the CD TEXT/ID3 TAG information. In CD TEXT, information about the disc (disc title, performer and track title) is recorded. In a ID3 TAG, information about the file (Alburm title/ Song title/ Performer name) is recorded. In a WMA Content, information about the file (Song title/ Performer name) is recorded. If there is no information, “NO TEXT” will be shown in the display window. Press DISP (DISP. on the remote control) repeatedly during MP3/WMA/CD TEXT file playback. To go to a particular quickly (+10/-10 steps) WMAMP3 (If there is no folder or one folder.) Press F+ to skip to the next 10 track, and press F-to skip to the previous 10 track. To skip to the next or previous folder WMAMP3 (If there are more than two folders.) Press F+ to skip to the next folder, and press F-to skip to the previous folder. Note Time display appearing on the display part when playing VBR file may vary and there may be some difference from actual time (both progress time and VBR are displayed at the same time when playing file). 15 Troubleshooting : Symptom / : Cause The loaded disc is of a type this unit : Correction cannot play. Co Check what type the disc. Sy Power doesn’t turn on. / The unit doesn’t operate. Sy No sound is heard. / The volume Ca Leads and connectors are not properly level will not rise. connected. Ca Cables are not connected correctly. Co Confirm once more that all Co Connect the cables correctly. connections are correct. Ca The fuse is blown. Sy There’s no sound. Co Rectify the problem that caused the Ca The volume level is low. fuse to blow, and then replace it. Be very Co Adjust the volume. sure to install the correct fuse with the same rate. Sy There’s audio skipping. Ca Noise and other factors are causing Ca This unit is not firmly secured. the built-in microprocessor to operate Co Secure this unit firmly. incorrectly. Co Turn the unit off and then on. Sy The unit does not operate correctly even when the appropriate remote Sy Playback is not possible. control buttons are pressed. Ca The disc is dirty. Ca Battery power is low. Co Clean disc. Co Load new battery. Specifications GENERAL Ca Co Sy Ca Output Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50W x 4CH (Max.) Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DC 12V Speaker impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4. Ground System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Negative Dimensions (W x H x D) . . . . . . . . . . . . . . . . . . . . . .181.5 x 50 x 200 mm (Without Control Panel) Net Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5 kg CD SECTION Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Hz-20 kHz S/N Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 dB Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.12% Channel Separation (1kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 dB RADIO SECTION FM Frequency Range . . . . . . . . . . . . . . . . . . . . . .87.5-107.9, 87.5-108, 65-74 or 87.5-108 MHz S/N Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 dB Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.7% Usable Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....