Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
To pause recording Press the button to pause a recording in progress. Press the button again to resume recording. You can switch channels by pressing the PROG (/) buttons while recording pauses. To stop recording Press the STOP ( ) button to stop or finish a recording in progress. When using DVD-RAM/DVD-RW/DVD-R discs, the message ‘Updating the information of disc. Please wait for a moment’ is displayed. Recording from external equipment you are watching Check that the disc has enough available space for the recording. Adjust the recording mode. 1 Press the OPEN/CLOSE button, place a recordable disc on the disc tray. 2 Press the OPEN/CLOSE button to close the disc tray. Wait until “LOAD” disappears from the front panel display. If an unused DVD-RAM disc is used, whether to format or not will be asked first. (See page 37) If an unused DVD-RW disc is used, whether to initialize or not will be asked first. (See page 37) 3 Press the INPUT button to select the input source according to the connection you made. The front panel display changes in the following sequence: PR Number L1 L2 DV If you connect a digital camcorder, press the INPUT button to select DV. (See page 41) 4 Press the REC MODE button repeatedly, (or press the REC MODE button, then press the …† button) to select the recording speed(quality). SP LP EP XP Before you start Record Mode SP (02:12) You can not change the recording mode and input source while recording or Pause. Recording will stop automatically if there is no free space left for recording. Up to 99 titles can be recorded onto a disc. Recording will stop automatically if a copy protected image is selected. DVD-RAM/DVD-RW discs must be formatted before starting to record. Most new discs are sold unformatted. Do not use DVD-R authoring discs with this unit. NOTE 5 Press the REC button. To pause recording Press the button to pause a recording in progress. Press the button again to resume recording. You can switch channels by pressing the PROG (/) buttons while recording pauses. To stop recording Press the STOP ( ) button to stop or finish a recording in progress. When using DVD-RAM/DVD-RW/DVD-R discs, the message ‘Updating the information of disc. Please wait for a moment’ is displayed. Recording from external equipment you are watching Check that the disc has enough available space for the recording. Adjust the recording mode. 1 Press the OPEN/CLOSE button, place a recordable disc on the disc tray. 2 Press the OPEN/CLOSE button to close the disc tray. Wait until “LOAD” disappears from the front panel display. If an unused DVD-RAM disc is used, whether to format or not will be asked first. (See page 37) If an unused DVD-RW disc is used, whether to initialize or not will be asked first. (See page 37) 3 Press the INPUT button to select the input source according to the connection you made. The front panel display changes in the following sequence: PR Number L1 L2 DV If you connect a digital camcorder, press the INPUT button to select DV. (See page 41) 4 Press the REC MODE button repeatedly, (or press the REC MODE button, then press the …† button) to select the recording speed(quality). SP LP EP XP Before you start Record Mode SP (02:12) You can not change the recording mode and input source while recording or Pause. Recording will stop automatically if there is no free space left for recording. Up to 99 titles can be recorded onto a disc. Recording will stop automatically if a copy protected image is selected. DVD-RAM/DVD-RW discs must be formatted before starting to record. Most new discs are sold unformatted. Do not use DVD-R authoring discs with this unit. NOTE 40- English Recording 5 Select the Play icon on the upper part of the screen to playback the camcorder and find the starting position to copy. You can press the PLAY button of the remote control to play the camcorder. 6 To start recording, use the oe v to select ( ) icon in the top side of the screen, then press the OK button. You can press the REC button of the remote control to start recording. To display playback related icons on the screen, press any direction button on the remote control. To stop recording Press the STOP ( ) button to stop or finish a recording in progress. When using DVD-RAM/DVD-RW/DVD-R discs, the message ‘Updating the information of disc. Please wait for a moment’ is displayed Copying from a Camcorder You may control the Camcorder using the IEEE1394 (DV) interface. Check that the disc has enough available space for the recording. Adjust the recording mode. 1 Press the OPEN/CLOSE button, place a recordable disc on the disc tray. 2 Press the OPEN/CLOSE button to close the disc tray. Wait until “LOAD” disappears from the front panel display. If an unused DVD-RAM disc is used, whether to format or not will be asked first. (See page 37.) If an unused DVD-RW disc is used, whether to initialize or not will be asked first. (See page 37.) 3 Press the REC MODE button repeatedly, (or...
Dieses Handbuch ist für folgende Modelle:DVD-Player - DVD-R121 (7.77 mb)