Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
. The Disc will be played in full. Ratings 1 (child safe) to 8 (adults only): The disc contains scenes not suitable for children. If you set a rating for the player, all scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, play will stop and the 4-digit code has to be entered. Access control Status window Low power standby Sound mode Display PBC Child lock Parental level Change country Change code 6 Press OK or t (left cursor) to confirm and press t (left cursor) again to exit the menu. Country 1 In Stop mode, select Access Control in the Features menu s using the w/v (down/up) keys and press u (right cursor). 2 Enter your 4-digit Pincode. 3 Move to Change Country using the w (down) key. 4 Press the u (right) key. 5 Select a country using w/v (down/up cursor). 6 Press OK or t (left cursor) to confirm and press t (left cursor) again to exit the menu. Changing the 4-digit code 1 In Stop mode, select Access Control in the Features menu s using the w/v (down/up) keys and press u (right cursor). 2 Enter the old code. 3 Move to Change Code using the w (down) key. 4 Press the u (right) key. 5 Enter the new 4-digit PIN code. 6 Enter the code a second time and reconfirm with OK. 7 Press t (left cursor) to exit the menu. Note: If you forgot your code, press 9 STOP four times while in the access control PIN code box and exit with OK. Access control is now switched off. You can then enter a new code (twice!) as described above. 26 OPERATION -VIDEO Loading DVD or VCD discs STOP PLAY PAUSE REPEAT PREV NEXT OPEN/CLOSE 1 Press / OPEN/CLOSE on the front of the player. The disc loading tray opens. 2 Lay the disc in the tray, label side up (also when a double sided DVD disc is inserted). Make sure it is sitting properly in the correct recess. 3 Gently push the tray, or press / OPEN/CLOSE, to close the tray. . READING appears in the status window and on the player display and playback starts automatically. Note: If a DVD disc is inserted and ‘Disc Lock’ is set to ON while the disc inserted is not in the ‘child safe’ list (not authorized), the PIN code must be entered and/or the disc has to be authorized. (see ‘Access Control’) Playing a DVD-video disc Playing a title . After inserting the disc and closing the tray, playback starts automatically and the status window and the player display show the type of disc loaded as well as information about the disc’s contents and playing time. The disc may invite you to select an item from a menu. If the selections are numbered, press the appropriate numerical key 0-9; if not, use the w/v, t/u (down/up/left/right) keys to highlight your selection, and press OK. . The currently playing title and chapter number are displayed in the menu bar and the player display. The elapsed playing time is shown in the status window and the player display. . At the beginning of each title the number of front channels and surround channels will be displayed (e.g. 3/2). If a subwoofer channel is present this will also be displayed (+1). . If during play the audio format (MPEG 2, Dolby Digital, etc.) of a title changes this will be indicated on the display. . If required, you can use the SOUND MODE key to select Stereo, Dolby Surround, 3D-Sound or Multi-channel reproduction. Play may stop at the end of the Title, this can result in return to menu. . To stop play at any time, press 9 STOP. . The default screen will then appear, giving information about the current status of the player. . You can resume play from the point at which you stopped by pressing e RESUME. . The resume feature applies, not only to the disc in the player, but also to the last four discs you have played. Simply reload the disc, press 2 PLAY and when you see the Resume icon e on the screen, press 2 PLAY again. Note: Since it is usual for DVD movies to be released at different times in different regions of the world, all players have region codes and discs can have an optional region code. If you load a disc of a different region code to your player, you will see the region code notice on the screen. The disc will not play, and should be unloaded. Playing a video CD Playing a disc -After inserting the disc and closing the tray, playback starts automatically and the status window and the player display show the type of disc loaded as well as information about the disc’s contents and playing time -The disc may invite you to select an item from a menu. If the selections are numbered, press the appropriate numerical key 0-9. -The currently playing track number is displayed in the menu bar and the player display. The elapsed playing time is shown in the status window and the player display. . If required, you can use the SOUND MODE key to select Stereo, Dolby Surround or 3D-Sound reproduction. . To stop play at any time, press 9 STOP. . The default screen will the...