Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
In order to make the complete set ‘child safe’, each volume has to be authorized. Deauthorizing discs ¶ Inser t the disc. See ‘Loading discs’. . Playback star ts automatically. ¶ Press 9 while { is visible. . The | will appear and the disc is now deauthorized. Access Control: Parental Control (DVD Video only) Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain ‘Parental Control’ information which applies to the complete disc or to cer tain scenes on the disc. These scenes are rated from 1 to 8, and alternative, more suitable scenes are available on the disc. Ratings are countr y dependent. The ‘Parental Control’ feature allows you to prevent discs from being played by your children or to have cer tain discs played with alternative scenes. 22 ACCESS CONTROL Activating/Deactivating Parental Control 1 When disc playback is stopped, select ACCESS CONTROL in the features menu using the 3/4 keys. 2 Enter your 4-digit code. If necessar y, enter the code a second time. 3 Move to Parental Control using the 3/4 keys. 4 Move to VALUE ADJUSTMENT (1-8) using the 2 key. 5 Then use the 3/4 keys or the numerical keys on the remote control to select a rating from 1 to 8 for the disc inser ted. Rating 0 (displayed as ‘– –’): Parental Control is not activated. The Disc will be played in full. Ratings 1 to 8: The disc contains scenes not suitable for children. If you set a rating for the player, all scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback will stop and the 4-digit code has to be entered. 6 Press OK or 1 to confirm, then press 1 again to exit the menu. Country 1 When disc playback is stopped, select ACCESS CONTROL in the features menu using the 3/4 keys. 2 Enter the 4-digit code. 3 Move to CHANGE COUNTRY using the 4 key. 4 Press the 2 key. 5 Select a countr y using 3/4. 6 Press OK or 1 to confirm, then press 1 again to exit the menu. Changing the 4-digit code 1 When disc playback is stopped, select ACCESS CONTROL in the features menu using the 3/4 keys. 2 Enter the old code. 3 Move to CHANGE CODE using the 4 key. 4 Press the 2 key. 5 Enter the new 4-digit code. 6 Enter the code a second time and reconfirm by pressing OK. 7 Press 1 to exit the menu. If you forget your 4 digit code 1 Press 9 to exit the ‘Child Protect’ screen. 2 Select ACCESS CONTROL in the features menu using the 3/4 keys. 3 Move to ENTER CODE using the 2 key. 4 The 4-digit code can be cancelled by pressing 9 four times in the ‘Access Control-Enter Code’ dialog. 5 You can then enter a new code (twice!) as described above (Changing the 4 digit code). Parental Control Disclaimer This DVD player features the PARENTAL CONTROL system which is intended to activate when playing DVD discs furnished with cer tain software coding. This is according to technical standards adopted by the set maker and disc content industries. Please note that the PARENTAL CONTROL system will not operate a DVD disc which is not furnished with the appropriate software coding. Also note that at the time of release of this DVD player, cer tain aspects of the technical standards had not been settled between set makers and the disc industries. On this basis, Philips cannot guarantee the functioning of the PARENTAL CONTROL system and denies any liability associated with unintended watching of disc content. If in doubt, please make sure the disc plays according to your PARENTAL CONTROL settings before you allow children access to the player. English ACCESS CONTROL 23 English Before Requesting Service If it appears that the DVD Video player is faulty, first consult this checklist. Something may have been overlooked. Under no circumstances should you attempt to repair the system yourself; this will invalidate the warranty. Look for the specific symptom(s). Then perform only the actions listed to remedy the specific symptom(s). Symptom Remedy No power – Make sure the power cord is properly connected. – Check if there is power at the AC outlet by plugging in another appliance. No picture – Check if the TV is switched on. – Check the video connection. Distorted picture – Check the disc for fingerprints and clean the disc with a soft cloth, wiping from the centre to the edge in a straight line. – Sometimes a small amount of picture distor tion may appear .This is not a malfunction. Completely distorted picture – If the picture is distor ted completely or if the picture rolls ver tically, or no colour with player menu make sure the NTSC/PAL setting at the DVD player matches the video signal of your television. – If your TV video signal is NTSC, select the NTSC setting at the DVD player. – If your video signal is PAL, select the PAL setting. - See NTSC/PAL SETTINGS. – Check video output option in Personal Preferences is matching with actual connection. Distorted or bla...