Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
S Video Inputs S-video signals. .Line3 Output Selects a method of outputting video signals for the LINE 3/DECODER jack. Video Outputs video signals. S Video Outputs S-video signals. Audio Settings (Audio) The Audio Setup allows you to adjust the sound according to the playback and connection conditions. 1 Press SYSTEM MENU while the recorder is in stop mode. 2 Select “SETUP,” and press ENTER. 3 Select “Audio,” and press ENTER. The Audio Setup appears with the following options. The default settings are underlined. SETUP Settings Audio ATT : Off Video Audio DRC : Standard Audio Downmix : Dolby Surround Features Digital Out :On Options Dolby Digital :D-PCM MPEG :PCM Easy Setup DTS : Off Audio ATT (attenuation) If the playback sound is distorted, set this item to “On.” The recorder reduces the audio output level. This function affects the output of the following jacks: – LINE 2 OUT AUDIO L/R jacks –LINE 1-TV jack – LINE 3/DECODER jack On Select this when the playback sound from the speakers is distorted. Off Normally select this position. Audio DRC (Dynamic Range Control) (DVDs only) Makes the sound clear when the volume is turned down when playing a DVD that conforms to “Audio DRC.” This affects the output from the following jacks: – LINE 2 OUT AUDIO L/R jacks – LINE 1-TV jack – LINE 3/DECODER jack – DIGITAL OUT (OPTICAL or COAXIAL) jack only when “Dolby Digital” is set to “D-PCM” (page 92). Standard Normally select this position. TV Mode Makes low sounds clear even if you turn the volume down. Wide Range Gives you the feeling of being at a live performance. Downmix (DVDs only) Switches the method for mixing down to two channels when you play a DVD which has rear sound elements (channels) or is recorded in Dolby Digital format. For details on the rear signal components, see “Checking the Play Information and Playing Time” (page 38). This function affects the output of the following jacks: – LINE 2 OUT AUDIO L/R jacks – LINE 1-TV jack – LINE 3/DECODER jack – DIGITAL OUT (OPTICAL or COAXIAL) jack when “Dolby Digital” is set to “D-PCM” (page 92). Dolby Normally select this Surround position. Multi-channel audio signals are output to two channels for enjoying surround sounds. Normal Multi-channel audio signals are downmixed to two channels for use with your stereo. Settings and Adjustments ,continued Digital Out Selects if audio signals are output via the DIGITAL OUT (OPTICAL or COAXIAL) jacks. On Normally select this position. When you select “On,” see “To set the digital output signal” for further settings. Off The influence of the digital circuit upon the analogue circuit is minimal. .To set the digital output signal The following setup items switch the method of outputting audio signals when you connect a component such as an amplifier (receiver) with a digital input jack. For connection details, see “Connecting the Audio Cords” (page 17). Select “Dolby Digital,” “MPEG,” and “DTS” after setting “Digital Out” to “On.” SETUP Settings Audio ATT : Off Video Audio DRC : Standard Audio Downmix : Dolby Surround Features Digital Out :On Options Dolby Digital :D-PCM MPEG :PCM Easy Setup DTS : Off If you connect a component that does not accept the selected audio signal, a loud noise (or no sound) will come out from the speakers, and may affect your ears or cause speaker damage. • Dolby Digital (HDD/DVDs only) Selects the type of Dolby Digital signal. • MPEG (DVD VIDEO only) Selects the type of MPEG audio signal. PCM Select this when the recorder is connected to an audio component without a built-in MPEG decoder. If you play MPEG audio sound tracks, the recorder outputs stereo signals via the DIGITAL OUT (COAXIAL) jack. MPEG Select this when the recorder is connected to an audio component with a built-in MPEG decoder. • DTS (DVD VIDEO only) Selects whether or not to output DTS signals. On Select this when the recorder is connected to an audio component with a built-in DTS decoder. Off Select this when the recorder is connected to an audio component without a built-in DTS decoder. Note When you use the DIGITAL OUT (COAXIAL) jack to listen to MPEG audio signals and set “MPEG” to “MPEG” in Audio Setup, no sound will come from your speakers if you select one of the TVS modes. D-PCM Select this when the recorder is connected to an audio component lacking a built-in Dolby Digital decoder. You can select whether the signals conform to Dolby Surround (Pro Logic) or not by making adjustments to the “Downmix” item in Audio Setup (page 91). Dolby Select this when the recorder Digital is connected to an audio component with a built-in Dolby Digital decoder. Recording and Parental Control Settings (Features) The Features Setup allows you to adjust recording and parental control settings. 1 Press SYSTEM MENU while the recorder is in stop mode. 2 Select “SETUP,” and press ENTER. 3 Select “Features,” and press ENTER. The Features Setup appears with the following options. The default settings are underlined. SETUP Settings TV Direct Re...
Dieses Handbuch ist für folgende Modelle:DVD-Player - RDR-HX1000 (1.87 mb)