Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
DVD-Player - DVP-NS955V (4.55 mb)
DVD-Player - DVP-NS955V (3.07 mb)
Anleitung Zusammenfassung
See the explanations given for each item in the following section. . For 2 speaker setups • TVS DYNAMIC •TVS WIDE • TVS NIGHT • TVS STANDARD . For 4 to 6 speaker setups (If you select “NONE” in the setting of “REAR” in “SPEAKER SETUP” (page 87), you cannot select these modes.) • NORMAL SURROUND • ENHANCED SURROUND • VIRTUAL REAR SHIFT • VIRTUAL MULTI REAR • VIRTUAL MULTI DIMENSION To cancel the setting Select “OFF” in step 2. For 2 speaker setups When you connect a stereo TV or 2 front speakers, TVS (TV Virtual Surround) lets you enjoy surround sound effects by using sound imaging to create virtual rear speakers from the sound of the front speakers (L: left, R: right) without using actual rear speakers. TVS was developed by Sony to produce surround sound for home use using just a stereo TV. If the player is set up to output the signal from the DIGITAL OUT (OPTICAL or COAXIAL) jack, the surround effect will be heard only when “DOLBY DIGITAL” and “DTS” are set to “D-PCM” and “MPEG” is set to “PCM” in “AUDIO SETUP”(page 86). .TVS DYNAMIC Creates one set of virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below). This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV. TV .TVS WIDE Creates five sets of virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below). This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV. TV TV .TVS NIGHT Large sounds, such as explosions, are suppressed, but quieter sounds are unaffected. This feature is useful when you want to hear the dialogue and enjoy the surround sound effects of “TVS WIDE” at low volume. .TVS STANDARD Creates three sets of virtual rear speakers from the sound of the actual front speakers (L, R) as shown below. This mode is effective when you use 2 separate front speakers. L R .NORMAL SURROUND Software with 2 channel audio signals is decoded with the Dolby Surround (Pro Logic) decoder to create surround effects. The rear speakers will emit identical monaural sounds. If you are using a centre speaker, the appropriate sounds for the centre speaker will be delivered. LR LS RS .ENHANCED SURROUND Provides a greater sense of presence from a Dolby Surround (Pro Logic) source with a monaural rear channel signal. Produces a stereo like effect in the rear channels. .VIRTUAL REAR SHIFT Shifts the sound of the rear speakers away from the actual speaker position. The shift position differs according to “REAR” or “SIDE” setting of the rear speakers (page 87). REAR LR Sound Adjustments L: Front speaker (left) R: Front speaker (right) : Virtual speaker For 4 to 6 speaker setups You can enjoy the following surround effects by using the 2 front speakers and 2 rear speakers. Connect the player to the amplifier (receiver) with the D-1 connection (page 26). You can experience Dolby Surround (Pro Logic) sounds or Digital Cinema Sound (DCS). DCS uses sound imaging to shift the sound of the rear speakers away from the actual speaker position or create entire sets of virtual rear speakers from one set of actual rear speakers. “VIRTUAL REAR SHIFT,” “VIRTUAL MULTI REAR,” and “VIRTUAL MULTI DIMENSION” make use of this technology. LS RS SIDE LR LS RS ,continued .VIRTUAL MULTI REAR Creates an array of virtual rear speakers from a single set of actual rear speakers. The position of the virtual rear speakers differs according to “REAR” or “SIDE” setting of the rear speakers (page 87). REAR L R LS RS SIDE L R LS RS .VIRTUAL MULTI DIMENSION Creates an array of virtual rear speaker positions higher than the listener from a single set of actual rear speakers. This mode creates five sets of virtual speakers surrounding the listener at approximately a 30° angle of elevation. The effect differs according to “REAR” or “SIDE” setting of the rear speakers (page 87). REAR LR LS RS SIDE L R LS RS L: Front speaker (left) R: Front speaker (right) LS: Rear speaker (left) RS: Rear speaker (right) : Virtual speaker Notes • When you select one of the surround modes, turn off the surround setting of the connected TV or amplifier (receiver). • Not all discs will respond to the “TVS NIGHT” function in the same way. • To enjoy the multichannel audio through the 5.1CH OUTPUT jacks, correctly set each speaker position and distance (page 26, 87). • When the playing signal does not contain a signal for the rear speakers, you cannot hear the TVS effect. • When you select one of the TVS modes, the player does not output the sound of centre speaker. • Make sure that your listening position is between and at an equal distance from your speakers, and that the speakers are located in similar surroundings. • If you use the DIGITAL OUT (OPTICAL or COAXIAL) jack and set “DOLBY DIGITAL” to “DOLBY DIGITAL,” “DTS” to “DTS,” and “MPEG” to “MPEG” in “AUDIO SETUP,” sound...
Dieses Handbuch ist für folgende Modelle:DVD-Player - DVP-LS785V (1.52 mb)