Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
2 Press OK again. » “0” is displayed behind [Old Password] as the first digit of old password. 3 Press / to set a value (0-9) to the first digit. 4 Press 5 Repeat steps 3 and 4 to enter the 6-digit old password. 6 Repeat steps 3 and 4 to enter the new password behind [New Password]. 7 Repeat steps 3 and 4 to enter the new password behind [Confirm PWD]. [DivX Subtitle] - Select a character set that suppor ts the subtitle of your DivX video. [Version Info] - Display the information about software version of this player. [Default] - Reset all settings to factor y default, except for the settings for [Disc Lock], [Parental Control], and [Password]. EN 21 Software update Note • Power supply must not be interrupted during software update. Check the current software version of this player, and then go to the Philips website for information about software update. Check the current software version 1 Press . 2 Select , and then press OK. 3 Select [Preference] > [Version Info], and then press OK. Model File Name Version RISC Servo Region Code DVP3880-12 DVP3880_12.BIN 12.11.30.14 0E.00.01.04 57.18.0D.C7 2 OK 14 4 Write down the last two digits “XX” behind [Version] (for example, “14” in the graphic above). » The version of current software is V XX. Perform the update 1 Go to w w w.philips.com/suppor t. 2 Search for suppor t information with “DVP3880K /51” as the keywords. 3 Click the search result to display available suppor t information. 4 Read the Firmware Upgrade Readme File and follow the instructions to complete the software update. 22 EN Troubleshooting English Warning • Risk of electric shock. Never remove the casing of the player. To keep the warranty valid, never tr y to repair the player yourself. If you have problems using this player, check the following points before you request ser vice. If you still have a problem, register your player and get suppor t at If you contact Philips, you will be asked for the model and serial number of this player. The model number and serial number are on the back of this player. Write the numbers here: Model No. __________________________ Serial No. ___________________________ No picture. • Refer to the TV user manual for how to select the correct video input channel. • Switch to the default mode if the progressive scan setting or the T V system setting is changed. No picture on HDMI connection. • If this player is connected to an unauthorized display device, the audio/video signal cannot be output. • If the HDMI cable is faulty, replace it with a new HDMI cable. • If you have changed the setting for HDMI video resolution, switch to its default mode. No sound output from the TV. • Make sure that the audio cables are connected to the audio input sockets that are grouped with the selected video input sockets. No sound on HDMI connection. • If the connected device is non-HDCP compliant or only DVI-compatible, no sound can be heard from the HDMI output. • Make sure that [HDMI Audio] is set to [On]. No sound during DivX video playback. • The audio codes are not suppor ted. Disc or USB storage device cannot be read. • Make sure that this player suppor ts the disc or USB storage device. (Refer to “ Specifications” > “Playable media”) • For a recorded disc, make sure that the disc is finalized. Recorded files (JPEG, MP3,WMA) cannot be played or read. • Make sure that the file was recorded in the format of UDF, ISO9660, or JOLIET. • Make sure that the number of files does not exceed the limitation (648 files maximum). • Make sure that this player suppor ts these files. (Refer to “ Specifications” > “Playable media”) EN 23 Troubleshooting DivX video files cannot be played. • Make sure that the DivX video file is complete and the file ex tension is correct. • DRM-protected video files that are stored on a USB flash drive cannot be played through an analog video connection (for example, composite, component, and scar t). Transfer the video content onto a suppor ted disc, or use an HDMI connection to play these files. DivX subtitles are not displayed correctly. • Make sure that the subtitle filename is the same as the video filename. • Make sure that the DivX video file and the subtitle file are saved under the same director y. • Select the character set that suppor ts the subtitle. (Refer to [Preference] > [DivX Subtitle]) EasyLink does not work. • Make sure that EasyLink feature is enabled on the TV. • Make sure the settings for [EasyLink] are correct. 24 EN Specifications English Note • Specifications are subject to change without notice. DVD region code Countries Russia Playable media • Disc • DVD, DVD-Video, VCD, SVCD, Audio CD • DVD+R /+RW, DVD-R /-RW, DVD+R /-R DL (Dual Layer), CD-R /-RW (Maximum number of files: 648) • File • Video: .avi, .divx, .mp4, .xvid • Audio: .mp3, .wma • Picture: .jpg, .jpeg • USB storage device • Compatibility: Hi-Speed USB (2.0) • Class suppor t: MSC (Mass Storage Class) • File system: FAT16, FAT32 • Maximum number of albums...