Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
[ CD Upsampling ] For better sound quality in stereo mode, convert the music CD to a higher sampling rate. • [ Off ] – turn off CD-upsampling. • [ 88.2kHz (X2) ] – convert to twice the original sampling rate. • [ 176.4kHz (X4) ] – convert to four times the original sampling rate. [ Night Mode ] You can play DVDs with Dolby Digital mode at a low volume, without disturbing others. High volume output is decreased and low volume output is increased to an audible level. • [ On ] – turn on night mode. • [ Off ] – enjoy surround sound with its full dynamic range. 32 EN English EN 33 Adjust settings Video setup 1 Press SETUP. .. [ General Setup Page ] menu is displayed. 2 Press B repeatedly to select [ Video Setup Page ]. 3 Select an option, then press OK. Video Setup Page Picture Setting TV Display TV Type Progressive HD JPEG HDMI Setup 4 Select a setting, then press OK. • To return to the previous menu, press b. • To exit the menu, press SETUP. Note • See the explanations of the above options in the following pages. [ TV Type ] If the video does not appear correctly, change the setting. By default, this setting matches the most common setting for TVs in your country. • [ PAL ] – for PAL-system TV. • [ Multi ] – for TV that is compatible with both PAL and NTSC. • [ NTSC ] – for NTSC-system TV. [ TV Display ] Select the screen format according to how you want the picture to appear on the TV. 4:3 Pan Scan (PS) 4:3 Letter Box (LB) 16:9 (Wide Screen) • [ 4:3 Pan Scan ] – for standard TV, a full-height screen display with the sides trimmed. • [ 4:3 Letter Box ] – for standard TV, a ‘wide-screen’ display with black bars on the top and bottom. • [ 16:9 ] – for wide-screen TV (frame ratio 16:9). [ Progressive ] If a progressive scan TV is not connected through HDMI cable, turn on progressive scan mode. • [ On ] – turn on progressive scan mode. • [ Off ] – disable progressive scan mode. Tip • There is more detailed description available. See chapter ‘Get Started - Turn on Progressive Scan’ for details. [ Picture Setting ] Select a predefined set of picture colour settings or customise the personal setting. • [ Standard ] – original colour setting. • [ Vivid ] – vibrant colour setting. • [ Cool ] – soft colour setting. • [ Personal ] – customise the colour setting. Set the level of brightness, contrast, sharpness and colour saturation, then press OK. [ HD JPEG ] Enjoy untouched and uncompressed JPEG pictures at it’s original resolution when you connect this DVD video player and the TV with a HDMI cable. • [ On ] – display high defi nition picture. • [ Off ] – display standard picture. Note • This DVD video player suppor ts the resolution display of 720p and above. [ HDMI Setup ] When you connect this DVD player and the TV with a HDMI cable, select the best HDMI setup that the TV can support. • [ Resolution ] – select a video resolution that is compatible with the TV display capability. Option Description [ Auto ] It detect and select the best supported video resolution automatically. [ 480p ], [ 576p ], Select a video [ 720p ], [ 1080i ], resolution that best [ 1080p ] supported by the TV. See the TVs manual for details. Note • If the setting is not compatible with the T V, a blank screen appears. Wait for 15 seconds for auto recover or switch to its default mode as follows: 1) Press Z to open the disc compar tment. 2) Press numeric button ‘1’. • [ Wide Screen Format ] – defi ne the wide screen format for disc play. Option Description [ Super Wide ] Centre position of the screen is stretched less than the side. This setting is only applicable if the video resolution is set to 720p or 1080i/p. [ 4:3 Pillar No stretching of the Box ] picture. Black bars are displayed on both sides of the screen. This setting is only applicable if the video resolution is set to 720p or 1080i/p. [ Off ] Picture will be displayed according to the format of the disc. Note • This setting is only available if you have set the [ TV Display ] setting to [ 16:9 ]. 34 EN • [ EasyLink ] – if this DVD player is connected to HDMI CEC compliant TV/devices, all connected devices can respond to the following commands simultaneously: Option Description [ Auto Wake When you press the Up TV ] STANDBY button, it turns on the TV and this DVD player, then video disc play starts (if a video disc is found in the disc compartment). • To disable this feature, select [ Off ]. [ System When you press and Standby ] hold the STANDBY button, all connected HDMI CEC devices switch to standby mode simultaneously. • To disable this feature, select [ Decline ]. Note • Philips does not guarantee 100% interoperability with all HDMI CEC compliant devices. • You must turn on the HDMI CEC operations on the TV/devices before you can enjoy the EasyLink controls. See the T Vs/devices manual for details. Preference 1 Press SETUP. • [ General Setup Page ] menu is displayed. 2 Press B repeatedly to select [ Preference Page ]. 3 Select an option, then press OK. Preference Page Audio Subtit...