Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Press SUB repeatedly until you have reached your desired subtitles option. TIP. The above two features depend on whether your disc contains any language or subtitle options. SETUP OPERATIONS SETUP OPERATIONS To maximize your playback experience, use SETUP to fine tune your settings. Use the 3, 4, 11, 22 keys to highlight your selection, and press 2;. 1 Press SETUP. A list of features is shown. 2 Use the 3 4 keys to highlight your selection. When the cursor highlights these settings, press 2; to: Language select language options Screen select screen options Photo select photo options Custom select custom options Exit exit the system menu 3 Press 11 to abort current settings or go back to previous menu level. 4 Press SETUP to exit. Language When the cursor highlights these settings, press 2; to: On Screen Display select on-screen display language Menu select disc menu language options Audio select disc audio language options Subtitle select disc subtitle language options Press 11 to abort current settings or go back to previous menu level. Note: Before using the 3,4 keys to select your desired angle mark, ensure the disc has been recorded with angle mark and you have enabled the angle mark option in the system menu. Screen When the cursor highlights these settings, press 2; to: Display Type select display ratio Brightness select brightness level Contrast select contrast level Press 5 to abort current settings or go back to previous menu level Photo When the cursor highlights these settings, press 2; to: Slide Show Frequency set the time between two photos Slide Show Effect select 17 slide show modes Display Format switch between Normal and Widescreen Photo Display switch between Slide Show and Browse Press 5 to abort current settings or go back to previous menu level Note: Parental options are only selectable when password mode is deactivated. Custom When the cursor highlights these settings, press 2; to: Parental Control select parental options DivXR VOD get DivX ID for VOD Password change existing password (3308 by default) Angle Mark select angle mark display options Default restore factory settings Press 5 to abort current settings or go back to previous menu level. English English TROUBLESHOOTING TROUBLESHOOTING If it appears that the DVD-Video player is faulty, first consult this checklist. It may be that something has been overlooked. WARNING Under no circumstances should you try to repair the set yourself as this will invalidate the guarantee. If a fault occurs, first check the points listed, before taking the set for repair. If you are unable to solve a problem by following these hints, consult your dealer or service centre. Symptom Remedy No power – Check if both plugs of the mains cord are properly connected. – Check if there is power at the AC outlet by plugging in another appliance. – Check if the built-in battery is drained. – Check if car adaptor is connected appropriately. Distorted picture – Check the disc for fingerprints and clean with a soft cloth, wiping from centre to edge. – Sometimes a small amount of picture distortion may appear. This is not a malfunction. Completely distorted – The PAL setting may be in the wrong picture / no colour in status. Match your TV’s setting with the TV screen the player’s setting. No sound – Check audio connections. If using a HiFi amplifier, try another sound source. Symptom Remedy Disc can’t be played – Ensure the disc label is upwards. – Clean the disc. – Check if the disc is defective by trying another disc. The player does not – Aim the remote control directly at the respond to the remote sensor on the front of the player. Avoid all control obstacles that may interfere with the signal path. Inspect or replace the batteries. Distorted or B/W – Use only discs formatted according to the picture with DVD TV-set used (PAL). Player does not respond – Operations are not permitted by the disc. to all operating commands – Refer to the instructions in the disc inlay. during playback Player feels warm – When the player is in use for a long period of time, the surface will be heated. This is normal. Display goes dimmer when – The unit is saving power to ensure longer AC is unplugged playtime with battery. It is normal. Adjust the brightness using the rotary bright ness control. This set complies with the radio interference requirements of the European Union. TECHNICAL DATA DISPOSAL OF YOUR OLD PRODUCT Dimensions 210 x 158 x 39.5 mm Weight 0.82 g Power supply INPUT: 100-240V 50/60Hz 0.3A OUTPUT: DC 9V 1A Power Consumption 9W Operating temperature range 0 - 45°C Laser wavelength 650nm Video system PAL Frequency response 20Hz ~ 20KHz ± 1dB Signal/noise ratio . 80dB Audio distortion + noise . -80(1KHz) Channel separation . 80dB Dynamic range . 80dB Audio out (analog audio) Output level: 2V ± 10% Load impedance: 10K. Video out Output level: 1Vp - p ± 20% Load impedance: 75. PHILIPS reserves the right to make design and specification changes for product improvement wit...