Stimmen - 2, Durchschnittliche Bewertung: 3 ( )

Hersteller: Toshiba Dateigröße: 1.98 mb Dateiname: Unterrichtssprache:

• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections. • If your television set has one audio input, connect the left and right audio outputs of the DVD player to a Y cable adapter (not supplied) and then connect to your TV. • Connect the DVD player directly to your TV. If you connect the DVD player to a VCR, TV/VCR combination or video selector, the playback picture may be distorted as DVDs are copy protected. • Analog audio out will not have sound if DTS playback is selected. Connecting to a TV (Using the component video jacks) Connections Interlaced outputs (ColorStream®) Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy higher quality picture playback. Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR) In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance. Progressive outputs (ColorStream Pro®) Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video signal. Connecting to these inputs allows you to view the highest quality pictures with less flicker. Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 480 progressive scan picture problems, it is recommended that the user switch the connection to the “standard definition” output. If there are questions regarding our TV set compatibility with this model 480p DVD player, please contact our Customer Service Center. To audio input To 2ch AUDIO OUT (R: red, L:white) YVIDEO PBPRHDMI OUT ANALOG COAXIAL DIGITAL RLVIDEO OUT AUDIO OUT To Y video input To P video input B To P video input R Audio cable (not supplied) Component video cable (not supplied) OPTICAL OUT S-VIDEO OUT 11 Connections Connections Setting the video output signal (interlaced / progressive) • Make the following setting. You can setting the video output signal for better picture quality. Press the SETUP button on the remote control and select the Video option, then set the Video out to P-Scan. See 32 . If your TV does not support the progressive scan format, the picture will appear scrambled or blank. To return to normal picture, turn off progressive scan (P-Scan) by setting the Video On-screen display Select: Page “Digital Output” “PCM” or “Bitstream” 33 “Video out” Component *P-Scan (Progressive) 32 out to Component mode. * Only for TV equipped with component video input Notes jacks which support the progressive scan. • Refer to the owner’s manual of the connected equipment as well. • When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. • If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD player away from the tuner and radio. • The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, high volume sound may damage your hearing as well as the speakers. • Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the speakers may be damaged. • Analog audio out will not have sound if DTS playback is selected. • ColorStream® and ColorStream Pro® are registered trademarks of Toshiba America Cousumer Products L.L.C. Connecting to a display (Using a HDMITM cable) HDMI Cable To HDMI Output YVIDEO PBPRHDMI OUT ANALOG COAXIAL DIGITAL RLVIDEO OUT AUDIO OUT (not supplied) OPTICAL OUT S-VIDEO OUT Available output signals are below: • Auto • 480p (progressive) • 720p (progressive) • 1080i (interlaced) • 1080p (progressive) • 1080p/24F (progressive) Setting the video quality (HDMI mode) The video quality is required to match your TV having HDMI feature and suitable quality. Please also check your TV owner’s manual. Set the video quality in HDMI Resolution menu (see change the output signals as below. If the appropriate video output signal is selected, the HDMI indicator will lights up. 32 ) to HDMI indicator Video output signal illuminates “ • 480p, • 720p, Auto • 1080i, • 1080p, • 24F ” illuminates “ • 480p ” 480p (progressive) illuminates “ • 720p ” 720p (progressive) illuminates “ • 1080i ” 1080i (interlaced) illuminates “ • 1080p ” 1080p (progressive) illuminates “ • 1080p, • 24F ” 1080p/24F (progressive) 480p, 720p, 1080i,1080p and 1080p/24F are signals created with this DVD Player from original 480i signal. The resolution of the picture may not be increased even if they are selected. 480p and 720p cannot be selected when the picture mode is sharp, color ...

Herunterladen

Geben Sie zwei Ziffern: