Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
. The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, high volume sound may damage your hearing as well as the speakers. . Turn off the amplifier before you connect or disconnect the DVD video player’s power cord, if you leave the amplifier power on, the speakers may be damaged. • Analog audio out will not have sound DTS playback. 19 Connections Connections Connecting to Optional Equipment You can enjoy high quality dynamic sounds by connecting the DVD video player. to optional audio equipment. . For connection to your TV, see “Connecting to a TV“. 18 19 . For details of output sound, see 42 . . This section uses the following reference marks.. :Front speaker :Rear speaker :Sub woofer :Center speaker :signal flow Notes: . DO NOT connect the BITSTREAM/PCM AUDIO OUT jack of the DVD video player to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V receiver is reserved for Laser disc use only and is incompatible with the BITSTREAM/PCM AUDIO OUT jack of the DVD video player. . Connect the BITSTREAM/PCM AUDIO OUT jack of the DVD video player to the "DIGITAL (COAXIAL)" input of a Receiver or Processor. . Refer to the owner’s manual of the connected equipment as well. . When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. . The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound. . Turn off the amplifier before you connect or disconnect the DVD video player’s power cord. If you leave the amplifier power on, the speakers may be damaged. Notice . When you are connecting (via the BITSTREAM/PCM AUDIO OUT jack) an AV decoder that does not have Dolby Digital, Digital Theater Systems (DTS) decoding function, be sure to set "Digital Output" to "PCM" from the on-screen displays. Otherwise, high volume sound may damage your hearing as well as the speakers. . When playing DTS-encoded discs (audio CDs), excessive noise may be output from the analog audio output jacks. To avoid possible damage to the audio system, you should take proper precautions when the analog audio output jacks of the DVD video player are connected to an amplification system.To enjoy DTS Digital SurroundTM playback, an external 5.1 channel DTS Digital SurroundTM decode system must be connected to the BITSTREAM/PCM AUDIO OUT jack of the DVD video player. 20 Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the DVD video player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark. Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights Reserved. . Use DVD video discs encoded via the Dolby Digital recording system. . Make the following setting. Connections To COAXIAL type digital audio out To BITSTREAM/ PCM AUDIO OUT On-screen display Select: Page "Digital Output" "Bitstream" 56 60 Recording system D 42 75. coaxial cable Amplifier equipped with a Dolby Digital decoder (Not supplied) Dolby Surround Pro Logic You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system(right and left front speakers, a center speaker, and one or two rear speakers). ¦ With an amplifier equipped with Dolby Digital connect the equipment the same way as described in "Connecting to an amplifier equipped with a Dolby Digital decoder." Refer to that amplifier’s owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound. ¦ With an amplifier not equipped with Dolby Digital connect the equipment as follows. . Make the following setting. On-screen display Select: Page “Bitstream” 56 or “Digital Output” 60 “PCM” * Connect one or two rear speakers. The output sound from the rear speakers will be monaural even if you connect two rear speakers.To audio input To ANALOG AUDIO OUT Audio cable Amplifier equipped with Dolby Surround Pro Logic (Not supplied) 21 Connections Connections Connecting to Optional Equipment Digital Theater System(DTS) DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs. If you have...
Dieses Handbuch ist für folgende Modelle:DVD-Player - SD-K741SU (3.29 mb)