Login:
Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Anleitung Toshiba, modell SD-4100KU2

Hersteller: Toshiba
Dateigröße: 5.78 mb
Dateiname:
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


.Designs and specifications are subject to change without notice. .This model may not be compatible with features and /or specifications that may be added in the future. 22 E n g l i s h WARNING Under no circumstances should you try to repair the DVD player yourself, as this will invalidate the warranty. Do not open the DVD player as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the DVD player for repair. If you are unable to remedy a problem by following these guides, consult your dealer or TOSHIBA for help. Troubleshooting Problem Solution No power No picture Distorted picture Picture clipped Completely distorted picture or black /white picture with DVD. No sound / distorted sound No audio at digital output No sound and picture Disc cannot be played Picture freezes momentarily during playback No return to start-up screen when disc is removed The player does not respond to the Remote Control Buttons do not work -Check if the AC power cord is properly connected. -Press the I/2ON/STANDBY on the front of the DVD player to turn on the power. -Refer to your TV' s manual for correct Video In channel selection. Change the TV channel until you see the DVD screen. -Check if the TV is switched on. -If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected accordingly. See pages 11-12 for proper progressive scan set up or deactivate the progressive scan feature as follow: 1) Press OPEN/CLOSE on the DVD Player. 2) When the disc tray is opened, press number button'1'on the remote control for a few seconds. -Sometimes a small amount of picture distortion may appear depending on the disc being played back. This is not malfunction. -May be caused by View Mode Setting (see page 17). Set to Original for normal viewing. -Connect DVD Player directly to the TV. -Make sure the disc is compatible with the DVD player. -Ensure that the DVD Player's setting is set to match that of the disc and your TV. -Adjust the volume. -Check that the speakers are connected correctly. -Check the digital connections. -Check if your receiver can decode MPEG-2 or DTS and if not, please make sure the digital output is set to PCM. -Check if the audio format of the selected audio language matches your receiver capabilities. -Check that the cable is connected to the correct device (See Connecting to television). -The DVD+R/RW must be finalized. -Ensure the disc label is facing up. -Check if the disc is defective by trying another disc. -Wrong region code. -Check the disc for fingerprint/scratches and clean with a soft cloth wiping from centre to edge. -Reset the unit by switching the player off, then on again. -Aim the Remote Control directly at the sensor on the front of the player. -Reduce the distance to the player. -Replace the batteries in Remote Control. -Re-insert the batteries with their polarities(+/- signs)as indicated. -To completely reset the player, unplug the AC cord from AC outlet for 5-10 seconds. 23 E n g l i s h Troubleshooting Problem Solution Player does not respond to some operating commands during playback. DVD Player cannot read CDs /DVDs Menu items cannot be selected Unable to select Progressive Scan on/off -Operations may not be permitted by the disc. Refer to the instructions of the disc jacket. -Use a commonly available cleaning CD/DVD to clean the lens before sending the DVD Player for repair. -Press STOP twice before selecting system setup menu. -Depending on the disc availability,some menu items cannot be selected. -Ensure that the output of the Video Out signal is switch to P-Scan/Component. 24 E n g l i s h Glossary Analog audio: An electrical signal that directly represents sound. In contrast, digital audio can also be an electrical signal, but is an indirect representation of sound. See also Digital audio. Aspect ratio: The width of a TV screen relative to it is height. Conventional TVs are 4:3 (i.e., the screen is almost square). Widescreen models are 16:9 (the screen is almost twice as wide as its height) Chapter: Just as a book is split up into several chapters, a title on a DVD disc is usually divided into chapters. See also Title. AUDIO OUT jacks: Jacks on the back of the DVD System that send audio to another system (TV, Stereo, etc.) Bite rate: The amount of data used to hold a given length of music; measured in kilobits per seconds, or kbps. Or, the speed at which you record.Generally, the higher the bite rate,or the higher the recording speed, the better the sound quality. However, higher bite rates use more space on a disc. Disc menu: A screen display prepared for allowing of selection of images, sound, subtitle,multi-angles etc. recorded on the DVD. Digital audio: An indirect representation of sound using numbers. During recording, the sound is measured at discrete intervals (44, 100 times a second for CD audio) by an analog-to -digital converter, generating a stream of number...

Dieses Handbuch ist für folgende Modelle:
DVD-Player - SD-4100KU2 (5.78 mb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien