Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Toshiba Dateigröße: 2.51 mb Dateiname: Unterrichtssprache:

S-video cable (Not supplied) To S-VIDEO OUT To COMPONENT VIDEO OUTTo AUDIO OUT (L/R)/ VIDEO OUT VIDEO OUTPUT SELECT switch Audio/Video cable (supplied) To video input To audio inputs Video cable (Y, Pb, Pr) (not supplied) To S-video input TV or monitor with audio/video inputs If the TV has an S-video input, connect the DVD player with the S-video cable. When using COMPONENT VIDEO OUT jack, set the VIDEO OUTPUT switch to COMPONENT or when using S-VIDEO OUT jack, set the VIDEO OUTPUT switch to S-VIDEO. Notes . Refer to the owner’s manual of your TV as well. . Before you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections. . Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, the playback picture will be distorted because DVD video discs are copy protected. Warning Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL OUT jack of this DVD player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers (Refer to “Selecting Digital Audio Output” on page 38). CONNECTIONS PAGE 13 You can listen to the sound of audio CDs and DVD video discs in stereo. Connecting to an Audio System To audio inputs Audio system To VIDEO OUT To AUDIO OUT (L/R) S-video cable (Not supplied) To S-VIDEO OUT To video input To S-video input TV or monitor with audio/video inputs Audio cable (supplied) Video cable (supplied) If the TV has an S-video input, connect the DVD player with the S-video cable. Notes . Refer to the owner’s manual of your audio system as well. . Before you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. . If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, move the DVD player away from the tuner and radio. . The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. . Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the speakers may be damaged. Warning Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL OUT jack of this DVD player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers (Refer to “Selecting Digital Audio Output” on page 38). PAGE 14 CONNECTIONS Connecting to Optional Audio System You can enjoy the high quality dynamic sound of Dolby Digital, Dolby Pro Logic, and 2 Channel Digital Stereo. Enjoying Dolby Digital Sound To DIGITAL OUT (COAXIAL or OPTICAL) 75 ohm coaxial cable or Optical cable To S-VIDEO OUT or VIDEO OUT Connection example Front speaker (left) Rear speaker (left surround) Rear speaker (right surround) Front speaker (right) Subwoofer To S-video Input or Video Input Center speaker To digital audio input Receiver equipped with a Dolby Digital decoder or Video cable S-Video cable Dolby Digital Dolby Digital is the surround sound technology used in theatres showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the DVD player to a 6 channel receiver equipped with a Dolby Digital decoder or Dolby Digital processor. To enjoy Dolby Digital sound from this DVD player you need the following: DVD recorded in Dolby Digital 6 channel receiver equipped with a Dolby Digital decoder, or Dolby Digital processor and power receiver 5 speakers and 1 sub woofer To enjoy Dolby Digital sound You need to select “Dolby Digital” from the SETUP menu. * Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved. Notes . Refer to the owner’s manual of your audio equipment as well. . Before you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. . The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. . Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the speakers may be damaged. CONNECTIONS PAGE 15 Connecting to Optional Audio System (Cont’d) Enjoying Dolby Pro Logic Surround Sound To AUDIO OUTTo VIDEO OUT Video cable Connection example R...

Herunterladen

Geben Sie zwei Ziffern: