Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
(Nothing is displayed while the Power Save Mode is ON.) • If the Disc and Tape indicator are blinking, either no disc or tape is loaded, or the loaded disc is not recordable. • The Recorder will record the audio according to the current TV tuner setting (Stereo, Mono or Bilingual). Use the AUDIO button to set the audio before switching the Recorder to Standby mode. • You must press POWER to stop the Timer Recording. • The Recorder will automatically power off when the Timer Recording ends. If the unit is DVD mode when the VCR timer recording ends, the unit will not automatically power off. • There is a short delay when a timer recording finishes to confirm the recorded program. If two timer recordings are set to record sequentially (one right after the other), the very beginning of the later program may not be recorded. • If you wish to watch the DVD playback during the VCR timer recording, press DVD (or DVD/VCR) to change to DVD mode and perform the DVD playback. You cannot playback the VCR during the DVD timer recording. DVD-R DVD+R DVD-RW DVD+RW Mitsubishi (8x, 16x) Mitsubishi (8x, 16x) Mitsubishi (4x) Mitsubishi (4x) That’s (8x, 16x) Ricoh (8x, 16x) Verbatim (4x) SONY (2.4x) SONY (16x) SONY (16x) JVC (4x) Ricoh (2.4x, 4x) --Victor (4x) Verbatim (2.4x) --Maxell (4x) - 40 Timer Recording (Continued) Checking Timer Recording Details Programming can be checked whenever the Recorder is turned on. Follow steps 1-3 as shown on page 40. • Use v / V to select a timer recording. • Press ENTER to edit the selected program. Timer Record menu appears. • Press CLEAR to delete the selected program from the Timer Record List. Canceling a Timer Recording You can clear a timer setting anytime before the recording actually starts. • Use v / V to select a program you want to erase on the Timer Recorder List. Press CLEAR and the confirm message will appear. Press ENTER while the [OK] is selected to erase the recording. Stopping a Timer Recording in Progress After a timer recording has started, you can still cancel the program. • Press POWER. Timer Recording Troubleshooting Even though the timer is set, the recorder will not record when: • There is no disc (or tape) loaded. • A non-recordable disc (or tape) is loaded. • Disc Protect is set to ON in the Setup menu (see page 27). • Power is turned on. • There are already 99 titles (DVD-RW, DVD-R) or 49 titles (DVD+RW, DVD+R) recorded on the disc. You cannot enter a timer program when: • A recording is already underway. • The time you’re trying to set has already passed. • There are already 16 timer programs set. If two or more timer programs overlap: • The earlier program takes priority. • When the earlier program finishes, the later program starts. • If two programs are set to start at exactly the same time, the program entered first takes priority. If the disc is damaged, the recording may not complete successfully. In this case even though the Check field shows “Rec. OK”, it may not be. RECORDING 41 Recording from an External Input Recording from External Components You can record from an external component, such as a camcorder or VCR, connected to any of the recorder’s external inputs. 1 11 Make sure that the component you want to record from is connected properly to the Recorder. See page 16. 2 22 Press AV/INPUT repeatedly to select the external input to record from. • Tuner: Built-in tuner • AV1: AV1 scart jack mounted on back panel • AV2: AV2 DECODER jack mounted on back panel • AV3: AV IN 3 (VIDEO, AUDIO (L/R)) mounted on front panel • DV: DV IN mounted on front panel ote Check that the Audio In settings DV Record Audio are as you want them. See page 25. 3 33 Load a recordable disc or tape. 4 44 Select the recording mode as necessary by pressing REC MODE repeatedly. DVD: XP(High Quality), SP (Standard Quality), LP (Low Quality), EP (Extended Quality), MLP (Maximum Long Play) VCR: SP (Standard Play), LP (Long Play) 5 55 Press REC (z) once. Recording will start. (The REC indicator lights in the display window.) • Recording continues until you press STOP (x) or the disc or tape is full. • To record for a fixed length of time, see Instant Timer Recording on page 38. 6 66 Press STOP (x) to stop recording. ote If your source is copy-protected using CopyGuard, you will not be able to record it using this recorder. See Copyright on page 8 for more details. Recording from a Digital Camcorder You can record from a digital camcorder connected to the DV IN jack on the front panel of this recorder. Using the recorder’s remote, you can control both the camcorder and this recorder. Before recording, make sure that the audio input for the DV IN jack is set up (see page 25). ips • The source signal must be DVC-SD format. • Some camcorders cannot be controlled using this recorder’s remote. • If you connect a second DVD Recorder using a DV cable, you cannot control the second DVD Recorder from this one. • You can’t control this unit remotely from a component connected to the DV IN jack. ...