Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
Max Mode: Setting reading speed to its maximum level provided by drive. . Silent Mode: Setting reading speed to a stable low speed. . Any mode set by Magic Speed will be reset to "Low nosie mode" when the PC restarts, so please check the current mode if you want to use “The maximum speed mode” and change the settings where necessary. Caution: A disc with crack may be crashed in playing with Max Mode. We recommend you to use such disc in Silent Mode, or make a copy immediately before use. How to Use MAGIC SPEED . First, install MAGIC SPEED program registered on our website. . On MAGIC SPEED tray icon, select right-click to execute the program. . Select the mode you want to use on Program Execution Window and select “settings”. Then, reading speed of the drive will run in selected mode. . Select “Close” to exit Program Execution Window. In this occasion, reading speed will be run in the set speed if there is no separate mode change or program exit. . We recommend you to use "Max Mode" for data copy or disc copy, and "Silent Mode" for normal operation. . Other functions . To disable Auto Run This is a default program that automatically runs in every PC booting. If you want to quit this auto run function, deselect the auto run item selected on tray icon menu. Where Can I Download MAGIC SPEED? Visit our website for customer support (URL:and select Firmware > MAGIC SPEED. Select Languages English Click [Start] - [Setting] - [Control Panel] - [Add/Remove Programs] and a window as shown below appears. [ Windows 2000 ] Click the [Add/Remove] button to remove the program. [ Windows XP ] Click the [Add/Remove] button to remove the program. Select Languages English Turn the PC off and pull out the drive. Remove any foreign objects from the surface of the drive using soft cloth. - Do not use benzene, paint thinner, or any other solvents. - Cleaning the interior of the unit with such things as a cotton swab may cause a failure or a loss of function. Select Languages English This part of the manual is to prevent damages or data loss. Read carefully and use the device properly. Do not place it under the direct sunlight. Place it so that it sits on its side on a flat surface. Do not scratch or place a label on the disc. Handle the disc with caution to prevent damage from an external shock. Do not expose it to severe temperature-fluctuations. (Exposure to such environment may cause congealing.) Select Languages English This part of the manual is to prevent damages or data loss. Read carefully and use the device properly. Do not touch the surface of the disc. Place your fingers on the edge of the disc to hold. Clean the disc lightly with soft cotton cloth, starting from the center and move to the edge of the disc. Use only disc-cleaning liquids. Do not use benzene, paint thinner, or any other solvents. If the disc surface becomes dirty with fingerprints, foreign substances or dust, the disc may not function properly. Select Languages English LED Meaning Disc Lead-In Green: Blinks every 0.3 seconds. Writing Green: Blinks every 0.3 seconds. Reading Green: Blinks every 0.3 seconds. Standby Off No Disc Off The indicator light turns off when the drive is not in use (standby) after disc lead-in. Select Languages English Problem Meaning / Solution The tray doesn't open. See if the PC is on. Make sure the power cable within the PC is connected properly. If the tray still won't open with the power-on, turn the power-off and insert a pin(paper clip) into the emergency hole to open. The tray doesn't close. Make sure the disc has been inserted properly. The PC is not working properly. See if the jumper(s) is properly connected to the Master/Slave Selection port. See if the drive is properly connected to the PC. See if the floppy disc remains in the PC. The drive is not working properly. See if the drive is connected properly to the PC. See if the device drive program has been installed properly. The system dosen't read the disc. See if the system detects the drive. Make sure you use the types of discs that are supported by the drive. See if the LED turns into green. Make sure you inserted the disc with the label facing up. Make sure you are using the right program for disc playback. See if the disc is clean. See if any congealing has occurred. Make sure the region code of the drive matches the disc number. You can confirm the use of software at the site of our customer support. Address: - See “ Support > Download center > Operation Manual ”. - See “ Information > Flash Manual > Recording Software ”. Select Languages English DVD Writers record data on the disc by applying laser light onto the surface of the disc, and therefore writing errors may occur if you use a damaged disc, for example. Be sure to eliminate the following error-causing elements before you start writing: * The following settings are recommended for all DVD Writer: Avoid a situation that requires multitasking, and remove t...
Dieses Handbuch ist für folgende Modelle:DVD-Player - SH-S222A (604.15 kb)
DVD-Player - TS-H662A (604.15 kb)