Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
1. With the unit in Stop mode, press the MENU button. 2. Select Setup using UP/DOWN buttons, then RIGHT or ENTER button. 3. Select Language Setup using UP/DOWN buttons, then press the RIGHT or ENTER button. 4. Select Disc Menu using UP/DOWN buttons, then press the RIGHT or ENTER button. 5. Use the UP/DOWN buttons to select ‘ English’ . - Select “ Others” if the language you want is not listed. e.g) Setting up in English. 6. Press the ENTER button. - English is selected and the screen returns to SETUP menu. 00410D-2/26/Page Setting Up the Language Using the Audio Language 1. With the unit in Stop mode, press the MENU button. 2. Select Setup using UP/DOWN buttons, then RIGHT or ENTER button. 3. Select Language Setup using UP/DOWN buttons, then press the RIGHT or ENTER button. 4. Select Audio using UP/DOWN buttons, then press the RIGHT or ENTER button. 5. Press the UP/DOWN buttons to select ‘ English’ . - Select “ Original” if you want the default soundtrack language to be the original language the disc is recorded in. - Select “ Others” if the language you want is not listed. AUDIO LANGUAGE Original Others Audio 6. Press the ENTER button. - English is selected and the screen returns to SETUP menu. Using the Subtitle Language 1. With the unit in Stop mode, press the MENU button. 2. Select Setup using UP/DOWN buttons, then RIGHT or ENTER button. 3. Select Language Setup using UP/DOWN buttons, then press the RIGHT or ENTER button. 4. Select Subtitle using UP/DOWN buttons, then press the RIGHT or ENTER button. 5. Use the UP/DOWN buttons to select ‘ English’ . - Select “ Automatic” if you want the subtitle language to be the same as the language selected as the audio preference. - Select “ Others” if the language you want is not listed. Some discs may not contain the language you select as your initial language; in that case the disc will use its original language setting. 6. Press the ENTER button. - English is selected and the screen returns to SETUP menu. Note NoteNote • If the selected language is not recorded on the disc, the original pre-recorded language is selected. • How to make the SETUP menu disappear or return to menu screen during set up; Press RETURN or LEFT button. Setting Up the Audio 1. With the unit in Stop mode, press the MENU 2. Select Setup using UP/DOWN buttons, then RIGHT or ENTER button. 3. Select Audio Setup using UP/DOWN buttons, then press the RIGHT or ENTER button. 4. Use the UP/DOWN buttons to select the desired item. Then press the RIGHT or ENTER button. AUDIO SETUP DTS : Off MPEG-2 Digital Out : PCM Dynamic Compression : On PCM Down Sampling : On Dolby Digital OutputDolby Digital Output : PCM: PCM Dolby Digital Output 1. PCM : Converts to PCM(2CH) 48kHz audio. Select PCM when using the Analog Audio Outputs. 2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH). Select Bitstream when using the Digital Audio Output. Note NoteNote• Be sure to select the correct Digital Output or no audio will be heard. Note NoteNote • When Multi Channel Output select Digital. Dolby & MPEG-2 Digital Out works. MPEG-2 Digital Out 1. PCM : Converts to PCM(2CH) audio. Select PCM when using the Analog Audio Outputs. 2. Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH or 7.1CH). Select Bitstream when using the Digital Audio Output. DTS 1. Off : Doesn’t output digital signal. 2. On : Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder. Dynamic Compression 1. On : To select dynamic compression. 2. Off : To select the standard range. PCM Down Sampling 1. On : Select this when the amplifier connected to the player is not 96KHz compatible. In this case, the 96KHz signals will be down converted to 48KHZ. 2. Off : Select this when the amplifier connected to the player is 96KHz compatible. In this case, all signals will be output without any changes. Note NoteNote • How to make the SETUP menu disappear or return to menu screen during set up; Press RETURN or LEFT button. • Manufactured under license from Dolby Laboratories. “ Dolby” and the double-D symbol are trademarks of Dolby Laboratories. • “ DTS” and “ DTS Digital Out” are trademarks of Digital Theater Systems, Inc. ENG-28 ENG-29 00410D-2/26/Page Setting Up the Display Setting Up the Display Setting Up the Parental Control 1. With the unit in Stop mode, press the MENU 2. Select Setup using UP/DOWN buttons, then RIGHT or ENTER button. 3. Select Display Setup using UP/DOWN buttons, then press the RIGHT or ENTER button. 4. Use the UP/DOWN buttons to select the desired item. Then press the RIGHT or ENTER button. TV Aspect Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio). 1. 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen. 2. 4:3 Pan Scan : Select this for conventional size TVs when you want to see the central portion...
Dieses Handbuch ist für folgende Modelle:DVD-Player - DVD-P148 (924.62 kb)