Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
B/W Black and White Setting the DVD-VCR Output Channel Your DVD-VCR output channel may need to be changed if the pictures suffer from interference or if your TV cannot find the pictures. Also, you can change the DVD-VCR output channel to adjust the frequency in which information is displayed on the screen. 1 After pressing the MENU, press the OK or .. Result: The Setup menu is displayed. 2 Press the corresponding ..,. buttons to select the Install option. 3 Press the OK or . to select this option. Result: The Install menu is displayed. Auto Setup Manual Setup TV System : K VCR Output CH : CH 36 Install CH:21 : CH:36 : CH:69 4 Press the ..or . buttons, until the VCR Output CH option is selected. 5 Select the required output channel (CH21~CH69) by pressing the OK or . buttons . CH21 . .. CH36 . .. CH69 6 On completion, press RETURN to exit the menu. Then tune your television again (see page 10). Selecting the Colour Mode Before recording or playing back a cassette, you can select the required system standard. Otherwise, the system automatically selects the reception standard when you select AUTO. . When playing back a cassette, the standard is automatically selected by the DVD-VCR. When you playback an NTSC-recorded tape on this DVD-VCR make a setting on the colour system according to your TV. If your TV is a PAL system only TV, set NTPB. If your TV is Multi System TV (NTSC 4.43 compatible), set NT4.43 and you can record NT4.43. 1 After pressing the MENU, press the OK or .. Result: The Setup menu is displayed. 2 Press the corresponding ..,. buttons to select the User Set option. 3 Press the OK or . to select this option. Result: The User Set menu is displayed. (SV-DVD540/SV-DVD545) Colour System : Auto NICAM : On IPC : On ShowView Extend : Off User Set Colour System : Auto NICAM : On IPC : On User Set 4 Press the corresponding ..or ...buttons, until the Colour System option is selected. 5 Press the OK or . button to select Auto . PAL . MESECAM . B/W. Auto PAL MESECAM B/W Auto PAL MESECAM B/W 6 On completion, press RETURN three time to exit the menu. ENG-15 (SV-DVD440) (SV-DVD440) 5 To... Press OK or ., until... 6 Press the OK or . buttons to select the IPC (intelligent picture control) option. NICAM NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound. Please refer to page 23. 1 After pressing the MENU, press the OK or .. Result: The Setup menu is displayed. 2 Press the corresponding ..,. buttons to select the User Set option. 3 Press the OK or . to select this option. Result: The User Set menu is displayed. (SV-DVD540/SV-DVD545) Colour System : Auto NICAM : On IPC : On ShowView Extend : Off User Set Colour System : Auto NICAM : On IPC : On User Set (SV-DVD440) On Off On Off 4 Press the corresponding ..or . buttons, until the NICAM option is selected. Mono mode Off is displayed. Off: Only set at this position to record the standard mono sound during a NICAM broadcast if the stereo sound is distorted due to inferior reception conditions. Intelligent Picture Control The Intelligent Picture Control Feature allows you to adjust the sharpness of the image automatically, according to your own preferences. 1 During playback, press the MENU button on the remote control. Result: The Setup menu is displayed. 2 Press the OK or .. Result: The Setup menu is displayed. 3 Press the corresponding ..,. buttons to select the User Set option. 4 Press the OK or . buttons to select this option. Result: The User Set menu is displayed. (SV-DVD540/SV-DVD545) Colour System : Auto NICAM : On IPC : On ShowView Extend : Off User Set On Off Colour System : Auto NICAM : On IPC : On User Set On Off 5 Press the corresponding ..or. buttons, until the IPC option is selected. . When intelligent picture control mode is ON, the sharpness of the image is adjusted automatically. 7 To adjust the sharpness manually, press the . button to turn the IPC mode OFF. 8 Press the . or . buttons until the picture is NICAM mode On is displayed. displayed according to your preferences. On: Normally set at this . If you do not press a button within ten seconds, position. the PICTURE menu disappears automatically. 6 On completion, press RETURN three times to exit 9 On completion, press RETURN three times to exit the menu. the menu. ENG-16 ShowView Extend (SV-DVD540/SV-DVD545 Only) To prevent delays or over-runs the VCR has a function called ShowView EXTEND allowing you to extend the recording time by up to 60 minutes. . Only use if PDC is not available or set to Off. 1 After pressing the MENU, press the OK or .. 2 Press the corresponding ..,. buttons to select the User Set option. 3 Press the OK or . buttons to select this option. Result: The User Set menu is displayed. Colour System : Auto NICAM : On IPC : On ShowView Extend : Off User Set Off 10 20 30 40 50 60 4 Press the correspondi...