Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Fotos und technische Daten Sony DVP-PR30 |
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
C/X/x/c (12) Moves the highlight to select a displayed item. Centre button (ENTER) (12) Enters the selected item. E ./> (previous/next) (replay/step/step/ / adv / (scan/slow) N (play) X (pause) x (stop) FAST/SLOW PLAY See “Basic operations” (page 7) for the function of each button. Basic operations To Operation Play Press N. Stop Press x. Pause Press X. Go to the next chapter, track, or scene in continuous play mode Press >. Go back to the previous chapter, track, or scene in continuous play mode Press .. Scan backward/ forward Press m/ M . Press repeatedly to change the speed. Replay the previous scene*1*3 Press (replay) during playback. Briefly fast forward the current scene*2*3 Press (advance) during playback. Play backward*4/ forward*5 in slow motion Press X during playback, then press m/M repeatedly. Play backward*4/ forward*5 one frame at a time Press X during playback, then press / . Play in various speed with sound*6 Press FAST/SLOW PLAY repeatedly during playback. *1 For all DVDs except for DVD+RWs/DVD+Rs/ DVD+R DLs and DivX video files. *2 For DVDs and DivX video files only. *3 These functions may not work with some scenes. *4 For DVD VIDEOs and DVD-VR mode only. *5 For DVDs, VIDEO CDs and DivX video files only. *6 For DVDs, VIDEO CDs, Super VCDs and DVD-VR mode only. ,continued Top panel A Disc lid (14) D OPEN/CLOSE (14) B [/1 (on/standby) button/indicator (12) E x (stop) button (14) Lights up when the power is on. F N (play) button/indicator (14) C (remote sensor) (10) Lights up in playback mode. Rear panel DIGITAL OUT COAXIAL LINE(RGB)-TV L CENTER A DIGITAL OUT (COAXIAL) jack (10) B LINE (RGB) - TV jack (9) Hookups Hookups When unpacking, check the supplied accessories by referring to page 36. b • Plug cables securely to prevent unwanted noise. • Refer to the instructions supplied with the components to be connected. • Be sure to disconnect the mains lead of each component before connecting. Hookups Step 1: Connecting to Your TV Connect this player to your TV monitor, or projector using an audio/video (SCART) cable. This connection will use your TV speakers for sound. CD/DVD player TV l : Signal flow DIGITAL OUT COAXIAL LINE(RGB)-TV L CENTER INPUT to LINE (RGB)-TV SCART cable (not supplied) SCART input jack Be sure to make the connections firmly to avoid hum and noise. When using this connection, check that the TV conforms to S video or RGB signals. Refer to the operating instructions supplied with the TV to be connected. Also, when you set “LINE” to “S VIDEO” or “RGB” under “SCREEN SETUP” in the Setup Display (page 28), use a SCART cable that conforms to each signal. When connecting to a standard 4:3 screen TV Depending on the disc, the image may not fit your TV screen. To change the aspect ratio, see page 28. b • Do not connect a VCR, etc., between your TV and the player. If you pass the player signals via the VCR, you may not receive a clear image on the TV screen. • When you connect the player to your TV via the SCART jack, the TV’s input source is set to the player automatically when you start playback. In this case, press TV t (input select) on the remote to return the input to the TV. When you play a disc recorded in the NTSC colour system, the player outputs the video signal or the Setup Display etc. in the NTSC colour system and the picture may not appear on the PAL colour system televisions. In this case, open the disc lid and remove the disc. ,continued To connect to your audio component Use the following pattern. CD/DVD player to DIGITAL OUT (COAXIAL) Coaxial digital cable (not supplied) LINE(RGB)-TV L CENTER DIGITAL OUT COAXIAL DIGITAL OUT COAXIAL to coaxial digital input Audio component with a decoder : Signal flow z For correct speaker location, see the operating instructions supplied with the connected components. If your audio component has a Dolby*1 Digital, DTS*2, or MPEG audio decoder and a digital input jack, use this connection. You can enjoy Dolby Digital (5.1ch), DTS (5.1ch), and MPEG audio (5.1ch) surround effect. *1 Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. *2 Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 19962007 DTS, Inc. All Rights Reserved. b • After you have completed the connection, make the appropriate settings in Quick Setup (page 12). If your audio component has an MPEG audio decoder function, set “MPEG” to “MPEG” in “AUDIO SETUP” (page 31). Otherwise, no sound or a loud noise will come from your speakers. • The TVS effects of this player cannot be used with this connection. • In order to listen to DTS sound tracks, you must use this connection. DTS sound tracks are not output through the LINE (RGB)-TV (SCART) jack, even if you set “DTS” to “ON” in Quick Setup (page 12). Step 2: Connecting the Mains L...