Stimmen - 5, Durchschnittliche Bewertung: 3.8
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
The display for changing the password appears. 2 Follow Steps 2 and 3 to enter a new password. 54 zYou can turn off the Parental Control function just after inserting the DVD (Parental Control Temporarily Canceled) When you set a playback limitation level and insert the DVD, the PARENTAL CONTROL display appears. Enter the password to turn off the Parental Control function. When you stop playing the DVD, the level returns to the original level. zIf you have forgot your password Enter the 6 digits number “199703” in Step 2 to clear the current password. To enter a new password, follow the procedure from Step 2 again. Notes • When you play DVDs which do not have the Parental Control function, playback cannot be limited on this player. • When you do not set a password, you cannot change the settings for playback limitation. • Depending on the DVD, you may be asked to change the parental control level while playing the disc. In this case, enter the password, then change the level. When you stop playing the DVD, the level returns to the original level. Standard Code number Austria 2046 Belgium 2057 Canada 2079 China 2092 Denmark 2115 Finland 2165 France 2174 Germany 2109 Hong Kong 2219 Indonesia 2238 Italy 2254 Japan 2276 Malaysia 2363 Netherlands 2376 Norway 2379 Philippines 2424 Russian 2489 Singapore 2501 Spain 2149 Sweden 2499 Switzerland 2086 Taiwan 2543 Thailand 2528 United Kingdom 2184 Settings 55 Settings for Sound (AUDIO SETUP) Settings and Adjustments Select “AUDIO SETUP” after pressing SET UP. “AUDIO SETUP” allows you to set the sound according to the playback conditions. Default settings are underlined. AUDIO SETUP AUDIO ATT: AUDIO FILTER: AUDIO DRC: TRACK SELECTION: DOWNMIX: DIGITAL OUT: To set, press , then . To quit, press . OFF SHARP STANDARD OFF ON DOLBY SURROUND ENTER SETUP DOLBY DIGITAL: DTS: D-PCM OFF p AUDIO ATT (attenuation) Selects the setting of the output from the AUDIO OUT (1,2) and 5.1 OUTPUT connectors according to the audio equipment to be connected. • OFF: turns off the audio attenuation. • ON: reduces the audio output level so that no sound distortion occurs. Note The setting does not affect the output from the DIGITAL OUT OPTICAL and COAXIAL connectors. p AUDIO FILTER Selects the type of digital filter to reduce the noise of a frequency higher than 22.05kHz (fs 44.1kHz), 24kHz (fs 48kHz) or 48kHz (fs 96kHz). • SHARP: makes the sound clear and provides smooth sound reproduction. Normally set this position. • SLOW: makes the sound warm and deep. Note Depending on the disc, the effect on the sound may be difficult to hear. p AUDIO DRC (Dynamic Range Control) Makes the sound clear with the volume turned down at night, etc., when you play a DVD. This affects the output from the DIGITAL OUT connectors only when “PCM” in ”DIGITAL OUT” is set to “ON,” and it affects the output from the AUDIO OUT (1,2) and 5.1CH OUTPUT connectors. • STANDARD: Normally select this position. • TV MODE: makes the low sound clear even if you turned the volume down, so it is good for playing at night. It is especially recommended when you listen to the sound using the speakers of the TV. • WIDE RANGE: It gives you the feeling of being at a live performance. When you use high quality speakers, it is more effective. Notes • When you play DVDs without the AUDIO DRC function, there may be no effect on the sound. • When this item is set to “WIDE RANGE,” the sound volume from other than the 5.1CH OUTPUT connectors may be less than usual. • “WIDE RANGE” cannot be selected when you have selected “NONE” in “SIZE” under “SPEAKER SETUP.” p TRACK SELECTION Gives the sound track which contains the highest number of the channels priority when you play a DVD on which multiple audio formats are recorded. If multiple audio channels are recorded in PCM, DTS, MPEG AUDIO or Dolby Digital format, the higher-numbered channel audio recorded in PCM, DTS, MPEG AUDIO or Dolby Digital format is played. • OFF : No priority given. • AUTO : Priority given. Notes • When the player stores the settings in memory with the Playback Memory function, the player may not give priority even if you select “AUTO.” • When you set this item to “AUTO”, the language may change depending on the “AUDIO” settings in “LANGUAGE SETUP.” The “TRACK SELECTION“ setting has higher priority than that of “AUDIO” settings in “LANGUAGE SETUP” (page 50). • If you set “DTS” in “AUDIO SETUP” to “OFF”, the DTS sound track is not played even if you set this item to “AUTO” and the highest-numbered channel audio is recorded in DTS format. • If PCM, DTS, MPEG AUDIO and Dolby Digital sound tracks have the same number of the highest channels, the player selects PCM, DTS, Dolby Digital and MPEG AUDIO sound tracks, in this order. • Depending on the DVD, the audio with priority may be predetermined. In this case, you cannot give priority to the DTS, MPEG AUDIO or Dolby Digital format by selecting “AUTO.” 56 pDOWNMIX* Switches the mixing down methods when you play a DVD on which the s...