Stimmen - 4, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Sony Dateigröße: 7.19 mb Dateiname: 2672838122.pdf Unterrichtssprache:

Video Outputs video signals. S Video Outputs S-video signals. Colour System Selects the colour system when playing VIDEO CDs (including Super VIDEO CDs). PAL Plays a disc in PAL colour system. NTSC Plays a disc in NTSC colour system. Auto Display On Automatically displays information on the screen when the recorder is turned on, etc. Off Displays information only when DISPLAY is pressed. Screen Saver The screen saver image appears when you do not use the recorder for more than 10 minutes while an on-screen display, such as the System Menu, is displayed on your TV screen. The screen saver image helps prevent your display device from becoming damaged (ghosting). On Turns on the screen saver function. Off Turns off the function. Settings and Adjustments Pause Mode (HDD/DVDs only) Selects the picture quality in pause mode. Auto The picture, including subjects that move dynamically, is output with no jitter. Normally select this position. Frame The picture, including subjects that do not move dynamically, is output in high resolution. Audio Settings (Audio) The “Audio” setup allows you to adjust the sound according to the playback and connection conditions. 1 Press SYSTEM MENU while the recorder is in stop mode. 2 Select “SETUP,” and press ENTER. 3 Select “Audio,” and press ENTER. The “Audio” setup appears with the following options. The default settings are underlined. Audio ATT (attenuation) If the playback sound is distorted, set this item to “On.” The recorder reduces the audio output level. This function affects the output of the following jacks: – LINE 2 OUT R-AUDIO-L jacks – LINE 1 – TV jack – LINE 3/DECODER jack Audio Connection The following setup items switch the method of outputting audio signals when you connect a component such as an amplifier (receiver) with a digital input jack. For connection details, see “Step 3: Connecting the Audio Cords” on page 19. Select “Dolby Digital,” “MPEG,” “DTS,” and “48kHz/96kHz PCM” after setting “Digital Out” to “On.” If you connect a component that does not accept the selected audio signal, a loud noise (or no sound) will come out from the speakers, and may affect your ears or cause speaker damage. 1 Select “Audio Connection” in “Audio,” and press ENTER. 2 Select “Digital Out,” and press ENTER. On Normally select this position. Off The influence of the digital circuit upon the analogue circuit is minimal. 3 Select “On,” and press ENTER. On Select this when the playback sound from the speakers is distorted. 4 Set the digital output signal. • Dolby Digital (HDD/DVDs only) Selects the type of Dolby Digital signal. Off Normally select this position. D-PCM Select this when the recorder is connected to an audio component lacking a built-in Dolby Digital decoder. The surround effects of output signals are determined by the “Downmix” setting item in the “Audio” setup. Dolby Digital Select this when the recorder is connected to an audio component with a built-in Dolby Digital decoder. • MPEG (DVD VIDEOs only) Selects the type of MPEG audio signal. PCM Select this when the recorder is connected to an audio component without a built-in MPEG decoder. If you play MPEG audio sound tracks, the recorder outputs stereo signals via the DIGITAL OUT (COAXIAL) jack. MPEG Select this when the recorder is connected to an audio component with a built-in MPEG decoder. • DTS (DVD VIDEOs only) Selects whether or not to output DTS signals. On Select this when the recorder is connected to an audio component with a built-in DTS decoder. Off Select this when the recorder is connected to an audio component without a built-in DTS decoder. • 48kHz/96kHz PCM (DVD VIDEOs only) Selects the sampling frequency of the audio signal. 48kHz/ The audio signals of DVD 16bit VIDEOs are converted to 48 kHz/16 bit and output. 96kHz/ All signals containing 24bit 96 kHz/24 bit are output without conversion. However, the signals are output at 48 kHz/16 bit if copyright-protected signals are contained. b Note “48kHz/96kHz PCM” setting has no effect when audio signals are output from the LINE 2 OUT (RAUDIO- L) jacks or LINE 1 – TV/LINE 3/ DECODER jack. If the sampling frequency is 96kHz, signals are simply converted to analogue signals and output. Audio DRC (Dynamic Range Control) (DVDs only) Selects the dynamic range (difference between soft and loud sounds) setting when playing a DVD that conforms to Audio DRC. This affects the output from the following jacks: – LINE 2 OUT R-AUDIO-L jacks – LINE 1 – TV jack – LINE 3/DECODER jack – DIGITAL OUT (COAXIAL) jack only when “Dolby Digital” is set to “D-PCM” (page 100). Standard Normally select this position. TV Mode Makes low sounds clear even if you turn the volume down. Wide Range Gives you the feeling of being at a live performance. Downmix (DVDs only) Switches the method for mixing down to two channels when you play a DVD which has rear sound elements (channels) or is recorded in Dolby Digital format. For details on the rear signal components, see “4. Displaying the ...

Herunterladen

Geben Sie zwei Ziffern: