Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
5 Press Arrow (K/L) to select PARENTAL LEVEL, then press ENTER. 6 Press Arrow (K/L) to select the desired level. 7 Press SETUP to exit Notes .When doing this for the first time, enter any 4 digits. (except for 4737) That number will be used as the password from the second time onward. .To change the password, press Arrow (K/L) to select CHANGE, then press ENTER. Enter the four- digit pass-word, then press ENTER. .With some DVDs, it may be difficult to find if they are compatible with parental lock. Be sure to check if the parental lock function operates in the way that you have set. .Record the password in case you forget it. IF YOU FORGET THE PASSWORD 1 Press 4, 7, 3, 7 at step 4. .Password will be cleared and parental level will be set to ALL. 2 Proceed the above Steps 4-6 again. CONTROL LEVELS .ALL All parental lock is cancelled. .Level 8 DVD software of any grade (adult/general/children) can be played back. .Levels 7 to 2 Only DVD software intended for general use and children can be played back. .Level 1 Only DVD software intended for children can be played back, with those intended for adult and general use prohibited. DVD SETUP AUDIO SETTINGS Choose the appropriate Audio settings for your equipment as it only affect during the playback of DVD discs. 1 Press SETUP in STOP mode. 2 Press B to select CUSTOM, then press ENTER. .CUSTOM mode will appear. 3 Press Arrow (s / B) to select AUDIO, then press ENTER to confirm. AUDIO DRC OFF DOLBY DIGITAL BITSTREAM DOWN SAMPLING ON Dolby Digital: QUICK Set to BITSTREAM when the unit is connected to a Dolby Digital Decoder. (BITSTREAM: Output by Dolby Digital) (PCM: Convert the Dolby Digital to PCM) .The default setting is BITSTREAM. DOWN SAMPLING: .Set to ON when outputting in 48 kHz. .The default setting is ON. When playing disc with copyright Protection .If you select OFF, copyright protection will be activated and sound will be down sampled at 48kHz. 4 Press SETUP to exit. 4 Press Arrow (K/L) to select the below items, then press ENTER. DRC (Dynamic Range Control): .To compress the range of sound volume. .The default setting is OFF. .This function is effective only for the sound recorded by Dolby Digital recording. –30– EN 1L25 H9451UD(EN).qx33 03.1.22 7:22 PM Page 31 BLACK LEVEL SETTING DISPLAY SETTING DVD Adjust the Black Level Settings to make the black parts of the picture as bright as you preferred. 1 Press MODE during playback. ON 2 Press ENTER to switch ON/OFF. ON: Makes the dark parts brighter. OFF: Shows the original picture as recorded. 3 Press MODE twice or RETURN to exit. VIRTUAL SURROUND You can enjoy stereophonic visual space on your existing stereo system. 1 Press SURROUND during playback. OFF 2 Press SURROUND to set it 1 (Natural effect) or 2 (Emphasized effect) or OFF. 3 Press MODE or RETURN to exit. Note (for CD play only) .Virtual Surround will not be effective if the sound mode is set to something other than STEREO. DVD You can change certain aspects of the DVD display screens, on-screen messages and the display panel on the front of the DVD/VCR. 1 Press SETUP in STOP mode. 2 Press B to select CUSTOM, then press ENTER. .CUSTOM mode will appear. 3 Press Arrow (s / B) to select DISPLAY, then press ENTER to confirm. DISPLAY TV ASPECT 4:3 L- BOX ANGLE MARK ON AUTO POWER OFF ON LOGO ON 4 Press Arrow (K/L) to select the below items, then press ENTER. TV ASPECT: QUICK .Press Arrow (K/L) for an item selection, then press ENTER. .Select 4:3 LETTER BOX for a black bars appears on top and bottom of the screen. .Select 4:3 PAN - SCAN for a full height picture with both sides trimmed. .Select 16:9 WIDE if a wide-screen TV is connected to the DVD/VCR. .The default setting is 4:3 LETTER BOX. ANGLE MARK: .Press ENTER repeatedly to turn Angle mark ON or OFF. .The default setting is ON. AUTO POWER OFF: .Press ENTER repeatedly to turn Auto Power off ON or OFF. .The default setting is ON and it will turn the DVD/VCR to off automatically after 35 minutes of no use. LOGO: .Press ENTER to switch ON (opening picture)/ OFF(black). .The default setting is ON. 5 Press SETUP to exit. Notes .Be sure to press SETUP, or the setting will not work. English DVD CD MP3 –31– EN 1L25 H9451UD(EN).qx33 03.1.22 7:22 PM Page 33 TROUBLESHOOTING GUIDE If the DVD/VCR does not perform properly when operated as instructed in this Owner's Manual, check the DVD/VCR consulting the following checklist. V C R D V D V C R D V D PROBLEM CORRECTIVE ACTION No power. • Make sure the power plug is connected to an AC outlet. • Make sure the power is turned on. The DVD/VCR does not respond • Check if the power plug is connected to an AC outlet. to the remote control. • Check the batteries in the remote control. • Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles between the sensor and the remote. • You have to be within 23 feet of the DVD/VCR. • Check if the correct mode is selected. If not switch the mode by pressing DVD or VCR ,whichever you need, on the ...