Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Please push the ENTER key. Unit's display CHANNEL 15 DELETED 7 RQT6920 Setting up Preparation .Confirm that the antenna is connected correctly. .Turn on the television and select the appropriate video input to suit the connections to this unit. 1 Press [I, DVD POWER] to turn the unit on. 2 Press [3, 4] to select the menu language and press [ENTER]. e.g., when you select English 3 Press [ENTER]. Plug-in Auto Tuning starts and the unit puts the stations it can receive into channels. The unit then proceeds with Auto Clock Setting. The time is displayed when finished. If the clock is an hour slower or faster than the actual time, go to “Time Zone Adjust” to correct it (.page 49). 4 When the display shows the correct time Press [ENTER] to complete Plug-in Auto Tuning. If the unit couldn’t set the clock automatically Press [ENTER] to show the “Manual Clock Setting” screen. Set the time manually (.page 49). To start Plug-in Auto Tuning again (after relocation, for example) When the unit is on and stopped 1Press and hold [X, CH] and [W, CH] on the main unit for about five seconds. The unit turns off. 2Press [I, DVD POWER] to turn the unit on. Follow the above steps 2–4. 1 Press [SETUP] to show the menus. 2 Press [3, 4] to select “Channel” and press [1]. 3 Press [3, 4] to select “Antenna System” and press [ENTER]. 4 Press [3, 4] to select “TV” or “CATV” and press [ENTER]. The screen shown in step 2 reappears. 5 Press [3, 4] to select “Auto Channel Setting” and press [ENTER]. If you have not yet set clock, the “Auto Channel/Clock Setting” screen appears. 6 Press [ENTER]. Auto setting starts. This takes a few minutes. (To stop auto channel setting, press [RETURN].) When finished, the Complete screen or time display is shown. Press [ENTER]. To return to the previous screen Press [RETURN]. When you are finished Press [SETUP]. Add or delete channels if necessary channels are not set or unnecessary channels are set. While this unit is receiving the antenna signal (but not during recording): 1 Press the numbered buttons to select a channel. e.g., “5”: [0] . [5] “15”: [1] . [5] “115”: [100] . [1] . [5] .You can also use [W, X, CH] when you are going to delete a channel. 2 Press [ADD/DLT]. The channel is deleted if it was set or added if it was not set. e.g., Repeat steps 1 and 2 as necessary. Antenna system, channel caption, and VCR Plusr guide channel settings all revert to the default values when you perform the procedure below. Timer recording settings are also cleared. If Plug-in Auto Tuning fails English Espanol Francais Press ENTER Pulse ENTER Appuyer sur ENTER Select Language Seleccione la Lengua Selection de Langue RETURN ENTER Auto Channel/Clock Setting Connect antenna cable and if you use a cable box, tune it to your local PBS CH then. . . Please push the ENTER key. TAB SELECT Antenna System Auto Channel Setting Channel Caption Preset Channel Caption Manual Channel Caption VCR Plusi CH Setting CATV Channel SETUP RETURN Set Up Disc Video Audio Display TV...
Dieses Handbuch ist für folgende Modelle:DVD-Player - DMR-E50 (2.75 mb)