Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
. The disc is dirty. Clean it. . The disc may be badly scratched. . You inserted a blank DVD-RAM or DVD-R. . Condensation has formed: Wait 1 to 2 hours for it to evaporate. 17 8 9 — — — A title or chapter doesn’t play when it is selected. . Some titles and chapters on DVD- Video are not played when you have changed the ratings level. 51 Picture distorted during search. . Some distortion is normal. — Alternative soundtrack and subtitles cannot be selected. . The languages are not recorded on the disc. . You may have to use the disc’s menus to select languages. — 17 No subtitles. . Subtitles are not recorded on the disc. . Turn the subtitles on. — 42 Angle cannot be changed. . This function depends on software availability. Angles can only be changed during scenes where different angles are recorded. — You have forgotten your ratings password. . Return the ratings setting to “8”. While the disc tray is open, press and hold [ : / 6] and [ 5/ 9] on the main unit at the same time for 5 or more seconds. — Displays Reference The display is dim. . Go to Display in the SETUP menus and change the display’s brightness with “FL Display”. 53 “12:00” is flashing on the unit’s display. . The clock is not set. Go to Set Up in the SETUP menus and set the clock with “Clock Settings”. 54 The displayed recording time and actual recording time differ. . Displayed recording time is calculated based on the number of frames recorded per second. This number is subject to minute variation. When the recording time is long the cumulative effect of these small differences may result in the slight variation you may sometimes find between displayed recording time and actual recording time. This is normal. — Remote control The remote control doesn’t work. . [DVD, TV] is not switched to “DVD”. Switch to “DVD” when operating this unit. . The remote control and main unit are using different codes. Change the code on the remote control or main unit. . The batteries are depleted. Replace them with new ones. . Point the remote control at the remote control sensor on the main unit. . Remove obstacles from between the remote control and main unit. 6 50 9 9 — Cannot operate the television. . Change manufacturer code. Some televisions cannot be operated even if you change the code. . [DVD, TV] is not switched to “TV”. Switch to “TV” when selecting the receiving channel for the television. 15 6 61 RQT6559 Troubleshooting guide Possible solutions are with “ !? ” on the relative pages in these instructions. Recording and timer recording Page Cannot record. . You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the unit can record onto. . The disc is unformatted. Format the disc so this unit can record on it. . The disc is protected with the write-protect tab. Use a ballpoint pen or similar to release the write protection. . The disc is protected with DISC SETTING. Release the disc protection. . The disc is full or nearly full. Erase unneeded programs or use another disc. 8 34 19 34 36 VCR Plusr programming does not work properly. . The guide channels are incorrect. Go to Channel in the SETUP menus and correct them with “VCR Plusi CH Setting”. . The clock is wrong. Go to Set Up in the SETUP menus and correct it with “Clock Settings”. 13 54 Timer recording does not work properly. . The timer program is incorrect. Correct the program. . The unit is not on timer recording standby. (“ A” on the unit’s display is not on.) Press [ I, DVD POWER] to turn “ A” on. . Different timer program times overlap. . The clock is wrong. Go to Set Up in the SETUP menus and correct it with “Clock Settings”. 32 — — 54 The unit switches to standby while making a timer recording. . The disc has run out of space. Use a disc that has enough space to record the program. — The timer program remains even after recording finishes. . The program remains if you select “DAILY” or “WEEKLY”. . The program remains if recording failed for some reason, but is cleared automatically at 4 a.m. two days later. 31 — Timer recording does not stop even when [ . ] is pressed. . Press [ . ] and then [ENTER] within 5 seconds to turn “ A” off. Recording stops. — The available recording time doesn’t increase even after erasing recordings on the disc. . As this unit is unable to erase data written to DVD-RAM with a computer, the available recording time does not increase. The data will be erased if you reformat the disc. . If the disc is dirty, wipe with the DVD-RAM/PD disc cleaner (optional) before formatting. 34 9 Reference Discs make sounds as they rotate. This does not indicate a malfunction. Product Service 1. Damage requiring service—The unit should be serviced by qualified service personnel if: (a)The AC power supply cord or AC adaptor has been damaged; or (b)Objects or liquids have gotten into the unit; or (c)The unit has been exposed to rain; or (d)The unit does not operate normally or exhibits a marked change in performance; or (e)The unit has been dropped ...