Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: JVC Dateigröße: 3.63 mb Dateiname: Unterrichtssprache:

Press ENTER and “CABLE BOX CONTROL IS ON” appears on the screen for about 5 seconds, then the screen in step 5 appears. If the cable box’s channel does not change to 9; A Press weto select “NO”, then press ENTER. B Repeat steps 8 – 9 until the cable box’s channel changes to 9 by entering another code. PRESS [SET UP] TO EXIT ENTER SELECTEXIT SET UP SELECT WITH [ ] THEN PRESS [ENTER] INITIAL SET UP > CABLE BOX SET N OYES DID YOUR CABLE BOX CHANGE TO CHANNEL 09? C If the channel does not change after going through all the code numbers listed for your model of cable box, then try all the other numbers. 8 For DBS receiver If the DBS receiver’s channel changes to the channel listed below for your brand, setting is complete. Press ENTER and “DBS RECEIVER CONTROL IS ON” appears on the screen for about 5 seconds, then press ENTER. The screen in step 5 appears. PRESS [SET UP] TO EXIT ENTER SELECTEXIT SET UP SELECT WITH [ ] THEN PRESS [ENTER] INITIAL SET UP > DBS RECEIVER SET N OYES DID YOUR DBS BOX CHANGE TO CHANNEL 100? JVC ] 100 SONY ] 205 ECHOSTAR ] 100 RCA ] 205 If the DBS receiver’s channel does not change as shown above; A Press weto select “NO”, then press ENTER. B Repeat steps 8 – 9. NOTES: . The Controller may not work with all types of cable box or DBS receiver. . If your cable box does not respond to any code between 1 and 28, you cannot use the Controller to change cable box channels. In this case, make sure to leave the cable box turned on and tuned to the proper channel before the scheduled start time of timer recording. Contact your cable company about the possibility of exchanging your current cable box with the one compatible with your unit. . If your DBS receiver does not respond to the code, you cannot use the Controller to change satellite channels. In this case, make sure to leave the DBS receiver turned on and tuned to the proper channel before the scheduled start time of timer recording. . The unit can only change the cable box or satellite channel through the Controller during timer recording. . If your cable box and/or DBS receiver cannot be operated with a remote control (because it has no receiving window), you cannot use the Controller to change its channels. Make sure to leave the cable box and/or DBS receiver turned on and tuned to the proper channel before the scheduled start time of timer recording. . If the unit’s memory backup expires because of a power failure, set the cable box and/or DBS receiver output channels and brands again. . For customers in U.S.A.: If you are unable to set the Controller, contact JVC toll free at 1-800-252-5722. Page 25 Monday, 12 July 2004 14:10 Filename [DR-MH30UJ_04Name.fm] Masterpage:Left+ DR-MH30UJ_00.book Page 26 Monday, July 12, 2004 3:17 PM INITIAL SETTINGS 26 EN Monitor Set You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for wide-screen TVs. . Turn on the unit. . Turn on the TV and select the AV mode. . Slide the TV/CABLE/DBS/DVD switch to DVD. ENTER rtwe SET UP CABLE/DBS DVD TV 1 Press SET UP to access the Main Menu screen. . You cannot set the monitor type during recording or playback. 2 Press weto select “FUNCTION SET UP”, then press t. 3 Press we to select “VIDEO IN/ OUT”, then press t. 4 Press rt to select “MONITOR TYPE”, then press ENTER. 5 Press rtto select the desired option, then press ENTER. 6 Press SET UP to complete the setting. F-1 INPUT MONITOR TYPE VEDIO 4:3LB L-1 INPUT VEDIO L-2 INPUT VEDIO FUNCTION SET UP PRESS [SET UP] TO EXIT ENTER SELECTEXIT SET UP ] THEN PRESS [ENTER] DISPLAY SET RECORD/PLAY DVD VIDEO SET UP HDD/DVD SET UP SELECT WITH [ VIDEO IN/OUT INITIAL SET UP *The boldface settings below indicate the settings at your purchase. 8 MONITOR TYPE — 4:3LB / 4:3PS / 16:9 AUTO / 16:9 FIX 4:3LB (Letter Box conversion): Select this when the aspect ratio of your TV is 4:3 (conventional TV). While viewing a wide screen picture, the black bars appear on the top and the bottom of the screen. 4:3PS (Pan&Scan): Select this when the aspect ratio of your TV is 4:3 (conventional TV). While viewing a wide screen picture, the black bars do not appear; however, the left and right edges of the pictures will not be shown on the screen. 16:9 AUTO (Wide television conversion): Select this when the aspect ratio of your TV is 16:9 (wide TV). 16:9 FIX (Wide television conversion): Select this when the aspect ratio of your TV is fixed to 16:9 (wide TV). The unit automatically adjusts the screen width of the output signal correctly when playing back a picture whose aspect ratio is 4:3. Pan&Scan/Letter Box In general, DVD VIDEO disc are produced for a wide-screen TV with 16:9 aspect ratio. Material with this ratio will not fit to a TV with 4:3 aspect ratio. There are two styles to display the image, “Pan&Scan” (PS) and “Letter Box” (LB). Pan&Scan The right and left side of the image are cut off. The image fills the screen. . The picture will be shown in the “4:3LB” mode depending on the disc even if t...

Herunterladen

Geben Sie zwei Ziffern: