Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
12 Connection Amplifier Do not insert the power cord plugs of the player and the connected components have been connected. For details on the connection terminals of the AV amplifier, refer to its instruction manual. The video output from the player should be connected directly to the AV amplifier. If the video output is connected through a VCR, the picture displayed on the TV may be disturbed due to the copy protect function. To Connect an AV amplifier 6-Channel audio connection: When the connected AV amplifier has 6-channel audio input jacks, connect the 6CH. OUTPUT jacks of the player to them. ¦ When an amplifier which is not compatible with 6-channel inputs is connected, use the signals from the MIX LINE OUTPUT jacks of the player. The multi-channel surround audio will be down- mixed and output. e Audio connection: Connect the MIX LINE OUTPUT jacks of the player to the audio input jacks of the AV amplifier using the provided audio cables. Digital audio connection: Connect the OPTICAL DIGITAL OUTPUT connector of the player to the digital audio input connector of the AV amplifier. ¦ Do not bend or bundle the optical fiber cable. Be sure to attach the protection caps on the optical connectors when they are not used. ¦ It is also possible to perform using a commercially available coaxial cable and the COAXIAL DIGITAL OUTPUT jack. In the coaxial digital connection, be sure audio cable, not an ordinary audio cable. Video connection: Connect the VIDEO OUTPUT jack of the player to the video input jack of the AV amplifier using the provided video cable. S Video connection: When the connected TV has an S Video connector, connect the S VIDEO OUTPUT connector of the player to it using the provided S Video cable. ¦ As S Video separates video signal into the luminance signal (Y) and color signal (C), it can provide sharper pictures than ordinary video connection. To Set Up of the Player Setup of Menu screen: The language to be used in the menus of the player can be selected. "Player Menu Language" Setting Y Setups Related to TV: The following setups can be made according to the TV connected to the player. "TV Aspect" Setting ) "TV Mode" Setting ) "TV Monitor Type" Setting A Chapter 1: Setup for digital audio If the connected AV amplifier does not contain of Dolby Digital, DTS and MPEG decoder, be sure to set the " Digital Audio" settings after connecting the player to it. For the nonexistent decoders, set the " Digital Audio" setting to " PCM". If the player is played without changing the initial " Bitstream" setting, extremely loud noise will be produced and may damage the speakers. "Digital Audio PCM Down Conversion" Setting ¤ "Digital Audio Dolby Digital" Setting ¤ "Digital Audio DTS" Setting ¦ "Digital Audio MPEG" Setting . Setup for 6-channel audio connection: When the audio is connected using the 6CH. OUTPUT jacks of the player, set the player as follows. "Speaker Setting" . Audio output from DVD AUDIO When the " D.MIX" (down-mix) indicator is not lit, the MIX LINE OUTPUT, DIGITAL OUTPUT and PHONES output jacks output the front (L/R) channel signals instead of the down-mixed 2-channel signals. The 6CH. OUTPUT jacks output the same number of channels as the original number of channels recorded in the DVD AUDIO disc, regardless of the speaker setting. When the " P. PCM" indicator is lit, the 6CH. OUTPUT jacks output the same number of channels as the original number of channels regardless of whether the " D.MIX" indicator is lit or not. Connections 13 Chapter 2: Setups This chapter describes the according to the connected Most of the operations below can be performed using provided joystick remote control unit. For the operations, also refer to the separate " Settings Preparation of Remote Control Unit Installing the batteries: Open the cover and insert the batteries (R6/AA) by observing the polarity marking. \ \ 2 1 Remote control range: 6m 30° 30° @ If the joystick remote is used outside this area, correct operations will not be possible. ¦ When the controllable distance of the joystick remote reduces, replace both batteries with new ones. Turning Power on When the power plug of the player is inserted in a wall outlet and the POWER button is pressed, the " STANDBY" indicator lights up to indicate that the power of the player is in standby mode. 1. Turn on the connected components and set the amplifier for the DVD player input. POWER 2. Press on the joystick remote to turn the player main unit on. ¦ When the " STANDBY" indicator is lit, the power of the player main unit cannot be turned on by pressing the POWER button on the main unit. (To turn the power of the player main unit on it, press the 3 button.) 3. The player's tray starts rotation to detect if any disc is inserted, and the display shows " MECHA INIT" (Mechanism Initialization). 4. When no disc is inserted, the display shows " NO DISC" and the player enters stop mode. ¦ If there is any disc inserted in the tray at the moment the power is turned ON, pla...
Dieses Handbuch ist für folgende Modelle:DVD-Player - DV-4070 (849.99 kb)
DVD-Player - DVF-R9030 (849.99 kb)
DVD-Player - DV-4900 (849.99 kb)