Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
CH START END DATE RETURN SPEED vVbB02 07 10PM 09 10PM 12/05 Auto CLEAR 8 8 To enter another setting, repeat steps 1 to 7. 9 9 Press O RETURN to exit the menu. The timer indicator appears in the display window and the VCR stands by for recording. When using a cable box, leave it on. Recording TV programs using the VCR Plus+® system (SLV-D550P only) To stop recording To stop the VCR while recording, press x STOP. To use the DVD-VCR after setting the timer To use the DVD-VCR before a timer recording begins, just press ?/1. The timer indicator disappears from the display window and the DVD-VCR switches on. Remember to press ?/1 to reset the VCR to the timer recording standby mode after using the VCR. You can also do the following tasks while the VCR is recording: • Reset the counter (page 43). • Display tape information on the TV screen (page 45). • Check the timer settings (page 58). • Watch another TV program (page 46). Tip • To check, change or cancel the program setting, see “Checking/changing/canceling timer settings” on page 58. Notes • If the VCR does not accept the PlusCode number, this means that: – The PlusCode number is incorrect. – Once, Mo~Fr, or Weekly was selected incorrectly. You cannot select MO~FR or Weekly for a program that airs more than seven days ahead. Correctly set the PlusCode number again from step 2. • When the PlusCode number is incorrect, “Invalid code” will appear in the display. Basic Operations Recording TV programs using the VCR Plus+® system (SLV-D550P only) Checking/changing/canceling timer settings Before you start… • Check that the DVD-VCR clock is set to the correct time. • Turn on the DVD-VCR and your TV. • Switch the input selector on your TV so that the signal from the player appears on the TV screen. •Set TV / DVD·VIDEO to DVD·VIDEO, then press SELECT VIDEO to control the VCR (page 10). • When using a decoder, turn it on. • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • If the DVD player is in play mode, you cannot display the setup menu. Stop the DVD playback. CLEAR SET UP TIMER V/v/B/b ENTER O RETURN 1 1 Press SET UP, then press V/v to select (PROGRAM) and press ENTER. You can also display the timer programming menu by pressing TIMER. The timer programming menu appears. CH START END DATE RETURN SPEED vV bB 01 05 31PM 07 31PM 1/20 Auto SP 03 01 31AM 03 32 1/21AM 06 06 32 08 32PM PM 1/21 EP 2 2 Press V/v to select setting you want to change or cancel. • To change the setting, press B/b to select the item you want to change, and press V/v to change it. • To cancel the setting, press CLEAR. Checking/changing/canceling timer settings CH START END DATE RETURN SPEED vV bB 01 05 31PM 07 31PM 1/20 Auto SP 03 01 31AM 03 32 1/21AM 06 06 32 08 32PM PM 1/21 EP CLEAR Press O RETURN to confirm the setting. Press O RETURN again to exit the menu. When the timer settings overlap The program that starts first has priority and the second program starts recording only after the first program has finished. If the programs start at the same time, the program listed first in the menu has priority. Program 1 about 20 seconds Program 2 will be cut off Program 1 Program 2 about 20 seconds will be cut off Basic Operations Checking/changing/canceling timer settings Locking the DVD-VCR (Child Lock) After you have set the timer, you can lock all of the buttons on the DVD-VCR so that the settings are not canceled by mistake. ?/1 POWER x To lock the DVD-VCR When the DVD-VCR is turned on, hold down ?/1 POWER on the unit until “LOCK” appears in the display window. The DVD-VCR turns off and the indicator remains lit if there is a timer setting. The DVD-VCR will not work except for timer recordings. To unlock the VCR Hold down ?/1 POWER on the unit until “LOCK” disappears from the display window. The DVD-VCR is unlocked and turns on. To stop timer recording while the DVD-VCR is locked, press x. The recording stops and the DVD-VCR is unlocked. Note • The DVD-VCR will be unlocked when: – You stop timer recording by pressing x. – You insert a tape. – The AC power cord is disconnected or power supply stops. Locking the DVD-VCR (Child Lock) Advanced Hookups A/V Receiver hookup A Use this hookup if your A/V receiver has a Dolby* Surround (Pro Logic) decoder and 3 to 6 speakers You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-channel audio (Dolby Digital) discs. . Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double- D symbol are trademarks of Dolby Laboratories. DVD-VCR Advanced Hookups l: Signal flow Stereo audio cord (not supplied) (red) (white) (white) (red) to LINE OUT L/R (AUDIO) to audio input [Speakers] [Speakers] Amplifier (receiver) with Dolby Surround decoder Rear (L) Rear (R) Front (L) Front (R) Subwoofer Center Rear (mono) Note • When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear speakers and a subwoofer. continued A/V Recei...
Dieses Handbuch ist für folgende Modelle:DVD-Player - D350P (1.91 mb)