Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
18) PLAY/PAUSE button Press to start playback. Press again to pause playback. 19) GOTO button Press to select the desired disc starting time, track or title. 20) +10 button Select numbers greater than 9 by pressing the (+10) button first, and then additional number buttons as needed. 21) .. FWD SCAN button Press to search forward. 22) .. REV SCAN button Press to search backward. 23) SLOW button Press to activate slow forward or slow rewind. 24) ZOOM button Press to enter and cycle through zoom functions, use the direction buttons (4) to move around the screen. - 11 - SYSTEM CONNECTIONS NOTE: Before plugging the power cord into an AC outlet, make sure that all the connections have been made as described below. Power Supply Connection Connect the supplied adapter to the side of the DVD player in the jack marked “DC 12V In”. Plug the two-prong end of the power cord to an AC100-240V outlet. If you have difficulty inserting the plug, turn it over and reinsert it. If the DVD Player will not be used for a long time, disconnect the plug from the outlet. Connecting To a TV Audio/video connections Always ensure that the DVD player, TV and any other electrical equipment to be connected to the DVD player is switched OFF. The easiest way to connect the DVD player to a television is via the supplied Audio/Video cable. Connect the audio/video cable from the DVD player to the audio/video inputs of the TV. NOTE: This player only supports a NTSC input signals. Make sure to choose the NTSC input signal type. If the picture is distorted or colorless, please check if the type of the input signal. Remove the signal input and restart the player. - 12 - Connecting to a Normal Amplifier The DVD player can be connected to an amplifier. Please refer to the equipment’s manual before connecting. Also switch the AV/IN OUT switch to OUT. Connecting to a Digital Ready Amplifier The DVD Player can be connected to an amplifier with a digital optical input. The cable is not supplied, but can be purchased at most home electronics retailer. Also switch the AV/IN OUT switch to OUT. - 13 - PLAYBACK PREPARATIONS Usage of Remote Control Using Of Wireless Headphone 1) 2) Remove the empty battery receptacle. Refer to the drawing above. Insert the battery into the receptacle and insert the receptacle into the 1) For best results when using wireless headphone sit facing the screen, within the range of 12 feet and angles of 60 degrees. There should be no remote. obstacles between wire3) 4) For best results, aim the remote directly at the player’s receiving window within 15 feet, and angles of not exceeding 60 degrees. The path between the remote control and remote sensor should be free of obstructions. 2) 3) less headphones and infrared audio signal emitter. Set the IR to ON in the audio setup menu first. If there is no sound, make sure the batteries in the headphones are not discharged. 5) Under battery normal use the will last for one 6) year. Remove battery if the remote is not to be used for a long time or during storage. - 14 - DISC FORMATS SUPPORTED BY THIS PLAYER DISC LOGO DIAMETER PLAYBACK TIME/ PLAYABLE SIDES DVD 12cm 133 min (SS-SL) 242 min (SS-DL) 266 min (SS-SL) 484 min (SS-DL) 8cm 41 min (SS-SL) 75 min (SS-DL) 82 min (DS-SL) 150 min (DS-DL) CD 12cm 74 min 8cm 20 min MP3 12cm 600 min The disc maker specifies the operation of some DVD discs. Please refer to the instruction manual with the disc. Care of Discs Cleaning of Discs Do not touch the playing surface of If a disc has fingerprints or dust on the compact disc. it, lightly wipe the disc with soft Do not stick paper labels on the cloth from the center of the disc disc. outward in a circular manner. Never use record cleaning sprays, Storage of Discs or any other solvents to clean your Do not expose discs to direct discs. sunlight or excessive temperatures - 15 - Power Adapter The DVD player is supplied with a switching power adapter. 1) Connect AC adaptor in the jack the on side of the unit. 2) Plug the of the power cord to a grounded AC Outlet. NOTE: To prevent malfunction, turn the power to the DVD Player OFF before removing the power cord from the AC Outlet Pre-Operation 1) Connect DVD Player to power. 2) Press the “POWER” switch. 3) Handing the disc with its printed side toward you. (Referring to the above picture), push the disc in about . of the way. The disc will be pulled into the player from the rest of the way automatically. 4) Adjust the volume with the “VOLUME” adjust knob (also adjusts earphone volume if using headphones). Using Headphones Connect headphone into the headphone Jack on the left side of the unit. Quick Tips: Excessively loud volume could damage your hearing. Turn down the volume before you connect the headphones, and then raise the volume to comfortable level. Sound from the DVD Player’s external speaker will stop when headphones are connected. - 16 - POWER SUPPLY About Rechargeable Battery Pack Your portable DVD player comes with a lithium ion rechargeable batt...