Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
* For TDR-2209 there are only 9 camera Inputs and 9 Loop through outputs on the back board. For TDR-2204 there are only 4 camera Inputs and 4 Loop through outputs on the back board. 1. Camera Inputs 2. Loop Through output 3. Reserved 4. CCTV Monitor output 5. Alarm Inputs 6. Alarm Outputs 7. Audio In 8. Microphone Jack 9. Audio Out 10. COM series port 11. Printer (LPT) port 12. PC Monitor Output 13. Mouse (PS/2) 14. Keyboard (PS/2) 15. Network port (RJ-45) 16. AC Power Input 17. 115/230 VAC Power Switch (option) 18. Power Supply Switch (option) TATUNG TDR series Digital Recording System Page Step 1: Connect the Cables Connect all the necessary connector and signal cables into the correct ports. Audio In Audio Out Camera In Camera Out CCTV Monitor Out Alarm In/Out Protect Socket and LPT PC Monitor Output Network Port Power In * For TDR-2209 there are only 9 camera Inputs and 9 Loop through outputs on the back board. For TDR-2204 there are only 4 camera Inputs and 4 Loop through outputs on the back board. Step 2: Turn on the System Turn on the power by push the power button on the front panel. Reset Power Removable Storage CDRW TATUNG TDR series Digital Recording System Page CHAPTER 2: WATCH MODE Turn on the system. The main screen of TATUNG TDR-22XX series appears as below. Note: For TDR-2209 there are only 9 channels split the screen. For TDR-2204 there are only 4 channels split the screen Note: For TDR-2209, the Button of 9 Sequence and the button of 16 will show the all 9 channel at same time. : For TDR-2204, the Button of 4 Sequence, the button of 9 Sequence and the button of 16 will show the all 4 channel at same time. The buttons and icons on the screen are described below: 1. Company LOGO This is the logo of TATUNG Company of America. 2. DATE/TIME Window This window displays the date and time. 3. 1 Sequence Button Click to select the 1-window (1x1) format. Only 1 camera can be displayed at a time. The sequential dwell time can be adjusted in SETUP mode. 4. 4 Sequence Button Click to select the 4-window (2x2) format. Up to 4 cameras can be displayed at the same time. The sequential dwell time can be adjusted in SETUP mode. 5. 9 Sequence Button Click to select the 9-window (3x3) format. Up to 9 cameras can be displayed at the same time. The sequential dwell time can be adjusted in SETUP mode. 6. 16 Button Click to select the 16-window (4x4) format. Up to 16 cameras can be displayed at the same time. The sequential dwell time can be adjusted in SETUP mode. TATUNG TDR series Digital Recording System Page 7. Full SCR Button This button allows you to hide all buttons and icons and enlarge the display windows to the FULL SCREEN. You have to right click to get back to normal. Once you get the full screen, if you LEFT click, the screen can not go back to normal, instead, the picture the mouse arrow sitting on will be enlarged to full screen. 8. Motion Button Click to enable the motion tracking function. This is a very powerful function which allows you to track a moving object from one channel to another. All image windows this object passed by will be enlarged one by one. 9. Setup Button Click to switch to SETUP MODE. The setup mode includes buttons of CHANNEL, SCHEDULE, SPEED, COLOR, MOTION, P/T/Z PROTOCOL, PASSWORD, and VOICE. With these buttons your system can be custom- programmed to fit your operation needs. 10. Search Button Click to switch to SEARCH MODE. In this mode, you may either use LOG button to check the image database or use DATE/TIME button to get the recorded images within seconds. The images found may either print out or save to a floppy disk for your emergency needs. The usage of the storage can be found by STORAGE button. 11. Backup Button Click to switch to BACKUP MODE. In this mode, you may either choose auto-backup function to save images to a second removable hard disk or choose AVI backup function to save images onto a CDRW available from this system. 12. Control Button Click to switch to CONTROL MODE. In this mode the PAN/TILT/ZOOM of each camera can be controlled by clicking the buttons on the screen. 13. On/Off Button Click to turn off the entire system. 14. Display windows Display camera images on 1, 4, 9 or 16 windows depending on your selection. Left click a window will enlarge the picture in that specific window. And left click again the picture will go back to the normal size. RIGHT click any window will hide all buttons and icons and enlarge all pictures. And right click again will go back to normal 15. On Screen Display (OSD) Display the camera name and recording status. The recording status indicates camera active or inactive and the recording method (continuous recording, motion recording or alarm recording). TATUNG TDR series Digital Recording System Page 2.1 Channel display window 1. Channel (Camera) name 2. Image display window 3. Record status lamp 1. Channel (Camera) name Identify the name for each channel. Yo...