Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Toshiba Dateigröße: 5.25 mb Dateiname: DR430KU_OM.pdf Unterrichtssprache:

• To cancel the timer standby mode, press [I/yON/STANDBY]. • When the starting and the ending time are the same, “Exceeds 12 hours” appears and the program setting will not be accepted. • When the programmed starting and ending time are earlier than the current time, the setting will not be accepted. • If the starting time is earlier and the ending time is later than the current time, the recording will start right after [I/yON/STANDBY] is pressed. • “Press ON/STANDBY for timer recording” will appear on the TV screen 5 minutes before the programmed starting time. The Priority of Overlapped Settings Note for DVD recording • When the recording time of 2 programs are overlapped, or the end time of a program and the start time of another program is the same, the first 2 minutes (at the longest) of the subsequent program will be cut off. • If the cut-off portion comes up to 3 minutes or more, this program will be displayed with errors number E40 in the timer programming list. PROG. A PROG. B actual recording The first 2 minutes (at the longest) will be cut off. PROG. A PROG. B When the end time of the programming currently being recorded and the start time of the subsequent program are same: The beginning of the PROG. B may be cut off. ................................................................................................................ .................................................................................... 42 EN SATELLITE LINK You can set the unit to start recording whenever it detects the video signal from the external tuner. Preparing for the satellite link timer recording: Preparation on the tuner • The external tuner should be equipped with some kind of timer function. Using timer function of the tuner, set it to output audio/video signals when it comes to the time you want to start recording, and stop output audio/ video signals when it comes to the time you want to finish recording. Refer to the tuner’s manual on how to set the timer. • Make sure to set the satellite link standby mode when you finish setting. Preparation on this unit • You must let the unit know which video input jack you are using before making a recording. Refer to “SETTINGS FOR THE VIDEO INPUT” on page 26. 1Select the desired recording mode. (Refer to “Recording Mode” on page 33.) 2Press [SATELLITE LINK]. In a second, the unit will be turned into the standby mode automatically as it goes into the satellite link standby mode. To cancel the satellite link function while in the satellite link standby mode: Press [SATELLITE LINK] or [I/yON/STANDBY]. To cancel the satellite link function while the satellite link recording is in progress: Press [STOP C]. SE-R0265 OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC GHI PQRS TUV SPACE SETUP DISPLAY AUDIO TOP MENU CLEAR RETURN MENU/LIST WXYZ JKL MNO DEF ENTER SKIP REV PLAY REPEAT REC MODE REC ZOOM PAUSE TIME SLIP 1.3x / 0.8x PLAY INSTANT SKIP STOP FWD SKIP TIMER PROG. SATELLITE LINK Note • If the signal of external input breaks up over 5 seconds, recording will stop until the signal of external input comes back again. • You cannot set the start or the end time for the satellite link timer recording on this unit. • Recording picture will be distorted if the copy protection signal is being detected during satellite link timer recording. • You can record the satellite link by using S-video input jacks on the rear panel. Refer to page 43 for more information. • When a regular timer recording and the satellite link timer recording are overlapped, those recordings are recorded as illustrated below. example 2 actual recording timer recording satellite link example 3 actual recording timer recording satellite link The first 2 minutes (at the longest) will be cut off. example 1 timer recording actual recording satellite link The first 2 minutes (at the longest) will be cut off. ................................................................................................................ .................................................................................... EN 43 Disc Introduction Connections Basic Setup Management Recording Playback Editing Function Setup Others SETTINGS FOR AN EXTERNAL DEVICE or Supplied cables used in this connection are as follows: • RCA audio cable (L/R) x 1 • RCA video cable x 1 Please purchase the rest of the necessary cables at your local store. Connect the external device properly to the unit by using input jacks either L2 (Front) or L1 (Rear). When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front). Use the RCA audio/video cables for this connection. When connecting a DVC (digital video camcorder), use the DV IN jack on the front panel instead of VIDEO IN jack. Connection to an External Device IN PR/CR OUT L R VIDEO IN AUDIO IN (L1) S-VIDEO HDMI OUT COMPONENT VIDEO OUT DIGITAL AUDIO OUTPUT PCM / BITSTREAM COAXIAL IN L R VIDEO VIDEO AUDIO IN S-VIDEO (L1) IN OUT AUDIO OUT R L VIDEO OUT S-VIDEO OUT VIDEO L R DV I...

Herunterladen

Geben Sie zwei Ziffern: