Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Samsung Dateigröße: 12.72 mb Dateiname: Unterrichtssprache:

(DVD) Press to display the subtitle language name 24 MARK/SEARCH button abbreviation on screen. Press to memorize scenes for replay. (DVD) 12 TV/VCR button Press to switch between TV Displays the VCR Function and VCR mode. menu. (VCR) 13 MODE button 25 ANGLE/TIMER button Use to select the program Use to access various or random play. camera angles on a disc (DVD). Displays the Timer Allows you to repeat play a Program menu (VCR). title, chapter, track, or disc. (DVD) REPEAT button ENG-12 Chapter 2 Chapter 2 CONNECTIONS Connecting the Antenna Cable There are several ways to connect your DVD-VCR. Select one of the following antenna connections that best suits you below. ¦ Method 1: Antenna + DVD-VCR + TV: No Cable box ¦ Method 2: Antenna +Cable box + DVD-VCR + TV: Cable box with many scrambled channels ¦ Method 3: Antenna + DVD-VCR + Cable box +TV: Cable box with a few scrambled channels - If you are using an off-air antenna that has 300-ohm twin flat leads, use an external antenna connector (300-75 ohm adaptor: not supplied) to connect the antenna to the DVD-VCR. - If you have two separate antennas (one VHF and the other UHF), use a UHF/VHF combiner-adaptor (available at most electronics shops) to connect the antenna to the DVD-VCR. - The RF OUT(TO TV) jack of this product sends signals received through the antenna and also outputs Audio/Video signals. Method1: Antenna + DVD-VCR + TV: No Cable box You can record non-scrambled channels by selecting the channel on the DVD-VCR. Also use this Method if you watch channels without cable box. To RF IN To RF OUT Antenna cable To Antenna Input ENG-13 CONNECTIONS Method2: Antenna + DVD-VCR + TV: Cable box with many scrambled channels You can record channels by selecting the channel on the cable box. You cannot record one channel while watching another channel. Be sure that the cable box is turned on. To RF IN Cable Box Wall To RF OUT Antenna cable To Antenna Input Method3: Antenna + DVD-VCR + TV: Cable box with a few scrambled channels Wall You can record non-scrambled channels by selecting the channel on the cable box. You cannot record scrambled channels that require a cable box. To RF IN To RF OUT Cable Box Antenna cable To Antenna Input ENG-14 CONNECTIONS Before Connecting the DVD-VCR -Always turn off the DVD-VCR, TV, and other components before you connect or disconnect any cables. -Refer to the user’s manual of the additional components (such as a TV) you are connecting for more information on those particular components. Connection to a TV The following shows examples of connections commonly used to connect the DVD-VCR with a TV and other components. Connection to a TV (Video) 1 Using video/audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT terminals on the rear of the DVD-VCR to the VIDEO (yellow)/AUDIO (red and white) IN terminals of your TV. 2 Turn on the DVD-VCR and TV. 3 Press the input selector on your TV remote control until the Video signal from the DVD-VCR appears on the TV screen. White White Yellow Red Audio Cable Video Cable Red Yellow Notes -Noise may be generated if the audio cable is placed too close to the power cable. -If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 19 to 20). -The number and position of terminals may vary depending on your TV set. Please refer to the user's manual of your TV. -If there is one audio input terminal on the TV, connect it to the LINE OUT AUDIO OUT Left (white) terminal of the DVD-VCR. -If you press the P.SCAN button when DVD-VCR is in stop mode or no disc is inserted, the Alt Video Out mode changes in the following sequence: (S-Video - Interlace - Progressive) ENG-15 CONNECTIONS Connection to a TV (S-Video) - Connecting to your TV using an S-Video cable. -You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and color(C) signals to present clearer images than regular video input mode. (Audio signals are delivered through the audio out or line out audio). 1 Using an S-Video cable (not included), connect the S-VIDEO OUT terminal on the rear of the DVD-VCR to the S-VIDEO IN terminal of your TV. 2 Using the audio cables, connect from the AUDIO OUT or LINE OUT AUDIO (red and white) terminals on the rear of the DVD-VCR to the AUDIO (red and white) IN terminals of your TV. Turn on the DVD-VCR and TV. White Red 3 S-Video Cable (not included) Audio Cable With the unit in stop mode, set the Alt video output to S-Video in the Display Setup menu (see Red White pages 61 ~ 62) or press the PROGRESSIVE button on the remote control until S-Video is output. 4 Press the input selector on your TV remote control until the S-Video signal from the DVDVCR appears on your TV screen. Notes -If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 19 to 20) -The number and position of terminals may vary depending on the TV set. Please refer to the user's manual of your TV. -The S-Video jack ...

Herunterladen

Geben Sie zwei Ziffern: