Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
41 Note: • Depending on your TV, the picture may appear dis- torted if the brightness is set too high. If this happens, lower the brightness. 1 Press Setup and select “Video Adjust” from the on-screen display. 2 Make settings using the / / / (cursor) buttons, and Enter. You can adjust the following picture quality settings: • Sharpness – Adjusts the sharpness of edges in the picture (Fine, Stan- dard, Soft). • Brightness – Adjusts the overall brightness (–20 to +20). • Contrast – Adjusts the contrast between light and dark (–16 to +16). • Gamma – Adjusts the “warmth” of the picture (High, Medium, Low, Off). • Hue – Adjusts the red/green balance (Green 9 to Red 9). • Chroma Level – Adjusts how satu- rated colors appear (–9 to +9). • BNR – Switches on/off block noise reduction (On, Off (default)). Adjust the Brightness, Contrast, Hue and Chroma Level settings using the / (cursor left/right) buttons. 3 Press Enter to save your settings and exit the Video Adjust screen. Setup Video Adjust Enter Sharpness Brightness Contrast Gamma Hue Chroma Level BNR Standard 0 0 Off 0 0 Off Video Adjust Brightness min max 0 Enter Initial Settings menu Using the Initial Settings menu The Initial Settings menu provides audio and video output settings, parental lock settings, and display settings, among others. If an option is grayed out it means that it cannot be changed at the current time. This is usually because a disc is playing. Stop the disc, then change the setting. On Standby Open/ Close Play Mode Display 1 2 3 4 5 6 7 8 9 0 Clear Dimmer Top Menu Menu Return Setup Audio Angle Subtitle Zoom Stop Play Pause Down Up TV Control TV/Video Channel On/ Standby Volume RC-583DV Enter Enter Setup 1 Press Setup and select “Initial Set- tings”. 2 Use the cursor buttons and Enter to select the setting and option you want to set. All the settings and options are explained on the following pages. Setup Initial Settings Enter Notes: • In the table on next pages, the default setting is shown in bold: other settings are shown in italics. • The Digital Audio Out settings only need to be set if you have connected the digital output of this player to an AV receiver, or other equipment. • Check the operating instructions supplied with your other equipment to see which digital audio formats it’s compatible with. • Some settings, such as TV Screen, Audio Language and Subtitle Language may be overridden by the DVD disc. Often these settings can also be made from the DVD disc menu. Initial Settings menu—Continued Digital Audio Out settings Setting Option What it means Digital Out On Digital audio is output from the digital outputs. Note that there is no digital output when playing SACDs and some DVD-Audio discs regardless of this setting. Off No digital audio output. Dolby Digital Out Dolby Digital Dolby Digital encoded digital audio is output when playing a Dolby Digital DVD disc. Dolby Digital > PCM Dolby Digital audio is converted to PCM audio before being output. DTS Out DTS DTS encoded digital audio is output when playing a DTS disc. (Noise will be output if your amplifier/receiver is not compatible with DTS audio.) DTS > PCM DTS audio is converted to PCM audio before being output. Linear PCM Out Down Sample On 96kHz digital audio is converted to 48kHz for digital output. Note that High sampling rate DVD-Audio discs (192kHz or 176.4kHz) automatically output down-sampled audio through the digital outputs. Down Sample Off 96kHz digital audio is output as is at 96kHz. MPEG Out MPEG > PCM MPEG encoded digital audio is converted to PCM audio for digital output. MPEG MPEG encoded digital audio is output as is. Video Output settings Setting Option What it means TV Screen 4:3 (Letter Box) Set if you have a conventional 4:3 TV. Widescreen movies are shown with black bars top and bottom. (See also “Screen sizes and disc formats” on page 51.) 4:3 (Pan & Scan) Set if you have a conventional 4:3 TV. Widescreen movies are shown with the sides cropped so that the image fills the screen. 16:9 (Wide) Set if you have a widescreen TV. Component Out Progressive Set if your TV is compatible with progressive scan video (see your TV’s instruction manual for details). See also “Switching the video output to interlace using the front panel controls” on page 19. Note that progressive scan video is only output from the component video jacks. Interlace Set if your TV is not compatible with progressive scan video. Initial Settings menu—Continued Language settings Setting Option What it means English If there is an English soundtrack on the disc then it will be played. Audio Language*1 Languages as displayed If there is the language selected on the disc, then it will be played. Other Language Select to choose a language other than the ones displayed (see page 52). English If there is are English subtitles on the disc then they will be displayed. Subtitle Language*2 Languages as displayed If there is the subtitle language selected on the disc, then it will be displayed. O...
Dieses Handbuch ist für folgende Modelle:DVD-Player - DPS-6.5 (1.96 mb)
DVD-Player - DPS-6.5 (1.96 mb)