Stimmen - 3, Durchschnittliche Bewertung: 5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
The ANTENNA IN jack on the TV may be labelled TV IN,RF IN,75£2 (ohm), or ANT-IN. See yourTV owner’s manual for assistance. Plug in the power cords of the TV and the DVD/VCR. Set yourTV to channel 3 or 4. The DVD/VCR’s output channel is 3 when you purchase it. So, set yourTV to channel 3 when the DVD/VCR is new. If you cannot use channel 3 at yourTV, you can change the DVD/VCR’s output channel to channel 4.To do so, press the VCR button to put the DVD/VCR in VCR mode.The VCR light will be on the front of the DVD/VCR. Insert a videotape and press PLAY ► to start playback. During playback, press and hold the (VCR) PLAY ► button on the front of the DVD/VCR for three to five seconds. Each time you do this, the DVD/VCR’s output channel switches between 3 and 4, and the selected channel number appears on the display panel. Change yourTV to channel 3 or 4 accordingly. (You cannot change the DVD/VCR’s output channel while adjusting tracking manually. Press STOP ■ to stop play and cancel manual tracking, then press PLAY ► to resume playing and change the output channel.) There is not a channel 3/4 switch on the DVD/VCR (as customary with most VCRs). You are ready to turn on the DVD/VCR. Go to page 17 before turn- ing on the DVD/VCR. e H9620UD_1_47,qx4 04.4.7 11:57 AM Page 9 Hookups (cont’d) 9 DVD/VCR to Cable Box or Satellite Receiver and TV Using only basic RF coaxial cables This connection will let you use the features of both the VCR and the DVD Player. Connect a Cable TV or Satellite signal to the IN jack on the Cable Box/Satellite Receiver. Use an RF coaxial cable (as the one supplied) to connect the OUT jack on the Cable Box/Satellite Receiver to the ANT1N (Antenna In) jack on the DVD/VCR. ^ Use a second RF coaxial cable to connect the ANT-OUT (Antenna Out) jack on the DVD/VCR to the TV’s Antenna In jack. Remember... There are two ways to connect your Cable Box/Satellite Receiver to the DVD/VCR.With the connection on this page: * Select TV channels at the Cable Box/Satellite Receiver, not the DVD/VCR.To record or view TV channels, follow these steps: 1) Press VCR to put the DVD/VCR in VCR mode.TheVCR light will appear on the front of the DVD/VCR. 2) Press SKIPN/CH a or SKIP N/CH ▼ to set the DVD/VCR to the Cable Box/Satellite Receiver output channel (03 or 04). 3) Set the TV to the DVD/VCR’s output channel (03 or 04).The DVD/VCR’s output channel is channel 3 when the DVD/VCR is new.To change it from 3 to 4, press and hold the (VCR) PLAY ► button on the DVD/VCR for 3-5 seconds during tape playback. For more details, see step 4 on page 8. 4) Select the channel you want to view/record at the Cable Box/Satellite Receiver. * You may not view a channel other than the one you are recording. * You can only program a timer recording for one channel at a time. Set your Cable Box/Satellite Receiver to the channel you want to record. When you enter the channel you want to record in a timer recording, select channel 03 or 04 (the Cable Box/Satellite Receiver output channel). (This is step 8 on page 37.) Leave the Cable Box/Satellite Receiver on for a timer recording. Helpful Hint If your Cable Box or Satellite Receiver has Audio and Video Out jacks, use audio and video cables to connect them to the VCR AUDIO IN and VIDEO IN jacks on the rear of the DVDIVCR.You will not need the RF coaxial cable connection between the Cable Box/Satellite Receiver and the DVD/VCR as described at step 2. e H9620UD_1_47,qx4 04.4.7 11:57 AM Page 10 e 10 Hookups (cont’d) DVD/VCR to Cable Box or Satellite Receiver and TV Using only basic RF coaxial cables This connection will let you use the features of both the VCR and the DVD Player. Use an RF coaxial cable (as the one supplied) to con nect the ANT-OUT (Antenna Out) jack on the DVD/VCR to the IN jack on the Cable Box/Satellite Receiver. ^ Use a second RF coaxial cable to connect the OUT jack on the Cable Box/Satellite Receiver to the ^ ANTENNA IN jack on the TV. Remember... There are two ways to connect your Cable Box/Satellite Receiver to the DVD/VCR. With the connection on this page: * You may watch one channel while recording another. Follow these steps: 1) Put the Cable Box/Satellite Receiver on the same channel as the DVD/VCR’s output channel (03 or 04).The DVD/VCR’s output channel is channel 3 when the DVD/VCR is new.To alternate it between 3 and 4, press and hold the (VCR) PLAY ► button on the front of the DVD/VCR for 3-5 seconds during tape playback. For details, see step 4 on page eight. Set the TV to the Cable Box/Satellite Receiver output channel (03 or 04). 2) Press VCR to put the DVD/VCR in VCR mode.TheVCR light will appear on the front of the DVD/VCR. 3) Press VCR/TV on the remote to choose VCR position. 4) Press SKIPN/CH ▲ or SKIP W/CH ▼ to select the channel you want to record at the DVD/VCR. Press RECORD • to start the recording. 5) Press VCR/TV on the remote once to put the DVD/VCR in TV position. 6) Select the channel you want to watch ...
Dieses Handbuch ist für folgende Modelle:DVD-Player - DVP620VR/17B (3.18 mb)
DVD-Player - DVP620VR/07B (3.18 mb)
DVD-Player - DVP620VR/07 (3.18 mb)
DVD-Player - DVP620VR/00 (3.18 mb)