Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Philips, modell 7819901519

Hersteller: Philips
Dateigröße: 2.34 mb
Dateiname: dvdr3395_96_qsg_eng.pdf

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Please follow the step-by-step instructions to connect and set up your new DVD recorder. Please complete these recommended steps before using your recorder. For more advanced setups and operations, please refer to the User's Manual. If you encounter any problem setting up or operating this DVD recorder, please refer to the "Troubleshooting" section in the User's Manual before contacting technical support. Œ Unpack DVD Recorder Remote Control & AA Batteries (2) Power Cord (Not available on models that power cord is attached) Audio/Video Cable 1 RF Cable Connect Antenna Or Basic Cable Service 1 Connect Antenna or Cable service to RF-IN jack on the unit using RF cable (see picture below). 2 Connect DVD Recorder to your TV set using AV cable (see picture below). 3 If you have other AV sources you wish to connect to this DVD recorder, see panel A, B, C below for reference. 4 Attach power cord to the DVD recorder and then connect to the wall outlet (see picture on the right). 5 Press POWER key on the remote or front panel to turn on the DVD recorder. 6 Turn on your TV and switch to proper input. 7 Proceed with Step 3 © on the back page -iO- J RF Cable (not supplied) Antenna/ Cable Wall Outlet 1 DVD Recorder Q Ö ® ©' ®% nf (»I © r ANT/CABLE -v /- INPUT -, IN AUDIO VDEO 3-VIDEO i 0 \ ) RF Cable- (supplied) 1 Connect Cable Converter/Satellite Receiver to RF-IN jack on the unit using RF cable (see picture below). 2 Connect DVD Recorder to your TV set using AV cable (see picture below). If you need to use a setup box, cable converter or satellite receiver to receive TV signal, skip channel setup in STEP 3 on the next page. 3 If you have other AV sources you wish to connect to this DVD recorder, see panel A, B, C below for reference. 4 Attach power cord to the DVD recorder and then connect to the wall outlet (see picture on the right). 5 Press POWER key on the remote or front panel to turn on the DVD recorder. 6 Turn on your TV and switch to proper input. 7 Proceed with Step 3 © on the back page. T A Connect VCR as source Connect VCR to the DVD recorder using AV cable (see picture below). 2 Connect the power cords of both VCR and DVD recorder to the wall power outlet. Turn the VCR and the DVD recorder on. DVD Recorder B Connect Camcorder as source 1 Connect Camcorder to the DVD recorder using AV cable (see picture below). 2 If the DVD recorder is not connected to a TV set, return to the Connection Guide above to continue connecting the recorder to TV. DVD Recorder C Connect DV as source 1 Connect DV to the DVD recorder using DV cable (see picture below). 2 If the DVD recorder is not connected to a TV set, return to the Connection Guide above to continue connecting the recorder to TV. DVD Recorder DV Camcorder Camcorder User's Manual Quick Start Guide DV Cable (Not Supplied) DV OUT I -1 оиш-) © If there's any item missing, contact the store where this unit is purchased. © Note: For advanced connections, please refer to the “Connecting Up” section (p.6) in the User’s Manual. PHILIPS P/N 7819901519 User's Manual/ Quick Start Guide №J8!lR\r : 364X257mm ’ m№№iRA '■ 182x257mm(B5) M® Setup Experience Your New DVD Recorder 1 Press SETUP key on the remote to enter the Setup menu screen. 2 Use the ^ ▼ key on the remote to highlight “Language” and press OK key on the remote to select. 3 Use the ^ / ▼ key on the remote to highlight “OSD (On-Screen Display)” and press OK key to select. 4 Use the ^ / ▼ key on the remote to highlight your desired language and press OK key on the remote to select. 5 Press SETUP key to exit. TV Channel Setup 1 Press SETUP key on the remote to enter the Setup menu screen. 2 Use t...