Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
• Place the disc with the playback side down. • The disc is not placed within the guide. • Place the disc on the disc tray correctly inside the guide. • The disc is dirty. • Clean the disc. • The Movie Rating level is set. • Cancel the Movie Rating function or change the rating level. Picture from external input • The video signal from the external compo• You cannot connect via the DVD is distorted nent is copy-protected. Recorder+VCR. Connect the component directly to your TV. Some channels are • The skipped channels were deleted with the • Use the CH. Add/Del feature to restore chanskipped over when using CH. Add/Del feature. nels. See “Channel Add/Delete” on page 19. CH (v / V) Picture or sound of • Antenna or cables are loose. • Tighten connections or replace cable. broadcasting channel is • Wrong Tuning Band is selected in the DVD • Try all “Tuning Band” options; see page 18 for weak or missing. Recorder+VCR Setup menu. details. Camcorder image not • Camcorder is off. • Turn camcorder on and operate shown. properly. Camcorder image via A/V • DVD Recorder+VCR’s source is not set to • Use INPUT to select AV input channel (AV1, input or DV IN to DVD AV1, AV2, or DV IN. AV2, or DV IN). Recorder+VCR is not shown on TV screen. REFERENCE Can’t play disc recorded on this DVD Recorder+VCR on another DVD player. • The disc was recorded in Video mode. • Finalize the disc; see page 25. • Some players will not play even a finalized • No solution. disc recorded in Video mode. • The disc was recorded in VR mode and not • The other player must be RW compatible in finalized. order to play it. • Discs recorded with copy-once material can• No solution. not be played on other players. 61 Troubleshooting (Continued) Troubleshooting (Continued) Cause Solution Symptom • The remaining blank space on the disc is • Use another disc. record successfully. Cannot record or did not insufficient. • The source you are trying to record is copy• You cannot record the source. protected. • When setting the recording channel, the • Select the channel on the DVD channel is tuned on the TV’s own tuner. Recorder+VCR’s built-in TV tuner. • When recording to a Video mode disc, pro• Use a VR mode formatted disc for copy-once grams that are copy-once protected cannot material. be recorded. Timer Recording not possi • Clock in DVD Recorder+VCR is not set to • Set clock to correct time. See “Clock (Auto)” ble. correct time. or “Clock (Manual)” on page 19. • Timer has been programmed • Reprogram Timer. See “Timer Recording” on incorrectly. page 43. • TIMER indicator light does not appear after • Reprogram Timer. programming timer. Stereo Audio Record • TV is not Stereo-compatible. • No solution. and/or Playback not pres • Broadcast program is not in stereo format. • No solution. ent. • DVD Recorder+VCR A/V Out jacks are not • Make A/V connections. Stereo is available connected to TV A/V In jacks. only via A/V output from DVD Recorder+VCR. • DVD Recorder+VCR Audio/Video Out is not • Select AUX or A/V source as TV input. selected for viewing at the TV. • DVD Recorder+VCR’s TV audio channel is • Set TV audio channel mode to Stereo. See set to SAP or MONO. “Changing TV Audio Channels” on page 27. • The remote control is not pointed at the • Point the remote control at the remote sensor remote sensor of the DVD Recorder+VCR. of the DVD Recorder+VCR. • The remote control is too far from the DVD • Operate the remote control within 23 ft (7 m). Recorder+VCR. Remote control does not work properly. • There is an obstacle in the path of the • Remove the obstacle. remote control and the DVD Recorder+VCR. • The batteries in the remote control are • Replace the batteries with new ones. exhausted. Moisture Condensation Moisture condensation can occur: • When the DVD Recorder+VCR is moved from a cold place to a warm place. • Under extremely humid conditions. In locations where moisture condensation may occur: • Keep the DVD Recorder+VCR plugged into an AC power outlet with POWER On. This will help prevent condensation. • When condensation has occurred, wait a few hours for the DVD Recorder+VCR to dry before using it. Reset the DVD Recorder+VCR If you observe any of the following symptoms... • The unit is plugged in, but the power will not turn on or off. • The front panel display is not working. • The DVD Recorder+VCR is not operating normally. ...you can reset the DVD Recorder+VCR as follows: • Press and hold the POWER button for at least five seconds. This will force the unit to power off. Press the POWER button again to turn the unit back on. • Unplug the power cord, wait at least five seconds, and then plug it in again. 62 Technical Specifications General Power requirements AC 120V, 60 Hz Power consumption 35W Dimensions (approx.) 430 X 78.5 X 354 mm (16.9 x 3.1 x 13.9 inches) (w x h x d) Mass (approx.) 5.6 kg (12.3 lbs) Operating temperature 5°C to 35°C (41°F to 95°F) Operating humidity 5 % to 90 % Signal system NTSC Recording Recording format DVD Video Recor...