Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
U Clear button This button is used to cancel various functions. V Menu button (25) This button is used to select the menu. W Enter button This button is used to start playback of the selected title chapter, or track and to confirm settings. X [], [], [], [] buttons These buttons are used to navigate DVD-Video menus and the onscreen setup menus. Y Setup button (40) This button is used to open and close the onscreen setup menus. Z Subtitle button (36) This button is used to select subtitles. a Play [ ] button (23) This button is used to start playback. b Pause [ ] button (23) This button is used to pause playback. c Stop [ ] button (23) This button is used to stop playback. d Up [ ] button (26, 29) This button is used to select the next chapter or track. e Down [ ] button (26, 29) This button is used to select the previous chapter or track. During playback it selects the beginning of the current chapter or track. f Step/Slow [+] & [–] buttons (30) These buttons are used with the Frame-by-Frame Playback and Slow Motion Playback functions. g Dimmer button (30) This button is used to adjust the display brightness. h Progressive button (36) This button is used to turn on and off the Progressive Scanning function. Progressive scanning can’t be turned on or off during playback. 14 Before Using the DPC-7.4 Installing the Remote Controller’s Using the Remote Controller Batteries To use the remote controller, point it at the DPC-7.4’s remote 1 Open the battery compartment, as shown. 2 Insert the two supplied batteries (AA/R6) in accordance with the polarity diagram inside the battery compartment. 3 Close the battery compartment. control sensor, as shown below. ChainModeLast Memory Dimmer Repeat Display Standby/On Standby PlayStop Pause Disc Skip Open /Close Enter DPC-7.4 30° 30° Remote control sensor Approx.16 ft. (5 m) DPC-7.4 Notes: • The remote controller may not work reliably if the DPC7.4 is subjected to bright light, such as direct sunlight or inverter-type fluorescent lights. Keep this in mind when installing the DPC-7.4. • If another remote controller of the same type is used in the Notes: • The supplied batteries should last for about six months, although this will vary with usage. • If the remote controller doesn’t work reliably, try replacing both batteries. • Don’t mix new and old batteries, or different types of batteries. • If you intend not to use the remote controller for a long time, remove the batteries to prevent possible leakage and corrosion. • Flat batteries should be removed as soon as possible to prevent possible leakage and corrosion. same room, or the DPC-7.4 is installed close to equipment that uses infrared rays, the remote controller may not work reliably. • Don’t put anything, such as a book, on the remote controller, because the buttons may be pressed inadvertently, thereby draining the batteries. • The remote controller may not work reliably if the DPC7.4 is installed in a rack behind colored glass doors. Keep this in mind when installing the DPC-7.4. • The remote controller will not work if there’s an obstacle between it and the DPC-7.4’s remote control sensor. 15 Connecting the DPC-7.4 This chapter explains how to connect the DPC-7.4 to your other AV components. Before Making Any Connections • Read the manuals supplied with your AV components. • Don’t connect the power cord until you’ve completed all audio and video connections. Optical Digital Inputs The DPC-7.4’s optical digital connector has a dust cap for keeping out dust and dirt when it’s not in use. Remove the cap before inserting an optical digital plug. Push the plug in all the way to make a good connection. Keep the dust cap in a safe place for future use. AV Cables & Connectors RCA/phono AV Connection Color Coding RCA/phono AV connections are usually color coded: red, white, and yellow. Use red plugs to connect right-channel audio inputs and outputs (typically labeled “R”). Use white plugs to connect left-channel audio inputs and outputs (typically labeled “L”). And use yellow plugs to connect composite video inputs and outputs. Analog audio Right (red) Left (white) (Yellow) Right (red) Left (white) (Yellow) Composite video • Push each plug in all the way to make a good connection (loose connections can cause noise or malfunctions). •To prevent interference, keep audio and video cables away from power cords and speaker cables. Wrong! Right! Video Component video Component video separates the luminance (Y) and color difference signals (PR, PB), providing the best picture quality. (Some TV manufacturers label their component video inputs slightly differently.) The DPC-7.4 has RCA/phono and BNC component video outputs. S-Video S-Video provides better picture quality than composite video. Composite video Composite video can be found on virtually all TVs, VCRs, and other video equipment. Use only dedicated composite video cables. CR CB Y CR CB PR PB P/ / // R PB Y COMPONENT 1 PBY PR CR CB Y CR CB PR PB P/ / // R PB Y COMPONENT 2...
Dieses Handbuch ist für folgende Modelle:DVD-Player - DPC-7.4 (1.58 mb)
DVD-Player - DPC-7.4 (1.58 mb)