Stimmen - 4, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
With the display panel shut, use the remote to control the Player. Connecting to a Stereo Component By connecting the digital output (SPDIF) on the DVD player through a coaxial cable (optional accessory) to a Dolby Digital/DTS amplifier or processor, you can enjoy full 5.1 channel surround sound. Follow these steps for making the connection. 1. Turn off both DVD player and your stereo system. 2. Connect the SPDIF to your stereo system as illustrated below. 3. Slide INPUT/OUTPUT to OUTPUT. 4. Turn on power of DVD player. Coaxial terminal connecting stereo system COAXIAL Coaxial cable Coaxial cable SPDIF(black) COAXIAL(black) Depending on your amplifier system, you need to make the following selection from MENU: 1. Refer to Changing Audio Output on page 26. 2. Select SPDIF/RAW if your amplifier has 5.1-channel decoder. 3. Select SPDIF/PCM if your amplifier has 2 channels. 4. Select OFF, if there is no digital signal output from the DVD player. Using the Card Reader The player has a 3-in-1 card reader, accepting MMC(Multimedia card), SD (Secure digital card) and MS (Memory stick). Inserting a memory card 1. Make sure that no disc is placed on the Player. 2. Insert the card into the slot with the gold contacts facing down. Gently push the card in all the way until the card is fixed in place. 3. Slide INPUT/OUTPUT to OUTPUT. WARNING: Be careful not to insert the card in the wrong direction, or it is forced in, the card may be damaged, or data on the card may be lost or corrupted. If the player is not recognizing the card, or if it does not fit correctly, re-orientate the card and try reinserting it. Removing a memory card You can remove the card anytime even it is playing. To remove a card, grasp the end of the card and remove the card from the slot. Playing a memory card 1. Insert the card and the screen will display the MP3 playback (default). Use direction key ( ^Ў and <> ) to select the file and press ENTER to play. 2. To access other file format, such as JPEG and DivX, press < or > twice to move the cursor to the “Media Selection “at the lower right of the screen and press ENTER to make the selection. 3. Press ^ to move the cursor to the file-list and use ^Ў to select file to play. Using the USB Port The player accepts most USB devices such as MP3, DSC, USB- drive, Digital Camcorder etc. The USB in this player is version 2.0. Plugging in a USB device 1. Remove the disc from the player. 2. Plug in the USB device to the USB port on the player. 3. Slide INPUT/OUTPUT to OUTPUT. Removing a USB device You can remove the USB device anytime even it is playing. To remove the USB device, simply grasp the end of the USB and remove it from the slot. Playing a USB device 1. Insert the USB device and the screen will display the MP3 playback (default). Use direction key ( ^Ўand <> ) to select the file and press ENTER to play. 2. To access other file format, such as JPEG and DivX, press < or > twice to move the curser to the “Media Selection “at the lower right of the screen and press ENTER to make the selection. 3. Press ^ to move the cursor to the file list and use ^Ў to select file to play. Using the AC Adapter This portable DVD player can be powered by AC through the supplied switching power AC adapter. It can also use the Supplied battery pack to power. When the AC adapter is connected to the unit and powered, the unit will be automatically powered by the AC power. AC adapter Power cord To home power outlet To DC12V IN on the DVD player Important ! Always turn off the DVD Player before connecting or disconnecting the AC cord. Only use the AC adaptor supplied with this Player. Using a different type of adaptor may cause malfunction or damage to the product. When the AC adaptor is used for prolonged period of time, the adaptor may heat up, this is normal and is not a cause for concern. When not using the adaptor, unplug it from the outlet. Using the Battery Pack Installing the battery pack Removing the battery pack 1. Align and insert the battery 2. Slide the battery pack to the 1. Slide down the latch. 2. Slide the battery pack to the pack into the corresponding left until it clicks into place. right, and remove. slots on the back of the unit. Charging the battery pack 1. Attach the battery pack to the Player. 2. Use the AC adaptor to charge the battery pack. Make the connection as illustrated below. To DC12V IN on the DVD player LED Indicator During charging, the red and green LEDs blink alternatively. When the battery is fully charged, the orange LED stays lit. When the Player uses battery for power, the red LED lights. If the battery power is low, the red LED blinks. 3. Slide POWER to ON. (The Player must be turned on to charge the battery). AC adaptor Power cord To home power outlet Cautions in Using Battery Pack Danger! Strictly follow these safety information when using the battery pack, otherwise, a short circuit, overheating, smoke, fire, or damage to the product may result. Never disassemble or modify the batt...