Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
CONNECTING TO A TV Antenna/Cable signal A/V-compatible or wide screen TV To Right (red) and Left (white) To AUDIO INPUT jacks To AUDIO OUT jacks [Fig. 1] ANT-IN AUDIO OUT S-VIDEO OUT AUDIO OUT DIGITAL AUDIO OUT COAXIAL Y Cb Cr L R COMPONENT VIDEO OUT DVD/VCR VCR DVD To VIDEO OUT jack To VIDEO INPUT jack To ANT. IN of TV Notes .Connect the DVD/VCR COMBINATION UNITS directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system. –13– EN 1L25 CONNECTING TO A TV THAT HAS AN S-VIDEO INPUT JACK OR COMPONENT VIDEO IN JACKS CONNECTING TO A TV THAT HAS AN S-VIDEO INPUT JACK OR COMPONENT VIDEO IN JACKS FOR TVs WITH S-VIDEO INPUT JACK Use an S-Video cable (commercially available) in place of the yellow video cable to enjoy higher quality pictures. The S-Video connection only supplies video (picture) in the DVD mode of the DVD/VCR COMBINATION UNITS. Therefore, in order to use the VCR features or view TV channels on the DVD/VCR COMBINATION UNITS, you still need to either connect the RF cable between the ANT-OUT jack of the DVD/VCR COMBINATION UNITS and the TV’s Antenna In jack, or connect the yellow video cable as described earlier (Fig.1). To connect the supplied RF cable, see “DVD/VCR TO TV CONNECTION” on page 13. ANT-IN AUDIO OUT S-VIDEO OUT AUDIO OUT DIGITAL AUDIO OUT Y COMPONENT VIDEO OUT AUDIO IN DVD/VCR VCR DVD R L To S-VIDEO OUT jack To S-VIDEO INPUT jack To Right (red) and Left (white) To AUDIO OUT jacks To AUDIO INPUT jacks A/V-compatible or wide screen TV [Fig. 2] FOR TVs WITH COMPONENT VIDEO IN JACKS Use a component video cable (commercially available) in place of the yellow video cable to enjoy higher quality pictures. The component video connection only supplies video (picture) in the DVD mode of the DVD/VCR COMBINATION UNITS. Therefore, in order to use the VCR features or view TV channels at the DVD/VCR COMBINATION UNITS, you still need to either connect the RF coaxial cable between the ANT-OUT jack of the DVD/VCR COMBINATION UNITS and the TV’s Antenna In jack, or connect the yellow video cable as described earlier (Fig. 1). To connect the supplied RF cable, see “DVD/VCR TO TV CONNECTION” on page 13. To Right (red) and Left (white) To Right (red) and Left (white) AUDIO INPUT jacks AUDIO OUTPUT jacks A/V-compatible or wide screen TV To COMPONENT VIDEO To COMPONENT VIDEO [Fig. 3] INPUT jacks OUT jacks CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL INPUT JACKS SUCH AS MD DECK OR DAT DECK Use an audio coaxial digital cable (commercially available) for the audio connections. Connecting to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck. Amplifier equipped with digital input jacks, MD deck, DAT deck, etc. [Fig. 4] ANT-IN ANT-OUT VIDEO OUT AUDIO OUT S-VIDEO OUT AUDIO OUT DIGITAL AUDIO OUT COAXIAL Y Cb Cr L R COMPONENT VIDEO OUT AUDIO IN VIDEO IN DVD/VCR VCR DVD R L To COAXIAL DIGITAL AUDIO INPUT jack To COAXIAL DIGITAL AUDIO OUT jack Notes .The audio source on a disc in the 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck. .Set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a DVD disc using incorrect settings may generate noise distortion, and may also damage the speakers. (See page 29 to set DOLBY DIGITAL to ON) –14– EN 1L25 CONNECTING TO A DOLBY DIGITAL DECODER CONNECTING TO A DOLBY DIGITAL DECODER If using this DVD/VCR COMBINATION UNITS to play a DVD disc in 5.1 channel Dolby Digital surround, the DVD/VCR COMBINATION UNITS outputs a Dolby Digital data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the DVD/VCR COMBINATION UNITS up to a Dolby Digital decorder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound of a professional standard such as can be heard in movie theaters. Use an audio coaxial digital cable (commercially available) for the audio connections. ANT-IN ANT-OUT VIDEO OUT AUDIO OUT S-VIDEO OUT AUDIO OUT DIGITAL AUDIO OUT COAXIAL Y Cb Cr L R COMPONENT VIDEO OUT AUDIO IN VIDEO IN R L To COAXIAL DIGITAL AUDIO OUT jack To COAXIAL DIGITAL AUDIO INPUT jack Front speaker (left) Center speaker Front speaker (right) Surround speaker (left) Surround speaker (right) Subwoofer Dolby Digital decoder DVD/VCR VCR DVD [Fig. 5] .If the output is Dolby Digital audio, connect to a Dolby Digital decorder, and set DOLBY DIGITAL to ON for audio output in the setup mode. .Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. CONNECTING TO AN ANALOG AUDIO Stereo system ANT-IN AUDIO OUT S-VIDEO OUT AUDIO OUT DIGITAL AUDIO OUT Y Cb L COMPONENT VIDEO OUT AUDIO IN DVD/VCR VCR DVD R L To Right (red) and Left (white) AUDIO OUT jacks To ANALOG AU...