Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
1 Connect
2 Set up
Start with the ‘Basic Connection.’
If you have a VCR, follow the instructions for ‘Connection with a VCR or similar device’.
Basic Connection
Connection with a VCR or
A
B
Finding the viewing channel
Initial Installation
similar device
A Press SETUP
on the remote
Your new Philips recorder replaces the VCR for your
L
To antenna
control.
Television (rear)
recording needs. First, unplug all the connections from
STANDBY-ON
or set-up
your VCR.
R
box
Philips recorder (front panel)
Setup Menu - General
English
A Press STANDBY-ON on the
Screen Saver
On
L
To antenna
recorder.
Television (rear)
Reset Menu Settings
OK
or set-up
R
box
B Turn on the TV set.
Note If connected to your VCR, make sure
B
D
it is turned off or in standby mode before
To AC
proceeding.
E
power
R
VIDEO (CVBS)
INPUT
VIDEO (CVBS)
Note Use up
and down
keys to toggle
PR
COMPONENT
Y
OUTPUT
EXT 1
VIDEO
L
L
L
L
F
TV-OUT
ANTENNA-IN
C Press ‘0’ and then the Channel Down button on
EXT 3
HDMI
R
R
R
R
~
MAINS
EXT 2
PR
PB
Y
COAXIAL
PB
through the options. Select an item by pressing
S-VIDEO (Y/C)
AUDIO
AUDIO
COMPONENT VIDEO
S-VIDEO (Y/C)
(DIGITAL AUDIO)
AUDIO
Philips recorder
the TV’s remote control repeatedly until you
C
right
. To confi rm a setting, press OK
.
(rear)
see this screen. This is the correct viewing
channel for the recorder.
B
Philips recorder
Select the OSD language.
Remain in
mode, select { On Screen
VIDEO (CVBS)
(rear)
OUT 1 PR
COMPONENT
Y
OU
VIDEO
VIDEO (CVBS)
INPUT
VIDEO (CVBS)
PR
COMPONENT
Y
OUTPUT
EXT 1
Display Language } and press right to
VIDEO
L
L
L
L
L
L
TV-OUT
ANTENNA-IN
EXT 3
HDMI
R
R
R
R
~
MAINS
EXT 2
PR
PB
Y
COAXIAL
PB
S-VIDEO (Y/C)
AUDIO
AUDIO
COMPONENT VIDEO
S-VIDEO (Y/C)
(DIGITAL AUDIO)
AUDIO
access the options.
R
R
B
Select the desired language option and
OUT 2
PB
COAXIAL
S-VIDEO (Y/C)
AUDIO
(DIGITAL AUDIO)
press OK
to confi rm your selection.
To AC
power
C
VIDEO OUT
Setup and install TV channels.
(CVBS)
C
L
A
AUDIO
Before connecting, unplug the antenna cable
Highlight
and press right .
OUT
R
D
that is currently connected to your TV.
Select { Tuner Input Source } and press
VCR or similar device (rear)
Note You may press the AV or SELECT button
OK
.
B Connect the antenna cable to the ANTENNA-
on the TV’s remote control (if available) to
{ Cable } – if the recorder is connected directly
IN
jack on the recorder.
A Follow the steps under ‘Basic Connections’ to
select the correct viewing channel. See your
to the cable signal or through a set-top box.
before you proceed to step B below.
TV’s user manual.
C Use the supplied RF coaxial cable to connect the
{ Air } – if the recorder is connected directly to
TV-OUT
jack on this recorder to the
an indoor or outdoor antenna.
B Use a yellow video cable (not supplied) to
Antenna In jack on the TV.
connect the VIDEO (CVBS) INPUT jack on
Note Press OK
to confi rm your selection.
this recorder to the yellow VIDEO OUT jack on
D Use the supplied video cable (yellow plug) to
the VCR.
Select { Channel Search } and press OK
connect the VIDEO (CVBS) OUTPUT jack on
on the remote control to start automatic TV
this recorder to the VIDEO IN jack on the TV.
C Use another red and white audio cable (not
channel search.
supplied) to connect the AUDIO INPUT jacks
E Use the supplied audio/video cable (red/ white
on this recorder to the red and white AUDIO
plugs) to connect the AUDIO OUTPUT jacks
D Set the date and time.
OUT jacks on the VCR.
on this recorder to the AUDIO IN jacks on the
Highlight
and press right .
TV.
Select { Date (mm/dd/yy) } or
D Connect the power cable from your VCR to an
{ Time (hh:mm:ss) } and press OK
.
AC power outlet.
F Connect the power cable from the recorder to
Use
the
numeric keypad 0
-9
an AC power outlet.
Note In this setup, the VCR cannot record TV
to input the date/time, then press OK
to
programs.
confi rm.
Note To further fi ne-tune the date and time
For additional connection diagrams, see the
settings, see the user manual “CLOCK
accompanying User Manual.
Settings”.
E Press SETUP
to exit.