You can only open the oven door again once the cooking compartment has cooled down slightly. Do not attempt to push in the latch by hand. Do not attempt to open the oven door while the cleaning programme is in operation. The cleaning process may be cancelled. The lamp is not lit in the cooking compartment during cleaning. : Risk of fire! The outside of the oven becomes very hot. Make sure that nothing is placed against the front of the oven. Never hang flammable objects, e.g. tea towels, on the door handle. Keep children at a safe distance. Before cleaning The oven must be empty. Take any accessories, ovenware and shelves out of the oven. Please see the Care and cleaning section for how to unhook the rails. Clean the oven door and the along the edges of the cooking compartment in the area around the seal. Do not scrub the seal. Make sure that the oven door is closed before you start cleaning. : Risk of fire! Loose food residues, grease and meat juices may catch fire. Wipe out the cooking compartment with a damp cloth. Cleaning accessories at the same time The shelves are not suitable for the self-cleaning programme. Take them out of the cooking compartment. If you wish to clean accessories at the same time, you can buy accessory holders. You can obtain the accessory holders from the after-sales service or on the internet using the material number 466546. The accessory holders are inserted on the left- and right-hand sides. You can use the holder to clean enamelled accessories without a non-stick coating at the same time, e.g. the universal pan. Always only clean one accessory at a time. Non-enamelled accessories, e.g. the wire rack, are not suitable for the self-cleaning programme. Remove them from the cooking compartment. : Risk of serious damage to health.! Never clean non-stick baking trays and baking tins at the same time using the self-cleaning programme. High temperatures damage the non-stick coating and poisonous gases are released. Note: For details on which accessories are suitable for the self- cleaning programme, please see the optional accessory table at the start of these instructions. Setting the cleaning level 1. Set the operating mode selector to x. 0 appears in the temperature display. 2. Use the temperature selector to set the cleaning level. Pyrolytic cleaning starts after a few seconds. The clock display shows the cleaning duration. The oven will start up after a few seconds. The time starts counting down. After the programme starts, the oven door locks. Once cleaning has finished 0:00 appears in the clock display and yflashes. Set the operating mode selector to o and press the KJbutton once. You can only open the oven door once the oven has cooled down. Cancelling cleaning Turn the operating mode selector back to U. You can only open the oven door once the oven has cooled down. Changing the cleaning level Once the programme has started, you can no longer change the cleaning level. Setting cleaning to run overnight So that you can use your oven throughout the day, delay the end of the cleaning process to during the night. Make settings as described in steps 1 and 2. 1. Press the KJclock function button until theysymbol appears. 2. Set the End of operation to a later end time using the rotary selector. The oven switches to standby. The display shows the time of day. When the oven starts, you can see the time counting down. After cleaning Once the cooking compartment has cooled down, wipe out the ash that has been left behind in the cooking compartment with a damp cloth. Care and cleaning With good care and cleaning, your oven will remain clean and fully-functioning for a long time to come. Here we will explain how to maintain and clean your oven correctly. Notes ¦ Slight differences in the colours on the front of the oven are caused by the use of different materials, such as glass, plastic and metal. ¦ Shadows on the door panel which look like streaks, are caused by reflections made by the oven light. ¦ Enamel is baked on at very high temperatures. This can cause some slight colour variations. This is normal and does not affect their function. The edges of thin trays cannot be completely enamelled. As a result, these edges can be rough. This will not impair the anti-corrosion protection. Cleaning agents To ensure that the different surfaces are not damaged by using the wrong cleaning agent, observe the information in the table. Do not use ¦ aggressive or abrasive cleaning agents, ¦ cleaning agents with a high concentration of alcohol, ¦ hard scouring pads or sponges, ¦ high-pressure cleaners or steam cleaners. Wash new sponge cloths thoroughly before use. Cleaning the hook-in racks Area Cleaning agents Oven front Hot soapy water: Clean with a dish cloth and dry with a soft cloth. Do not use glass cleaners or glass scrapers. Stainless steel Hot soapy water: Clean with a dish cloth and dry with a soft cloth. Remove flecks of limescale, grease, starch and albumin (e.g. egg white) immediately...

Dieses Handbuch ist für folgende Modelle:
Backöfen - B15P42N3AU/49 (1.21 mb)