Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
The inner door panel on the appliance door has a coating which reduces the temperature and reflects the heat. The view through the appliance door is not impaired by this. When the appliance door is open, this coating can have the effect of a light-coloured film. This is part of the design and is not due to any quality defect. Cleaning the cooking compartment Caution! Risk of damaging the surface. Do not clean the appliance while still warm, even if using oven cleaners specially intended for this purpose. Notes ¦ Enamel is baked on at very high temperatures during manufacture. This can cause some slight colour variation. This is normal and does not affect proper functioning. ¦ The edges of thin trays cannot be completely enamelled. As a result, these edges can be rough. Anti-corrosion protection is still guaranteed, however. Appliance part Cleaning agent/ aid Enamel surfaces (smooth surfaces) To facilitate cleaning, you can switch on the interior lighting and detach the appliance door if necessary. Apply commercially available washing- up liquid or a vinegar solution with a soft, damp cloth or chamois; dry with a soft cloth. Loosen baked on food residues with a damp cloth and detergent. We recommend using oven cleaning gel if the oven is very dirty. This can be applied neat to the affected area. Leave the cooking compartment open to dry after cleaning. Self-cleaning surfaces (rough surfaces) Please see the notes in section: Self-cleaning surfaces Door seal Hot soapy water Hook-in rack/ telescopic shelf Hot soapy water Accessories Soak in hot soapy water, clean with a brush and sponge or wash in the dishwasher. Keeping the appliance clean To avoid getting the cooking compartment dirty, ¦ clean the cooking compartment after each use, as dirt will bake on the next time it is heated up, and this can only be removed with difficulty ¦ always remove flecks of limescale, grease, starch and albumin (e. g. egg white) immediately ¦ use 3 CircoTherm ® whenever possible. This operating mode creates less dirt ¦ Use the universal pan to bake very moist cakes ¦ use suitable ovenware when roasting (e.g. roasting dish) or a roasting sheet (see section: Accessories) Self-cleaning surface The back wall of the cooking compartment is coated with self- cleaning enamel. This coating absorbs and disintegrates splashes from baking and roasting while the oven is in operation. Large splashes only disappear after the oven has been used several times. Discolouration on the rear wall does not affect the self-cleaning function. Caution! Damage to surfaces on self-cleaning areas due to applying oven cleaner. Never clean the self-cleaning surfaces with oven cleaner. If oven cleaner accidentally gets onto self-cleaning surfaces, remove it immediately with a sponge and plenty of water. Caution! Damage to surfaces on self-cleaning areas due to the use of abrasive and acidic cleaning agents and aids. Do not use cleaning agents containing abrasive substances or acids. Do not use abrasive cleaning aids such as steel wool or scourers. EasyClean ® Your appliance comes with an > EasyClean ® function to make cleaning the cooking compartment easier. An automatically controlled vaporisation of soapy water loosens residues and makes it easier to remove them afterwards. In the case of persistent dirt, you can ¦ allow the soapy water to penetrate for a while before switching on EasyClean ¦ rub detergent onto the dirty surfaces before switching on the cleaning aid ¦ repeat the EasyClean® function once the cooking compartment has cooled Preparation and switching on EasyClean ® only starts when the cooking compartment is cool. a= Risk of scalding and surface damage! Never pour water into the cooking compartment when it is hot. Water vapour will be created and the enamel may be damaged because of the change in temperature. 1. Remove the accessories from the cooking compartment. 2. Carefully pour 0.4 litres of water (not distilled water) with some detergent into the base trough of the cooking compartment ( Fig. A) . 3. Close the appliance door. 4. Switch on > EasyClean® . “’ † appears in the temperature display. If, after EasyClean is switched on, • or oe and “’ † appear alternately in the temperature display, the cooking compartment is not completely cooled. Wait until the cooking compartment has cooled down and switch EasyClean® on again. Once EasyClean® has finished the cooking compartment light switches on. A signal sounds. 5. Press the KJclock function button to exit the clock function. Cleaning up and switching off Do not leave the remaining water in the cooking compartment for a long time ( e.g. overnight) . 1. Open the appliance door and remove the remaining water with an absorbent sponge cloth (Fig. B) . 2. Clean the cooking compartment with a sponge cloth, a soft brush or a plastic saucepan scrubber. Note: You can remove any remaining, persistent residue with a glass scraper for glass ceramic. 3. Remove limescale with a cloth soaked in vinegar, then ...
Dieses Handbuch ist für folgende Modelle:Backöfen - B45E62N0/35 (1.92 mb)