Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Setting the language The preset language appears in the display. 1 Turn the rotary selector to select the required display language. 2 Confirm with ™ . Only use the accessories as specified. The manufacturer accepts no liability if these accessories are used incorrectly. Setting the time format The two possible formats 24h and AM/PM appear in the display. The default is the 24h format. 1 Use the rotary selector to select the desired format. 2 Confirm with ™ . Setting the clock The time is shown in the display. 1 Set the desired time using the rotary selector. 2 Confirm with ™ . Setting the date format The three possible formats D. M. Y, D/ M/ Y and Y/ M/ D appear in the display. The default is the D.M.Y format. 1 Use the rotary selector to select the desired format. 2 Confirm with ™ . Setting the date The preset date appears in the display. The day setting is already active. 1 Set the day using the rotary selector. 2 Touch the C symbol to switch to the month setting. 3 Set the month using the rotary selector. 4 Touch the C symbol to switch to the year setting. 5 Set the year using the rotary selector. 6 Confirm with ™ . Ending initial set- up "Initial set-up complete" appears in the display. Confirm with ™ . The appliance enters standby mode and the standby screen appears. The appliance is now ready for operation. Heating up the oven Ensure that no packaging remnants have been left in the cooking compartment. To remove the new cooker smell, heat up the oven when it is empty and closed. One hour with H Hot air at 200° C is ideal. For instructions on how to set this type of heating, refer to the Operating the appliance section. Cleaning accessories Before using the accessories for the first time, clean them thoroughly using hot detergent solution and a soft cloth. Activating the appliance Standby The appliance goes into standby mode if no function has been set or the child lock is activated. The brightness of the control panel is dimmed in standby mode. Notes . Different displays are available for standby mode. The default setting is the GAGGENAU logo and the clock. To change the display, refer to the Basic settings section. . The brightness of the display depends on the vertical viewing angle. You can adjust the display using the " Brightness" setting in the basic settings. Activating the appliance To exit standby mode, you can either: . turn the function selector, . touch a control panel, . or open or close the door. You can now set the required function. Please refer to the corresponding sections for information on how to set functions. Notes . If no settings are implemented for a long period of time after activation, the standby screen will reappear. . When the door is open, the interior lighting goes out after a short time. Operating the appliance Cooking compartment The cooking compartment has four shelf positions. The shelf positions are counted from the bottom up. Caution! – Do not place anything on the cooking compartment floor. Do not cover it with aluminium foil. A build- up of heat could damage the appliance. – Do not slide any accessories between the shelf positions, or they may tip. Always fully open the appliance door to the stop. In this position, the open door will not swing back by itself. Inserting accessories The accessories are equipped with a locking function. The locking function prevents the accessories from tilting when they are pulled out. The accessories must be inserted into the cooking compartment correctly for the tilt protection to work properly. When inserting the wire rack, check . that the lug (a) is pointing downwards . that the safety bar on the wire rack is at the back and facing upwards. Switching on 1 Set the required heating mode using the function selector. The chosen heating mode and the default temperature are displayed. 2 If you want to change the default temperature: set the required temperature with the rotary selector. The preheating symbol “ appears on the display. The bar continuously shows the preheating status. When the set temperature is reached, a signal sounds and the preheating symbol “ goes off. Note: The oven interior lighting stays switched off at a temperature setting below 70° C Switching off: Turn the function selector to 0. Rapid heating The "Rapid heating" function brings your appliance to the desired temperature quickly. To ensure an even cooking result, only put your food in the cooking compartment when the "rapid heating" phase is complete. You must activate the "Rapid heating" function in the basic settings ( refer to the Basic settings section) . Safety shut-off For your protection, the appliance is equipped with an automatic safety shut-off. Any heating process is switched off after 12 hours if the oven is not operated in this time. A message appears in the display. Exception: The long-term timer has been programmed. Confirm the message with ™ and set the function selector to 0, then the appliance can be operated again a...
Dieses Handbuch ist für folgende Modelle:Backöfen - BOP251210/02 (577.94 kb)
Backöfen - BOP251130/02 (577.94 kb)
Backöfen - BOP251110/02 (577.94 kb)
Backöfen - BOP251200/02 (577.94 kb)