Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Hotpoint-Ariston Dateigröße: 2.78 mb Dateiname: Unterrichtssprache:

Programmed cooking modes which have not started will not be restored and must be reprogrammed. S2| UNIVERSAL function All heating elements and the fan are activated. Since the heat remains constant throughout the oven, the air cooks and browns food in a uniform manner. A maximum of three racks may be used at the same time. If you are using several racks at the same time, we recommend you place the dripping pan on shelf level 1. If you are cooking on 3 levels at the same time, we recommend you place the shelves on racks 3 and 5, and the dripping pan on rack 1. Using the Small Space and Main Space at the same time Starting the oven 1. Fit the DIVIDER to the DIVIDER shelf "D" using the pin, with the arrows turned towards the rear part of the oven. After it has been fitted correctly, you will be able to read the text "OPENSPACE" on the front part of the DIVIDER frame. A buzzer will sound to confirm that the DIVIDER has been fitted correctly; it will then be possible to use the two Main and Small space compartments separately or at the same time. ! The EXTRALARGE SPACE FUNCTION knob will be disabled. ! In order to improve the oven's energy efficiency, the preheating time of the SMALL SPACE cavity lasts about 15 minutes. ! If the MAIN SPACE is set at a temperature below 150°C, in order to safeguard the cooking results, the grill function will not start: the display will visualise "OFF." 2. Select the desired cooking function for each recess by turning the SMALL SPACE FUNCTION and/or MAIN SPACE FUNCTION knobs. The |—| icon indicates that the Small Space has been selected and that it is therefore possible to adjust the Small Space settings; the |—| icon lit up on the display indicates that the Main Space has been selected and that it is therefore possible to adjust the Main Space settings. 3. Both ovens will begin the preheating stage. The temperature may be changed by turning the TEMPERATURE knob. The pH indicator light flashes during the pre-heating stage. 4. Once the pre-heating stage is completed, the HH icon stops flashing (becomes fixed) and a buzzer sounds. It is now possible to introduce foodstuffs into the oven. 5. The digits on the display become brighter to indicate which recess you are adjusting. To modify the settings for H ^ the other recess, press the ^ ц button. The Small Space and Main Space settings may actually be changed during simultaneous cooking: 9 - Change the cooking function by turning the SMALL SPACE FUNCTION and/or MAIN SPACE FUNCTION knob. - Change the temperature by turning the TEMPERATURE knob. - Set the cooking duration in addition to the cooking end time. - Stop cooking by turning the SMALL SPACE FUNCTION and/or MAIN SPACE FUNCTION knob to the "0" position. 6. If a blackout occurs while the oven is already in operation, an automatic system within the appliance will reactivate the cooking function from the point at which it was interrupted, as long as the temperature has not dropped below a certain level. Programmed cooking modes which have not started will not be restored and must be reprogrammed. Programming cooking ! A cooking function must be selected before programming can take place. Programming is possible in all oven configurations: EXTRALARGE, MAIN and SMALL SPACE, even if the latter two are being used simultaneously. Programming the cooking duration 1. Press the © button several times until the icon and the three digits on the DISPLAY begin to flash. 2. Turn the TIMER KNOB towards "+" and "-" to adjust the duration. 3. Press the © button again to confirm. 4. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds. • For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is programmed. The function will stop automatically at 10:15 a.m. Setting the end time for a cooking mode ! A cooking duration must be set before the cooking end time can be scheduled. 1. Follow steps 1 to 3 to set the duration as detailed above. 2. Next, press the © ■e) n and the three numerical digits on the DISPLAY begin to flash. 3. Turn the TIMER KNOB towards "+" and "-" to adjust the hour value. 4. Press the © button again so that the other two numerical digits on the DISPLAY begin to flash. 5. Turn the TIMER KNOB towards "+" and "-" to adjust the minute value. 6. Press the © button again to confirm. 7. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds. Programming has been set when the ^ and icons flash. The DISPLAY shows the cooking end time and the cooking duration alternately. To cancel programming, turn the FUNCTION knob to the "0" position. Practical cooking advice MULTILEVEL • Use positions 1, 3, 5 and 6. • Place the dripping pan at the bottom and the rack at the top. BARBECUE • Preheat the oven for 5 minutes. • Keep the oven door closed when cooking in this mode. • Place the dripping pan on shelf level 3. Place th...

Herunterladen

Geben Sie zwei Ziffern: