Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Hotpoint-Ariston Dateigröße: 3.97 mb Dateiname: Unterrichtssprache:

Unlock the door by pressing on the clamps F, then pull the door towards you lifting it out of its seat (see diagram).* 3. Grip the door on the two outer sides and close it approximately half way. Pull the door towards you lifting it out of its seat (see diagram).* To replace the door, reverse this sequence. Inspecting the seals Check the door seals around the oven periodically. If the seals are damaged, please contact your nearest After-sales Service Centre (see Assistance). We recommend not using the oven until the seals have been replaced. Replacing the light bulb To replace the oven light bulb: 1. Remove the glass cover of the lamp-holder. 2. Remove the light bulb and replace it with a similar one: Wattage 25 W, cap E 14. 3. Replace the glass cover (see diagram). Sliding Rack Kit assembly To assemble the sliding racks: 1. Loosen the two screws A (see diagram). If the oven is fitted with self-cleaning panels, these will have to be temporarily disassembled. 2. Replace the screws A with the screws and spacers (B + C) supplied with the kit. 3. Tighten the new screws B and the corresponding spacers C, fitting the self-cleaning panels on again. 4. Secure the two joints D of the guide rail in the holes provided on the oven walls (see diagram). The holes for the left guide rail are situated at the top, while the holes for the right one are at the bottom. 5. Finally, fit the guide rail on the spacer C. ! Do not place the sliding racks in position 5. * Only on certain models C B 23 Mode d’emploi FOUR Sommaire IT GB Italiano, 1 English,13 Français, 24 Español, 35 Portuges, 46 PyccKMM, 57 FC 832 C.1 /HA FC 832 C.1 IX/HA FC 83.1 /HA FC 83.1 IX /HA FQ 83.1 /HA FZ 83.1 /HA FZ 83.1 IX /HA FQ 932 C.1/HA FD 83.1 /HA FZ 93 C.1 /HA FZ 93 C.1 IX /HA FZ 932 C.1 /HA FZ 932 C.1 IX/HA FZ 83 C.1 /HA FZ 83 C.1 IX /HA F 83.1 /HA F 83.1 IX /HA F 937 C.1 IX /HA F 937 C.1 /HA FQ 837 C.1 /HA FH 837 C /HA FH 837 C IX /HA FHS 83 C IX/HA FH 83 /HA FH 83 IX/HA FH 82 C IX/HA FH 82 C /HA FH 831 C IX /HA FH 831 C /HA FH 83 C /HA FH 83 C IX /HA FH 93 C HA FH 93 C IX/HA Installation, 25-26 Positionnement Raccordement électrique Vue d'ensemble ES PT RS Tableau de bord Mise en marche et utilisation, 28 Mise en marche du four Utiliser le programmateur fin de cuisson Plaquette signalétique Le programmateur de cuisson électronique, 29 Programmes, 30-32 Programmes de cuisson Conseils de cuisson Tableau de cuisson Précautions et conseils, 33 Sécurité générale Mise au rebut Economies et respect de l'environnement Assistance Nettoyage et entretien, 34 Mise hors tension Nettoyage de l'appareil Nettoyage de la porte Remplacement de l'ampoule d'éclairage Montage du Kit glissières FR Installation ! Conservez ce mode d’emploi pour pouvoir le consulter à tout moment. En cas de vente, de cession ou de déménagement, veillez à ce qu’il suive l’appareil pour informer le nouveau propriétaire sur son fonctionnement et lui fournir les conseils corres...

Herunterladen

Geben Sie zwei Ziffern: