Unauthorized copying and distribution is a violation of law. EY6506-U1 1 SCHEMATIC DIAGRAM 2 WIRING CONNECTION DIAGRAM 2 EY6506-U1 3 DISASSEMBLY/ASSEMBLY INSTRUCTIONS HOW TO DISASSEMBLE MAIN UNIT. Ref. No. 1A Procedure 1A Removal of the Fixation cover and Housing. 1. Remove four screws tightened with the fixation cover and take it out. 2. Remove eight housing screws. Ref. No. 1B Procedure 1A > >>>> 1B Removal and attachment of the Motor. (Removal) 1. Take out the motor with the driving block fro

. GENERAL SAFETY GENERAL SAFETY LES -FOR ALL R RRU UULES - FOR ALL TTERY OPERA- -- B BBA AATTERY OPERAT TT EDED OOLS T TTOOLS ARNING! W WWARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVETHESE INSTRUCTIONS SAVE THESE INSTRUCTIONS ork Area W WWork Area 1) Keep your work area clean and welllit. Cluttered benches and dark areas invite accidents. 2) Do not operate power tools inexplos

(The display goes off when the overload condition is resolved.) Stop using the tool when this condition occurs. 3. Reading the battery capacity indicator during charging. (?) At the start of charging Part of the row of LED indicators lights up, according to the remaining battery capacity prior to charging. © During charging As charging progresse, additional LED indicators light up as the battery capacity increases. © Charging completed Confirm by the charging lamp(R)on the charger. (D ©

Cluttered areas and benches invite accidents. 2) CONSIDER WORK AREA ENVIRONMENT. Do not expose power tools to rain. Do not use power tools in damp or wet locations. Keep work area well lit. Do not use tool in presence of flammable liquids or gases. 3) GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded surfaces. For example; pipes, radiators, ranges, refrigerator enclosures. 4) KEEP CHILDREN AWAY. Do not let visitors contact tool. All visitors should be kept away from work are

DO NOT TOUCH THE CHUCK OR ANY FRONT METAL PARTS OF THE TOOL! Hold the tool only by the plastic handle to prevent electric shock in case you drill or drive into a “live” wire. 3) If the bit becomes jammed, immediately turn the main switch off to prevent an overload which can damage the battery pack or motor. Use reverse motion to loosen jammed bits. 4) Do not operate the reversing lever when the main switch is on. The battery will discharge rapidly and damage to the unit may occur. 5) During c

Make sure the bit is properly attached before use. Attaching or removing battery pack 1. To connect the battery pack: Insert the battery pack. It snaps into place to indicate proper connection. 2. To remove the battery pack: Press the two buttons on the sides of the battery pack. Slide the battery pack out of the tool body. Select the impact mode This unit is equipped with impact mode selector switch. By sliding the mode selector switch, soft impact mode or hard impact mode can be selecte

.GENERALSAFETYRULESFORALLBAT- TERYOPERATEDTOOLS WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVETHESEINSTRUCTIONSWorkArea 1) Keep your work area clean and welllit. Cluttered benches and dark areas invite accidents. 2) Do not operate power tools inexplosive atmospheres, such asin the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dus

Read manual completely before first using this product. SAVE THESE INSTRUCTIONS GENERAL SAFETY RULES-FOR ALL BATTERY OPERATED TOOLS SAVE THESE INSTRUCTIONS Work Area 1 ) Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. 2) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. 3) Keep bystanders, children, and visitors away whi

Removal Turn the lock collar counterclockwise (looking from the front), then remove the bit. Keep the bit in bit holder when not in use. Remove the battery pack to expose the bit storage compartment inside the handle housing. A bit up to 50 mm (t-31/32 inch) long can be stored here. 50mm Note: If excessive play occurs in the chuek, (D secure the drill in place and tighten the chuck by turning ® clockwise, (2) open the chuck claws by unscrewing the lock collar and © tighten the screw (left-

Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury. SPECIFIC SAFETY RULES 1) Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator. Symbol meaning V Volts --- Direct Current *1. no load speed „7 min r