Stimmen - 0, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
384292-00 DW160,DW161 Copyright © 1997,2002 The following are trademarks for one or more DeWALT power tools: the yellow and black color scheme; the “D” shaped air intake grill; the array of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the DW160-5/2/02 1:57 Page 3 INSTRUCTIVO DE OPERACION, CENTROS Y POLIZA INSTRUCTION MANUAL DE GARANTIA. ADVERTENCIA: LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. GUIDE D'UTILISATION MANUAL DE INSTRUCCIONES DW160/DW161 Right Angle Drill Perceuse d’angle Taladro de angulo recto DW160-5/2/02 1:57 Page 4 Double insulated tools are constructed layers of electrical insulation or one double between you and the tool’s electrical system. Tools built with this insulation system are not intended to be grounded. tool is equipped with a two prong plug which permits extension cords without concern for maintaining a ground connection. NOTE: Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system added protection against injury resulting from a possible electrical insulation failure within the tool. Double Insulation WARNING: When using electric tools, should always be followed personal injury, including the following: Important Safety English IF YOU HAVE ANY QUESTIONS OR ANY DEWALT TOOL, CALL US TOLL FREE AT: 1-800-4-DEWALT (1-800-433-9258) READ ALL INSTRUCTIONS CAUTION: WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS. Repair or replace damaged cords. Polarized Plugs Polarized plugs (one blade is wider than the other) are used on equipment to reduce the risk of electric shock. When provided, this plug will fit in the polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. CHUCK CHUCK GUARD PADDLE SWITCH DW160-5/2/02 1:57 Page 1 English Safety Instructions • KEEP WORK AREA CLEAN. Cluttered areas and benches injuries. • CONSIDER WORK AREA ENVIRONMENT. Don’t expose power tools to rain. Don’t use power tools work area well lit. Do not use tool or gases. • GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded surfaces. For example; pipes, refrigerator enclosures. • KEEP CHILDREN AWAY. Do not let visitors contact tool or extension cord. All visitors should be kept away from • STORE IDLE TOOLS. When not in use, tools should be stored in dry, and high or locked-up place — out of reach of children. • DON’T FORCE TOOL. It will do the job better and safer at the rate for which it was intended. • USE RIGHT TOOL. Don’t force small tool or attachment to do the job of a heavy-duty tool. Don’t use tool for purpose not intended. • DRESS PROPERLY. Do not wear loose clothing or jewelry. They can be caught in moving parts. Rubber gloves and non-skid footwear are recommended when working outdoors. Wear protective hair covering to contain long hair. Air vents often cover moving parts and should also be avoided. • USE SAFETY GLASSES. Also use face or dust mask if operation is dusty. • DON’T ABUSE CORD. Never carry tool by cord or yank it to disconnect from receptacle. Keep cord from heat, oil, and sharp edges. • SECURE WORK. Use clamps or a vise to hold work. It’s safer than using your hand and it frees both hands to operate tool. • DON’T OVERREACH. Keep proper footing and balance at all times. • MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer performance. and changing accessories. damaged, have repaired Inspect extension cords periodically handles dry, clean, and free from oil and • DISCONNECT OR LOCK OFF when not in use, before servicing, and when changing accessories, cutters. • REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches from tool before turning it on. • AVOID UNINTENTIONAL STARTING. Don’t carry tool with finger on switch. Be sure switch is off when plugging in. • EXTENSION CORDS. Make sure your extension cord is in good condition. When using an extension cord, be sure to use heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in of power and overheating. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord. Minimum Gage for Cord Sets Volts Total Length of Cord in Feet 120V 0-25 26-50 51-100 101-150 240V 0-50 51-100 101-200 201-300 Ampere Rating More Not more AWG Than Than 0- 6 18 16 16 14 6- 10 18 16 14 12 10 -12 16 16 14 12 12 - 16 14 12 Not Recommended • OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension cords intended for use outdoors and so marked. • STAY ALERT. Watch what you are doing. Use common sense. Do not operate tool when you are tired. 1 DW160-5/2/02 1:57 Page 2 English • CHECK DAMAGED Before fur...