Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Campbell Hausfeld Dateigröße: 202.95 kb Dateiname: Unterrichtssprache:

11. Do not use drill as a router or try to elongate or enlarge holes by twisting the drill. Drill bits may break and cause injury. NOTICE Each drill is equipped with a chuck capable of handling bits up to a certain size – see chart titled “Maximum Size Drill Bits.” Do not use bits larger than those recommended. Safety Instructions for Charger and Batteries ELECTRICAL SAFETY Before using battery charger, read all instructions on battery charger, battery pack, and product. 1. A battery-operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery. !DANGER Up to 24 volts DC present at charging terminals. Do not probe with conductive objects. Danger of electrical shock or electrocution. !DANGER If battery pack case is cracked or damaged, do not insert into charger. Danger of electrical shock or electrocution. !WARNING Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded. !WARNING Charger plugs must match the outlet. Never modify the plug in any way. Do not use adapter plugs with grounded chargers. Unmodified plugs and matching outlets will reduce the risk of electric shock. !WARNING Do not abuse cord. • Never carry charger by its cord. • Never pull the cord to disconnect from receptacle. Pull charger case rather than cord when disconnecting charger. 2. Do not operate charger with damaged cord or plug. • Have a damaged or worn power cord and/or strain relief replaced immediately. • Do not attempt to repair power cord. 3. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. 4. Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged. Take it to a qualified serviceman. 5. Do not disassemble charger or battery pack. Take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. 6. Do not use an extension cord unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric Minimum Wire Size (AWG) of Extension Cord for Length of Cord in Feet 25 50 100 150 AWG Size of Cord 18 18 18 16 shock. If an extension cord must be used, make sure: • That the size of the cord is at least as specified in chart titled “Minimum Wire Size (AWG) of Extension Cord for Battery Charger.” • That the pins on plug of extension cord are the same number, size and shape as those of plug on charger. • That the extension cord is properly wired and in good electrical condition. • If an extension cord is to be used outdoors it must be marked with the suffix “W-A” or “W” following the cord type designation to indicate it is acceptable for outdoor use. For example – SJTW-A 7. Unplug charger from outlet before attempting any maintenance or cleaning. 8. Charge the battery pack in a well-ventilated area. Do not allow any object to cover the charger and/or battery pack while charging. 9. Do not store the charger or battery pack in locations where the temperature may reach or exceed 105°F (40°C), such as a metal tool shed, or a car in the summer. This can lead to deterioration of the storage battery. 10. For optimal charging of the battery pack, charge it in temperatures between 65° -75° F (18°-24°C) . Do not charge the battery pack in an air temperature below 40°F ( 4° C), or above 105°F (40° C). Charging the battery outside of this range can adversely affect battery performance. 11. Do not charge battery in damp or wet locations. 12. Do not charge battery pack if it feels hot to the touch. Wait for it to cool. 13. Do not expose charger to rain, snow or frost. 14. Do not incinerate battery pack. It can explode in a fire. 15. Battery charger is not intended for any other uses other than charging the rechargeable battery. Any other uses may result in risk of fire, electrical shock, or electrocution. 16. The charger is ventilated through slots in the top and the bottom of the housing. Do not block the ventilation slots or place in a location where ventilation slots may become blocked. Intense heat and risk of fire may result. 3 Operating Instructions and Parts Manual DX111425CD & DX151905CD the total work life of the pack. For forward rotation, firmly press in on 5. Place tip of drill bit in dent made by clamp it securely in place. If a Safety Instructions Operation (Cont’d.) Discharging the pack beyond this point the lever marked FWD. For reverse center punch, hold drill square with backing block is not used withfor Charger and can damage the pack. rotation, firmly press in on the lever Do not use the work, and start the motor. spade bits or hole saws, ease up marked REV. power of the drill !CAUTION pressure as soon as bit point breaks NOT...

Herunterladen

Geben Sie zwei Ziffern: